Addresses Copilot review round 3. The proxy page's rejection message still
told operators to "update the validation logic", but the embedder check now
reads ALLOWED_ORIGINS, so name that setting as the fix instead.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HzuzRPJv7M8wGe3wyw5sSg
Signed-off-by: cliffhall <cliff@futurescale.com>
Add MCP_SANDBOX_FULL_ADDRESS and MCP_APP_ORIGIN_FULL_ADDRESS so a reverse
proxy or ingress deployment can advertise the sandbox proxy URL and the
_meta.ui.domain app origin the browser actually reaches, instead of the
bind-derived http://localhost:<port> ones. The process still listens on
MCP_SANDBOX_PORT / MCP_APP_ORIGIN_PORT.
Both values are validated in public-address.ts and refused (warned, bind-
derived address kept) when malformed or when their origin collapses onto
the Inspector UI's (or, for the app origin, the sandbox's) — the MCP Apps
spec requires host != sandbox origin, and the single-hostname proxy layout
is exactly the one that breaks it. Plain http under an https UI is warned.
The sandbox proxy page's referrer check was a hardcoded
http://localhost|127.0.0.1 pattern no https embedder could match. It now
compares the referrer's parsed origin against an exact list injected by the
controller, derived from the same filtered allow-list as its frame-ancestors
header, with the old loopback check kept only as the no-list fallback.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HzuzRPJv7M8wGe3wyw5sSg
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot review round 3 on #2100.
- MCP_APP_ORIGIN_PORT could equal CLIENT_PORT or MCP_SANDBOX_PORT. The
app-origin listener starts BEFORE the web server binds, so that is not a
race it loses — it wins the port and the Inspector dies with EADDRINUSE.
`CLIENT_PORT=6278` was a valid config before this feature existed. It now
resolves to a dynamic port with a warning: of the three listeners this is
the only one that can move, and refusing to boot would cost the user the
whole Inspector over a feature they may not be using.
- The proxy's same-origin refusal covered only its own origin. An app served
from the INSPECTOR's origin is no safer: same-origin with the top document
means direct access to window.top, its DOM and its storage, and the
cross-origin frame in between buys nothing. Both trusted origins are now
refused before allow-same-origin is granted.
- Replaced the `as unknown as number` on `server.address()` with a real
narrowing of the string/null members of its return type.
- MCP_APP_ORIGIN_PORT added to the v1→v2 migration guide's env table, its
Docker recipe, and a troubleshooting entry for the symptom this actually
produces (the app renders, but its own backend rejects `Origin: null`).
- clients/web/README.md now states which failure is outside the fallback
guarantee — a published document the browser cannot reach — and why there
is no honest signal to fall back on. Docs and code no longer disagree.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0177mPHAdECD18nLLCTwR5rh
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot review round 1 on #2100.
- POST /api/app-document: `null` and `[1,2]` are valid JSON, so the
destructure that followed threw OUTSIDE the parse try/catch and turned a
malformed body into a 500 instead of the documented 400.
- app-origin controller: the error handler cleared `server` but not
`origin`, and `publish` gates on `origin` — so an error after a successful
listen kept minting URLs on a dead port and the browser never took the
srcdoc fallback. Clear both, and drop the now-unfetchable documents.
- sandbox proxy: drop a stale `srcdoc` before navigating to a dedicated
origin (srcdoc wins over src), and restore the opaque-origin posture —
strip `allow-same-origin`, reset `innerOrigin` — before assigning `srcdoc`
on the fallback path. Not reachable today (each render remounts the
iframe), but the cost of being wrong about that later is an isolation
boundary.
- publishAppDocument tests: replace two `as unknown as Response` casts with
real `Response`s.
- docs: `frame-ancestors` admits the proxy AND the Inspector page (every
ancestor is checked); the shared helper falls back to loopback, not
`'none'`; the showcase origin is `127.0.0.1`, the default bind address.
