| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
cliffhall
|
55db703196 |
feat: add --protocol-era launch flag for ad-hoc servers (#2208)
An ad-hoc --server-url / command launch always negotiated the legacy era, because protocolEra was only settable per server in mcp.json. A wrapper that mints a short-lived bearer token therefore had to write that token to disk to exercise a server under auto or modern. --protocol-era <legacy|auto|modern> now feeds settings.protocolEra in all three clients through a shared parseProtocolEra coercer: - CLI/TUI overlay it in loadServerEntries alongside --header, onto an ad-hoc target and onto a --catalog/--config entry for that run. - Web stamps it on the in-memory ad-hoc entry, which the backend lifts into settings like headers; as with --header it is rejected alongside --catalog/--config, but unlike --header it applies to stdio too. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SZ4rrvH6xaCfrst75gJh7x Signed-off-by: cliffhall <cliff@futurescale.com> |
||
|
cliffhall
|
e641edeeab |
feat: bound connect attempts with a 30 s default connectionTimeout (#2320)
connectionTimeout defaulted to 0, which InspectorClient.connect() read as "no bound at all" — so out of the box nothing the Inspector owns bounded a connect attempt, and the only thing ending a hung handshake was the SDK's 60 s per-request timeout on initialize, reporting "Request timed out". - Add DEFAULT_CONNECTION_TIMEOUT_MS (30000) to core/mcp/types.ts. An absent value resolves to it on the client, on disk read, in the web form draft, and in the CLI's header-only settings shell. An explicit 0 keeps its documented meaning (no timeout; --connect-timeout 0) and is now persisted so the opt-out round-trips; the default is the omit-sentinel, as for taskTtl. - Key the post-timeout transport teardown to the timer actually firing, not to connectionTimeout > 0 — otherwise a non-zero default would tear down every failed connect, including a recoverable 401 whose transport the auth recovery holds open. - The timeout message names the bound and where to raise it: "Connection timed out after N ms. To accommodate a slower server, you may increase the timeout value in Server Settings." - The CLI's UNREACHABLE classifier now matches that message. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01M4h8Xa6Ed9zwtv5ojX35MT Signed-off-by: cliffhall <cliff@futurescale.com> |
||
|
cliffhall
|
b33532c024 |
feat: allow complex JSON values in request _meta
Closes #1910 `_meta` was typed `Record<string, string>` end to end in the Inspector — on disk as a `{ key, value }[]` pair array, in the Server Settings form as key/value rows, and in every request verb's per-call metadata parameter. Nothing in the MCP spec restricts a `_meta` value to a string, and the SDK models the field as a `z.looseObject`, so the restriction was ours alone. Widen the whole path to `RequestMetadata` (`Record<string, JsonValue>`): - Per-server default metadata is a JSON **object** on disk and in memory. The pre-#1910 pair array is still read (`normalizeStoredMetadata`) so an existing `mcp.json` keeps working; it is never written back, so a save migrates the entry. - The Server Settings → Request Metadata section is a JSON editor (`JsonObjectInput`) instead of key/value rows — rows cannot express an object value. It keeps the typed text as the display source and emits only parsed JSON, the same draft split `SchemaJsonField` uses, so the box stays typeable; invalid text is flagged inline and not applied. - The CLI stops flattening `--metadata` / `--tool-metadata` through `metaValueToString`. Those values were already JSON-parsed, so `trace={"id":"abc"}` used to reach the wire as the *string* `{"id":"abc"}` and now reaches it as an object. - `servers/show` redaction replaces a sensitive key's whole value rather than a string, so a structured value cannot leak through its members. - `progressTokenOf` narrows the reserved `progressToken` key back to `string | number` before it reaches the SDK; any other JSON still travels inside `_meta` but wires up no progress callback. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_0177mPHAdECD18nLLCTwR5rh Signed-off-by: cliffhall <cliff@futurescale.com> |
||
|
cliffhall
|
bc408f5869 |
feat(auth): file-backed and in-memory SecretStore for hosts with no keychain