- tests: null/array body, post-listen error, and both factories receiving a
working `publishAppDocument`.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0177mPHAdECD18nLLCTwR5rh
Signed-off-by: cliffhall <cliff@futurescale.com>
An MCP App is rendered by handing its HTML to the sandbox proxy as
`srcdoc`, in a frame sandboxed without `allow-same-origin` — the #1565
isolation model. That gives the app document an opaque origin, so every
request it makes carries `Origin: null` and no CORS / OAuth-callback /
API-key allowlist can admit it. `_meta.ui.domain` is the spec field a
server uses to ask its host for a stable, dedicated origin, and it was
being dropped on the floor.
The field is explicitly host-dependent and the Inspector owns no domain
infrastructure, so it treats any non-empty value as a request rather than
an address, and answers with a real loopback origin on its own listener
(MCP_APP_ORIGIN_PORT, default 6276). One shared origin, path-keyed per
document: that delivers what the field is for without minting a port or
DNS name per app, and is therefore not a per-app isolation boundary.
The inner frame is granted `allow-same-origin` on this path only, which
is what makes the origin real. It is not a #1565 regression: the listener
is on its own port, so the app stays cross-origin to both the proxy and
the Inspector. The proxy refuses the grant if the URL's origin equals its
own, and the grant is never reachable from the server-supplied `sandbox`
string, which is still stripped. The per-app CSP is delivered as a real
response header there rather than only as a <meta>.
Every failure path falls back to the default srcdoc render with a console
warning naming the field, rather than blanking the app.
Also fixes a pre-existing `tsc -b` break on v2/main (useServers.test.tsx
passed `metadata: []` where `RequestMetadata` is expected), which has had
CI red since #2087 and blocks the pre-push gate.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0177mPHAdECD18nLLCTwR5rh
Signed-off-by: cliffhall <cliff@futurescale.com>
* refactor(web): sharpen src/lib vs src/utils rule and move misfiled modules (#1776)
Codify the empirical rule the web client already followed loosely — utils =
pure functions that compute; lib = things that instantiate, adapt, or touch
the environment — in AGENTS.md and clients/web/README.md, and move the modules
that sat on the wrong side of it.
Moves (source + co-located test):
- lib/sandbox-csp -> utils (pure CSP-string construction; type-only import)
- utils/browserTabVisibility -> lib (registers visibilitychange listeners)
- utils/oauthResume -> lib (reads/writes sessionStorage)
- utils/clearServerOAuthState -> lib (drives live InspectorClient / OAuthStorage)
Borderline audits (kept in place): pendingReauth (pure type declarations),
deepLink / correlateTransportErrors / mcpNetworkHeaders / oauthUx / oauthFlow /
oauthNetworkPhase (pure transforms / type-only core imports) stay in utils;
downloadFile stays whole in lib (dominant side is DOM side effects).
Also relocate the lone src/test/lib/downloadFile.test.ts straggler beside its
source at src/lib/downloadFile.test.ts, and document the test-placement rule
(side-by-side by default; src/test/ only for core/ tests, the integration
project, and shared scaffolding).
Pure move — no behavior change; no build/coverage config keys off the boundary.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XNdjEPKLG637X8YmhDiEk5
* refactor(web): address review — fix stale paths, move customHeaders, one-way arrows (#1776)
Responds to the @claude review on PR #1784:
1. Stale path references (fixed): update the four in-repo pointers left at
pre-move paths — specification/v2_auth_mid_session.md (oauthResume,
browserTabVisibility → lib/), and the two load-bearing sandbox security
comments (sandbox_proxy.html, sandbox-controller.ts → src/utils/sandbox-csp).
2. lib/types/customHeaders (moved): it's pure (types + pure transforms), the
rule's clearest counterexample. Moved lib/types/customHeaders.{ts,test.ts} →
utils/ (no external importers; only its own test) and removed the
undocumented lib/types/ subdir. Documented that utils/ is the home for pure
shared domain types + their constructors — no separate types/ bucket.
3. One-way arrows (item 3): declare OAuthResumeAuthKind in utils/pendingReauth
and re-export it from lib/oauthResume, so the only cross-directory arrow now
points lib → utils. Codified that invariant in AGENTS.md.