Closes #1950 Before this, a box with no reachable OS keychain — the published container (no D-Bus session, #1848), Android/Termux (no platform binary, #1905), a minimal Linux install without libsecret — could not persist an OAuth client secret or a stdio `env:` value at all. `KeyringSecretStore` degraded into a store that silently holds nothing: `get` returned null, `delete` no-opped, and `set` hard-failed with a 503. That is the correct failure behavior, but it left the documented, supported way to run the Inspector with no secret persistence whatsoever. Adds the two missing implementations and, more importantly, the policy that picks one and the surfaces that say which was picked. - `FileSecretStore` — one `0600` JSON document at `~/.mcp-inspector/secrets.json`, encrypted with AES-256-GCM whenever `MCP_INSPECTOR_SECRET_KEY` is set (scrypt, per-file random salt). The whole map is encrypted as a unit rather than value-by-value so the account names — `${serverId}:${field}` — are hidden too; a per-value scheme would leave a readable index of which servers you hold a client secret for. A file that can no longer be decrypted reads as empty (matching the interface's read tolerance) but *refuses to be written*, because replacing a file of still-valid secrets to satisfy an additive request destroys data. - `secret-store-selection.ts` — the policy. `MCP_INSPECTOR_SECRET_STORE=keyring|file|memory` wins outright; otherwise probe the keychain and, if unreachable, fall back loudly. The fallback is `memory` in a container whose secrets directory is not on a mount, and `file` otherwise — so mounting the volume the README already recommends for the catalog flips the same run to durable storage with no configuration, and an unmounted container gets the honest answer rather than a file `--rm` will discard. Cached per process so the banner, `/api/config`, and the store doing the writing cannot disagree. - Automatic, but never silent. The downgrade prints at startup, rides `GET /api/config`, and is named in a permanent 32px footer at the bottom of both dialogs that accept a secret. A startup banner is seen once by whoever started the process; a toast is seen once; a dismissible banner is the thing a user dismisses before doing the work it describes. The plaintext and memory cases render their caveat inline in a warning tone — a warning you must hover to discover is not one. - `SecretStoreUnavailableError` is now the base every store's `set` throws, so the routes translate one condition into a 503 instead of matching `KeychainUnavailableError` by name. Docs: the container section of the root README gains a table of which store you get and how to make secrets survive, plus the `MCP_INSPECTOR_SECRET_KEY` upgrade/mismatch rules. Tests: the existing interface contract block is extracted to `secretStoreContract.ts` and run against all three implementations, so none can drift on the availability contract. `FileSecretStore` is tested against a real temp filesystem — mode, cross-instance round-trip, that the ciphertext does not contain the plaintext, the read-modify-write race, and every refusal path. Full `npm run ci` passes, per-file gate included. Signed-off-by: cliffhall <cliff@futurescale.com> |
||
|
Cliff Hall
|
b3b04c6939 |
Thread cacheMode through managed list refresh via SDK cache-aware verbs (#1721) (#1723)
Some checks failed
Run install, format, lint, build, and test on every push / build (push) Has been cancelled
Run install, format, lint, build, and test on every push / publish (push) Has been cancelled
Run install, format, lint, build, and test on every push / publish-github-container-registry (push) Has been cancelled