Wording nit: AGENTS.md + README now state diagnostic logging
(console.warn/error) doesn't count as a side effect for the utils rule.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XNdjEPKLG637X8YmhDiEk5
* docs: address review round 2 — stale customHeaders refs, rule wording (#1776)
Doc-only follow-up to the round-2 @claude review on PR #1784 (no code changed):
1. Stale paths (same class as round-1 item 1): the customHeaders move left
three references to the deleted lib/types/customHeaders.ts path in
specification/ (v2_ux_interfaces_phase_0_4_inventory.md,
v2_ux_interfaces_plan.md ×2) — updated to utils/customHeaders.ts.
2. customHeaders anchor: note in AGENTS.md that its shape is staged for
ServerSettingsForm (per v2_ux_interfaces_plan.md), so its zero-importer
state reads as intentional rather than rot; kept as the no-types/-bucket
illustration and led the anchor list with load-bearing modules.
3. Type-only-import clause: split the conflated clause — a type-only import
(pendingReauth) and re-exporting core's pure functions/constants
(oauthUx/oauthFlow) are distinct reasons to stay in utils; what makes a
module lib is wrapping core's stateful runtime. Fixed in both AGENTS.md
and the web README.
Cosmetic: re-padded the v2_auth_mid_session.md table row to column width.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XNdjEPKLG637X8YmhDiEk5
* docs: address review round 3 — scope the "no types/ bucket" claim (#1776)
Doc-only follow-up to the round-3 @claude review on PR #1784 (no code changed):
1. "no separate types/ bucket" overreached: clients/web/src/types/ does exist
(navigation.ts + react-syntax-highlighter .d.ts ambient stubs wired via
tsconfig.app.json paths). Scoped the claim in both AGENTS.md and the web
README to "no types/ sub-bucket INSIDE lib/utils", and noted src/types/ is
for ambient .d.ts stubs, not domain types.
2. README example list drifted from AGENTS.md's round-2 load-bearing anchors —
realigned it (inspectorTabs/mcpNetworkHeaders, dropped the zero-importer
customHeaders from the headline list).
3. Clarified v2_ux_interfaces_plan.md:185 so the v2 path reads as the copy's
destination, not as the v1.5 source location.
Follow-up filed as #1785 (board Todo): src/types/navigation.ts InspectorTab is
dead and duplicates utils/inspectorTabs.ts — kept out of this pure-move PR.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XNdjEPKLG637X8YmhDiEk5
* docs: address review round 4 — reconcile src/types/ claim with #1785 (#1776)
Doc-only follow-up to the round-4 @claude review on PR #1784 (no code changed):
The round-3 scope fix overshot: it asserted src/types/ holds "not domain types
at all", but the dead navigation.ts InspectorTab is a plain-.ts domain type
still living there, and specification/v2_ux_interfaces_plan.md:181-182 actively
prescribes placing InspectorTab there — so AGENTS.md and that spec doc gave
opposite guidance about the same directory.
- AGENTS.md + web README: softened to "not the place for new domain types"
and added a parenthetical that the one lingering domain type (dead
navigation.ts) is tracked for removal in #1785; until then a pure domain
type belongs in utils/, not src/types/.
- v2_ux_interfaces_plan.md:181: marked the tab-enum placement guidance as
superseded by #1785 (live type is InspectorTabId in utils/inspectorTabs.ts).
Self-heals on merge of #1785.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XNdjEPKLG637X8YmhDiEk5
* docs: address review round 5 — fix garbled #1785 clause, restructure utils rule (#1776)
Doc-only follow-up to the round-5 @claude review on PR #1784 (no code changed):
1. Grammar (item 1): the round-4 #1785 clause read "superseding [#1785] will
remove it" — a participle with no subject. Reworded to "the dead
navigation.ts InspectorTab, which #1785 will remove".
2. Readability (item 2): the src/utils/ bullet had accreted into a single
~1,400-char blob across five review rounds. Promoted the carve-outs to
scannable sub-bullets (Domain types / Diagnostic logging / Importing from
core) and lifted the src/types/ note out to its own line, since it's a
statement about a sibling directory, not about utils.
AGENTS.md only; the README's parallel sentence was already clean.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XNdjEPKLG637X8YmhDiEk5
* docs+config: address review round 6 — correct the coverage-glob claim (#1776)
Responds to the round-6 @claude review on PR #1784:
1. "no build/coverage glob" was factually wrong (should-fix): the web coverage
include in clients/web/vite.config.ts DOES enumerate src/lib/** and
src/utils/**. The conclusion (a move between them is coverage-neutral)
survives, but the reason was wrong. Reworded both AGENTS.md and the web
README to say nothing *enforces* the boundary — no path alias, and the
include lists both dirs so a move is coverage-neutral — plus the important
whitelist caveat: a module outside components/lib/utils/server falls out of
the ≥90 gate entirely.
2. Removed a pre-existing duplicate glob in vite.config.ts (src/lib/**/*.{ts,tsx}
appeared twice, lines 161 and 163). Inert (vitest de-dupes) but it sat three
lines from the config the doc now describes.
Nits: gave the README bullet the same round-5 sub-bullet restructure as
AGENTS.md, and made its #1785 reference a real markdown link (bare #N doesn't
autolink in rendered repo markdown).
npm run ci green (config change re-verified through coverage + smokes + Storybook).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XNdjEPKLG637X8YmhDiEk5
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* web: sandbox hardening — opaque-origin inner frame, srcdoc-only, frame-ancestors
Harden the MCP Apps sandbox isolation model:
- The inner (untrusted-widget) iframe is sandboxed WITHOUT `allow-same-origin`
(default "allow-scripts allow-forms") and any server-supplied sandbox value
has `allow-same-origin` stripped case-insensitively, so the widget runs under
an opaque origin and cannot reach the proxy's DOM to bypass its own CSP via
the parent realm.
- Widget delivery is `srcdoc`-only (no document.write), which respects the
opaque origin.
- The relay accepts the inner frame's "null" origin with
`event.source === inner.contentWindow` as the unforgeable identity check.
- sandbox-controller.ts serves the proxy with
`Content-Security-Policy: frame-ancestors http://127.0.0.1:* http://localhost:*`;
fetch directives are deliberately omitted so a srcdoc iframe's inherited
policy container does not override the per-app CSP.
Updated the isolation-model comments and the sandbox-controller integration
test asserts the frame-ancestors header (and the absence of fetch directives).
Closes#1565
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BrihGWcrM9JGRyu41nzZYw
* web: enforce per-app _meta.ui.csp in the app bridge + surface resource-read failures
- createAppBridgeFactory now builds each app's `_meta.ui.csp` host-side via the
sandbox-csp library (approveCspSources → buildSandboxCspPolicy) and wraps the
untrusted widget HTML with wrapSandboxedHtml so the CSP <meta> is always the
first <head> child before the HTML reaches the sandboxed iframe. The approved
(post-filter) csp + permissions are echoed back via hostCapabilities.sandbox
so the view sees what was granted. The csp is no longer sent inline through
sendSandboxResourceReady — it is enforced via the wrapped meta.
- A per-app copy of HOST_CAPABILITIES prevents the sandbox echo from mutating
the shared constant.
- New optional `onResourceError` dep on AppBridgeFactoryDeps routes resource
read/post failures to the caller (also always console.error'd) instead of
leaving a silent blank frame.
Closes#1566
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BrihGWcrM9JGRyu41nzZYw
* web: full hostContext delivery + live host-context-changed updates
- createAppBridgeFactory now seeds the full hostContext via
snapshotHostContext(iframe, HOST_AVAILABLE_DISPLAY_MODES): theme, styles
(Mantine design tokens), displayMode ("inline"), availableDisplayModes, and
containerDimensions — replacing the theme-only seed. The local currentTheme
helper is dropped in favor of hostContext.ts.
- AppRenderer gains `displayMode` and `containerRef` props and pushes live
host-context changes via the SDK's sendHostContextChange (partial
host-context-changed notifications), never a hand-maintained snapshot:
- theme + styles via a MutationObserver on <html data-mantine-color-scheme>,
- containerDimensions via a ResizeObserver on the host container (or the
iframe fallback), gated on `initialized`, skipping 0x0 and value-equal
repeats, plus a one-shot push on initialize once layout settles,
- displayMode whenever the prop changes (Maximize/Restore), gated on init.
Adds AppRenderer host-context tests (theme flip incl. resolved styles,
displayMode push + init gate, container-dimensions on init and resize, observer
teardown) and updates the factory + story mocks for the new hostContext shape
and sendHostContextChange method.
Closes#1567
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BrihGWcrM9JGRyu41nzZYw
* web: honor ui/notifications/size-changed and ui/request-display-mode
AppRenderer:
- New `onSizeChange` prop forwards the view's ui/notifications/size-changed
reports (via the bridge `sizechange` event).
- New `onRequestDisplayMode` prop backs an `onrequestdisplaymode` bridge handler
that returns the mode the host actually applied; with no handler the request
is declined by returning the current host-side mode (falling back to inline).
AppsScreen:
- Adds a host-controlled RendererContainer (measured for containerDimensions)
with an inner box sized by the view-reported height (`appHeight`), so
host→view container size and view→host size-changed don't couple.
- `handleSizeChange` records the reported height (ignored while maximized);
`displayMode` is derived from the maximize toggle and pushed to the view;
`handleRequestDisplayMode` filters against HOST_AVAILABLE_DISPLAY_MODES
(declining e.g. "pip") and maps fullscreen↔inline onto the maximize state.
Adds AppRenderer tests (size forwarding, request-display-mode apply/decline/
fallback) and AppsScreen tests (frame sizing on report, no-height ignore,
fullscreen/restore/decline via request-display-mode). Story mocks gain
sendHostContextChange/addEventListener.
Closes#1568
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BrihGWcrM9JGRyu41nzZYw
* web: honor ui/download-file with confirmation and http(s) allowlist
createAppBridgeFactory now advertises the `downloadFile` host capability and
attaches an `ondownloadfile` handler:
- Requires a host-mediated confirmation (window.confirm) listing the requested
file(s); a declined prompt or an empty payload returns isError without acting.
- Inline EmbeddedResources (text or base64 blob) are written to disk via the
shared downloadBlob object-URL anchor; base64 is decoded via base64ToBytes.
- ResourceLinks are opened in a new tab, restricted to http(s) by the shared
isHttpUrl allowlist (javascript:/data:/file:/malformed are rejected).
- Labels shown in the confirmation are sanitized (control + format chars
stripped, length clamped) so a server-supplied filename/URI can't inject
newlines or reflow the prompt.
- Partial-batch success is surfaced (isError only when nothing downloaded), with
skipped items warned.
Adds factory tests for the full download surface (text/blob/link, decline,
empty, throw, non-http rejection, label sanitization/clamping, partial batch).
Closes#1569
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BrihGWcrM9JGRyu41nzZYw
* web: surface ui/message and app logging in panels below the running app
AppRenderer:
- New `onMessage` prop backs an `onmessage` bridge handler that surfaces the
view's ui/message content and returns the spec-required empty result;
with no handler the submission is declined (isError).
- New `onLog` prop forwards MCP `notifications/message` log entries via the
bridge `loggingmessage` event, honoring the advertised `logging` capability.
AppsScreen:
- Adds `messages`/`appLogs` state (cleared with the reported height on
select/open/close/back via resetAppChannels) and `handleMessage`/`handleLog`.
- Renders a "Messages from app" panel (data-testid="apps-messages", reusing
ContentViewer) and a default-expanded collapsible "App logs" panel
(data-testid="apps-logs", reusing LogLevelBadge) with logger names and a
Clear button, both as pinned panels below the running widget.
Adds AppRenderer tests (log forward + no-handler no-throw, ui/message
route/empty-result/decline) and AppsScreen tests (message log render + empty
result + clear-on-close, log panel expand/collapse/clear).
Closes#1570
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BrihGWcrM9JGRyu41nzZYw
* web: stage partial input — replay tool-input-partial before final tool input
AppRenderer:
- New `partialInputs` prop (ordered fragments), snapshotted into pendingPartials
at bridge-build time (read via a ref so prop churn never rebuilds the iframe)
and cleared on dispose. flushPending replays them via
bridge.sendToolInputPartial BEFORE the complete tool-input, per spec.
AppsScreen:
- New `partialStages` state + `handleStagePartialInput` (snapshots current form
values). resetAppChannels gains a `keepPartials` option so Open App preserves
the staged fragments (they're consumed by the renderer) while select/close/
back clear them.
- Adds a "Stage partial input" control (fielded apps only) with a staged count
and "Clear staged", wired to AppRenderer's `partialInputs`.
Adds AppRenderer tests (ordered replay before tool-input; none when omitted) and
AppsScreen tests (stage/count/clear gated on fields; staged partials survive
Open and are replayed).
Closes#1571
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BrihGWcrM9JGRyu41nzZYw
* web: app lifecycle status + machine-readable data attributes on the Apps screen
AppRenderer:
- New AppRendererStatus ("loading" | "ready" | "error") + onAppStatusChange
callback. Fires "loading" at the start of every (re)build, "ready" on the
view's initialized signal, and "error" on a factory throw/rejection.
AppsScreen:
- appStatus/appError state; handleAppError captures the reason locally and
forwards to the parent onError. resetAppChannels clears both.
- Surfaces the contract as data-testid="apps-form" carrying data-app-status and
data-app-error, renders an error panel (data-testid="apps-error") in place of
the blank frame, and tags the stage button data-testid="apps-stage".
- AppDetailPanel's Open App button gains data-testid="open-app".
App.tsx:
- Wires the bridge factory's onResourceError to a red toast so a malformed/404
UI resource is no longer console-only (the renderer separately drives
data-app-status, so a driver times out on never-reaching-ready and reads it).
Documents the data-testid/data-* automation contract in clients/web/README.md.
Adds AppRenderer status-transition tests and AppsScreen status/error-panel
tests.
Closes#1572
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BrihGWcrM9JGRyu41nzZYw
* review: warn when server sandbox drops allow-scripts + revert incidental lockfile churn
Addresses the claude[bot] review on PR #1650:
- sandbox_proxy.html: log a console.warn when a server-supplied `sandbox`
value lacks `allow-scripts` after the `allow-same-origin` strip, so a
fail-closed (app-never-runs) sandbox is diagnosable instead of silent.
- Restore clients/{cli,launcher,tui,web}/package-lock.json to their
v2/main state — the earlier churn (@emnapi/@napi-rs optional deps, a
dropped version field) was incidental `npm install` regeneration
unrelated to the sandbox change.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BrihGWcrM9JGRyu41nzZYw
* review: document CSP-vs-permissions filtering asymmetry (PR #1652)
Address the claude[bot] review's finding #2: add a comment explaining why
`csp` is injection-filtered (approveCspSources) while `permissions` is passed
through verbatim — permissions is a structured boolean object consumed only by
the sandbox proxy's buildAllowAttribute() (fixed key→token mapping), so it
never reaches the iframe sandbox/allow attribute as raw text. No logic change.
Also merges v2/1565-sandbox-hardening (review fixes) up the stack.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BrihGWcrM9JGRyu41nzZYw
* test: lock in per-app HOST_CAPABILITIES isolation (PR #1652 round 2)
Add a test asserting the shared HOST_CAPABILITIES.sandbox stays undefined after
a sandboxready run sets hostCapabilities.sandbox — guards against a silent
regression if the per-app spread copy were ever dropped.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BrihGWcrM9JGRyu41nzZYw
* review: gate theme observer on initialized + document seed/dep assumptions (PR #1654)
Address the claude[bot] review:
- Finding #1 (applied): gate the theme+styles MutationObserver on the view's
`initialized` signal, matching the container/displayMode pushes — a theme
flip in the construction→handshake window no longer races ui/initialize. The
factory seeds the construction-time theme, and the first post-init flip
carries the current value. Added tests: pre-init flip is dropped; the live
flip test now completes the handshake first.
- Finding #2 (applied, comment): note in snapshotHostContext that the
`displayMode: "inline"` seed assumes inline-at-open (AppsScreen always opens
inline; #1568's displayMode push carries transitions).
- Finding #4 (applied, comment): explain why `containerRef` is a build-effect
dep yet doesn't force a rebuild (sameInputs ignores it; read lazily).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BrihGWcrM9JGRyu41nzZYw
* review: guard 0-height size reports, distinct RendererFrame, shared payload type (PR #1656)
Address the claude[bot] review:
- #1 (applied): handleSizeChange ignores a non-positive height — a view's
ResizeObserver can transiently fire 0 pre-layout/teardown, which would
collapse the frame; mirrors AppRenderer's 0×0 skip. Added a test.
- #2 (applied): reinstate a distinct `RendererFrame` constant for the inner
content-sized box so its role reads clearly vs. the outer RendererContainer.
- #3 (declined + comment): keep carrying `appHeight` across maximize→restore —
clearing it would flash the frame to full-card height until the next
size-changed; the carry-over restores at the prior size. Documented.
- #4 (applied): type handleSizeChange's param as AppBridgeEventMap["sizechange"]
so the payload shape has a single source of truth with AppRenderer's prop.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BrihGWcrM9JGRyu41nzZYw
* review: distinguish links, cap batch size, comment truncation (PR #1657)
Address the claude[bot] review:
- #1 (applied): the confirmation now reads "download or open N item(s)" and
resource_links are prefixed "↗" in the summary, so a link that opens in a tab
is distinguishable from an embedded file that saves to disk.
- #2 (applied): cap a single ui/download-file batch at MAX_DOWNLOAD_ITEMS (20);
an oversized batch is rejected (isError) before the prompt, with a warn.
- #3 (declined): can't check window.open's return value to detect a blocked
popup — we pass `noopener`, and per spec window.open returns null even on a
successful noopener open, so null can't distinguish blocked from succeeded.
- #4b (applied, comment): note the start-of-label truncation is intentional so a
link's scheme+host stays visible for the trust decision.
Adds tests: oversized batch rejected without confirming/acting; resource-link ↗
prefix in the summary.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BrihGWcrM9JGRyu41nzZYw
* review: skip embedded resource with neither text nor blob (PR #1657 round 2)
Address the round-2 observation: an untrusted EmbeddedResource carrying neither
`blob` nor a string `text` previously produced `new Blob([undefined])` — a file
containing the literal text "undefined", counted as success. Now such an item
is skipped (returns false, like a rejected link), so isError reflects it. Added
a test asserting no object URL is created and the batch reports isError.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BrihGWcrM9JGRyu41nzZYw
* review: type-honest formatLogData, cap channels, log-panel a11y (PR #1658)
Address the claude[bot] review:
- #1 (applied): formatLogData coalesces JSON.stringify(undefined) → "" so the
`: string` return type is honest for a data-less log.
- #2 (applied): cap retained messages/logs at MAX_APP_CHANNEL_ENTRIES (500) via
appendCapped — a chatty widget no longer grows the panels/DOM without bound
between Clear/close; oldest entries drop.
- #3 (declined): keep the Messages panel without a Clear/collapse — messages are
sparser and already cleared on close/switch; keeping it simple.
- #4 (applied): the App-logs toggle now has aria-controls pointing at the
Collapse region (id="apps-logs-region") for assistive tech.
Adds tests: no-data log renders (coalesce branch), 501 logs cap at 500 (oldest
dropped), aria-controls assertion.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BrihGWcrM9JGRyu41nzZYw
* review: stable id key for Messages panel (PR #1658 round 2)
Address the round-2 nit: give AppMessage a stable `id` (assigned via
nextMessageIdRef in handleMessage) and key the Messages panel on it instead of
the array index — so the appendCapped front-drop can't renumber keys once a run
exceeds the cap, matching AppLogEntry's treatment.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BrihGWcrM9JGRyu41nzZYw
* review: note partialStages intentionally survives handleOpen (PR #1659)
Address the claude[bot] review's observation #2: add a comment at the
handleOpen call site clarifying that partialStages is intentionally NOT cleared
there — AppRenderer snapshots the fragments into its own pendingPartialsRef at
build time, and the staging UI only renders while not running, so the surviving
state is invisible until the next reset drains it.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BrihGWcrM9JGRyu41nzZYw
* review: align error-panel docs with behavior + gate data-app-error on running (PR #1660)
Address the claude[bot] review:
- #1 (applied, docs): the error panel renders BELOW the (blank) frame, not in
place of it — the renderer stays mounted so a factory error still shows the
reason alongside the iframe (gating the frame off on error would drop the
auto-launched iframe an integration test relies on). Reworded the README row
and the test comment to say "below the frame"; added a code comment.
- #2 (applied): gate data-app-error on `running` (like data-app-status) so the
two attributes can't desync if a future path sets an error without running.
- #3 (no change): resource-read failures staying at data-app-status="loading"
(toast only) is intentional and documented.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BrihGWcrM9JGRyu41nzZYw
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* feat(web): port v1.5 dev backend (vite-hono-plugin + sandbox + remote-server bootstrap)
Ports the v1.5 in-process dev backend into v2 so `npm run dev` serves the
Hono remote-server (`/api/*`) alongside the Vite-served browser app. Without
this, the browser-side `createRemoteTransport` had nothing to talk to during
local development.
Adds under `clients/web/server/`:
- vite-hono-plugin.ts (Hono middleware on the Vite dev server; gated to
`apply: 'serve'` and skipped when `process.env.VITEST` is set so it stays
inert in vitest/storybook runs)
- sandbox-controller.ts (standalone HTTP server for the MCP Apps sandbox)
- web-server-config.ts (env parsing + initial-config payload + banner;
`autoOpen` defaults off under VITEST so test runs don't shell out to `open`)
- server.ts (standalone Hono prod server for the future v2 launcher, #1246)
- start-vite-dev-server.ts (in-process Vite starter for the future launcher)
- vite-base-config.ts (shared optimizeDeps exclusions)
Wires `honoMiddlewarePlugin(buildWebServerConfigFromEnv())` into
`vite.config.ts` with `apply: 'serve'`. Adds the `open` dependency and a
DOM lib + `@inspector/core/*` path alias to `tsconfig.node.json` so the
dev-backend files type-check alongside vite.config.ts.
Coverage: web-server-config.ts (100% lines), sandbox-controller.ts (91% lines),
and vite-base-config.ts (100%) all clear the per-file gate. The Vite plugin,
prod server, and dev-server starter are excluded from coverage as runtime
glue exercised by `npm run dev` end-to-end (callers covered separately;
their logic lives in core/mcp/remote/node, which integration tests already
exercise).
Closes#1320.
Unblocks #1244 (Wire App.tsx) — its test plan can now run end-to-end.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* fix(web/server): address PR review feedback on the dev-backend port
- sandbox-controller: resolve start() with empty values on listen error
(e.g. EADDRINUSE on a fixed MCP_SANDBOX_PORT) instead of leaving the
promise pending forever. Without this, the Vite plugin's
`await sandboxController.start()` could hang the entire dev backend on a
port collision. Banner now silently omits the sandbox line; getUrl()
keeps returning null. Adds a regression test exercising the EADDRINUSE
path against a real socket.
- vite-hono-plugin: listen for `error` and `close` on the incoming request
stream (in addition to `end`) so an aborted POST/PUT (browser navigates
mid-upload) doesn't leak the middleware indefinitely.
- vite-hono-plugin: add a `.catch()` to the initial `pump()` kickoff so a
sync throw before the first `await reader.read()` can't surface as an
unhandled rejection.
- sandbox_proxy.html: drop the stale CSP comment — v1.5's sandbox HTTP
server never set CSP either; this PR doesn't regress anything. Replace
with the actual isolation model (iframe sandbox attribute + origin
allowlist) so future readers don't assume a CSP header is enforced.
- Hoist `WebServerHandle` to a shared `server/types.ts` so the future
launcher port (#1246) doesn't need to pick one of two duplicate
declarations.
- Extract `resolveAutoOpen()` helper out of the triple-nested ternary in
`buildWebServerConfigFromEnv` for legibility, with the three-way logic
documented in one place.
- Add an inline comment explaining why
`webServerConfigToInitialPayload` falls back to streamable-http for
unknown discriminators (forward-compat with future SDK transports)
rather than throwing.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
cliffhall