* Thread cacheMode through managed list refresh via SDK cache-aware verbs (#1721) Manual/auto refresh of tools/resources/prompts now forces a cache-bypassing round trip on modern servers, delivering the raw-request cacheMode control deferred from #1628. The InspectorClient list/read path uses the SDK's single-page `client.request` verbs (for pagination debugging), which never consult the SDK response cache — so `cacheMode` was inert there. This adds a separate aggregate path that routes through the SDK's cache-aware high-level verbs, where `cacheMode` is honored: - InspectorClient: new `listAllTools/Prompts/Resources/ResourceTemplates( { cacheMode, metadata })` that call `client.listTools()` etc. (all-page aggregate + SEP-2243 x-mcp-header exclusion + cache consult/write). A shared `getCacheableRequestOptions` / `aggregateListParams` back all four. - InspectorClientProtocol: the four `listAll*` methods added. - ManagedListState: delegates page walking to the SDK verb (config `fetchPage` loop → `fetchAll`); `refresh(metadata?, cacheMode?)` threads cacheMode. A `list_changed` auto-refresh bypasses the cache (`cacheMode: "refresh"`). - Managed hooks: user-initiated `refresh()` passes `cacheMode: "refresh"`, so the existing per-tab Refresh buttons become genuinely cache-bypassing — no App wiring change. Connect-time load stays default (`'use'`). The single-page `listTools(cursor)` primitive is unchanged; the paged hooks still surface per-page `nextCursor`. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01XNdjEPKLG637X8YmhDiEk5 * Single-page list pagination: sidebar toggle + server setting (#1721) Delivers the deferred single-page fetch UI: Tools/Resources/Prompts can be loaded one page at a time instead of auto-aggregating every page — a defensive option for servers with very large lists. - New `singlePageLists` server setting (persisted, server-wide), plumbed through ServerConfig/InspectorServerSettings, serverList convert/default, the node + remote settings paths, and the Server Settings form ("Fetch Lists One Page at a Time"). - New `ListPaginationControls` element (a "Single page" switch + "Load next page" button + "N pages loaded" status) rendered in each list sidebar; the toggle edits the setting live (optimistic) and persists it. - The paged state stores (PagedTools/Prompts/ResourcesState) now own loading: they auto-load page 1 on connect in single-page mode and track nextCursor + page count as observable state; the managed stores skip their all-page walk in single-page mode (so nothing is over-fetched) while still lighting the list-changed indicator. `usePaginatedList` selects the display source and pagination controls per mode — pure, no data-loading in React effects. - Refresh is mode-aware: reload page 1 in single-page mode, refetch the whole aggregate otherwise. Sidebars widened 340→360 so the controls don't crowd list entries. - Test server: `test-servers/configs/pagination-http.json` (12 tools/resources/ prompts, page size 4 → 3 pages each) exercises the flow end to end. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01XNdjEPKLG637X8YmhDiEk5 * Add pr-screenshots proving single-page pagination (#1721) Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01XNdjEPKLG637X8YmhDiEk5 * Address @claude review: template load, double-click guard, auth recovery (#1721) - Fix: resource templates never loaded on connect in single-page mode. The connect-time all-page skip now applies only to lists with a paged counterpart (new `deferInSinglePage` flag on ManagedListConfig; false for resource templates), so templates still aggregate on connect regardless of the setting. - Guard `PagedTools/Prompts/ResourcesState.loadPage` against a concurrent load (fast double-click on "Load next page") so the same page can't be appended twice; the in-flight load owns the cursor and the second call is a no-op. - Thread ambient auth recovery through the single-page refresh, Load-next-page, and mode-switch loads (they previously bypassed it) — usePaginatedList's onRefresh/onLoadMore now return their promises so App can wrap them. - Drop the misleading "aggregated list" wording from the paged-store docs. Tests added for each; npm run coverage green. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01XNdjEPKLG637X8YmhDiEk5 * Review round 2: revert optimistic toggle when persisting the setting fails (#1721) Non-blocking review follow-up. If updateServerSettings rejects, the optimistic `singlePageListsOverride` is now cleared and the live client setting rolled back (the effect only clears the override when the persisted value changes, which doesn't happen on failure), so the UI and client reflect what's on disk rather than the failed edit. Added an App test for the revert path. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01XNdjEPKLG637X8YmhDiEk5 * Fix single-page Refresh not clearing list-changed indicator + UI polish (#1721) Round-3 review fix (blocking): in single-page mode a `list_changed` lights the list-changed indicator, but the single-page Refresh reloads page 1 of the paged store and bypassed `useManaged*.refresh()`, so the indicator was never cleared. Expose `clearListChanged` from useManagedTools/Prompts/Resources and call it in the single-page branch of onRefreshTools/Prompts/Resources. Tests added. UI polish (user feedback on the sidebar control): - Rename the switch label "Single page" → "Paginated". - Put "Load next page" on the same row as the switch, space-between (switch fully left, button fully right). - Move the "N pages loaded" status to its own line below the row, centered. - Hide the whole control once the list is known to be a single page (single-page mode, page 1 loaded, no nextCursor) — nothing to paginate. pr-screenshots refreshed to the new layout. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01XNdjEPKLG637X8YmhDiEk5 * Rename the singlePageLists setting to paginatedLists for clarity (#1721) `singlePageLists` read backwards from the "Paginated" switch label (it sounds like paginated=false). Rename the server setting to `paginatedLists` with the same value meaning — true = paginated/one-page-at-a-time, false = aggregate-all — and follow through on the related identifiers for consistency: - Setting field `paginatedLists` across ServerConfig / InspectorServerSettings, serverList convert/default, node + remote settings paths, and the form/modal callbacks (onPaginatedListsChange). - `usePaginatedList` / `ListPaginationControls` prop `singlePage` → `paginated`, `onSinglePageChange` → `onPaginatedChange`. - `ManagedListConfig.deferInSinglePage` → `deferWhenPaginated`. - App state (paginatedListsOverride, onTogglePaginatedLists, …) and all tests/fixtures + mode-referring comments. "single-page" wording that denotes the SDK's one-page `client.request` verb (inspectorClient) is intentionally left as-is. Purely a rename — no behavior change; unit + integration + cli + tui + coverage all green. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01XNdjEPKLG637X8YmhDiEk5 * Format App.test.tsx (prettier) after the paginatedLists rename (#1721) Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01XNdjEPKLG637X8YmhDiEk5 --------- Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
Bob Dickinson
|
13dafe457b |
Guided-auth removal, OAuth smoke testing, and TUI/CLI support (#1531)
* refactor(web): update OAuth E2E tests to use new authentication method - Replaced `runGuidedAuth` with `authenticate` in the InspectorClient OAuth end-to-end tests to support quick authentication with CIMD pre-registration. - Updated comments to reflect the change in authentication method and its support for HTTP test metadata URLs. - Ensured that the tests continue to validate the expected authorization URL after the change. Additionally, imported `ensureCimdClientRegistration` in the OAuthManager to streamline client registration during the authentication process. * Guided-auth removal, OAuth smoke testing, and TUI/CLI support * Added CLI OAuth runner flags tests * Added clarifying comment on port 0 binding * README notes on TUI oauth callback port, prettier fixes for CLI tests * CIMD validation uses inline like EMA IdP * Fixed TUI test failures from merge * test: bring 5 OAuth files over the 90 per-file coverage gate The guided-auth-removal work added/touched several files that fell below the repo's >=90 per-file coverage gate (npm run coverage). CI doesn't run the gate (it's local-only), so validate + test:integration passed while these gaps slipped through. Bring them all back over the line: - core/auth/node/runner-oauth-callback.ts: test bad-URL/non-http-scheme throws, no-port->80 default, and IPv6 hostname bracketing. Annotate the provably-dead guards (empty host, out-of-range port, String(err) fallback, pathname "/" fallback) -- all rejected by new URL() upstream -- with justified v8 ignore comments instead of lowering the gate. - core/auth/cimd.ts: test the AS-doesn't-support-CIMD early return. - core/react/useClientSettingsDraft.ts: test the functional-updater path, the stale-onChange-after-close prev===null guard, and the timer-fires-after-close value===null guard. - ClientSettingsForm.tsx: test the CIMD checkbox toggle and CIMD URL clear. - clients/tui/src/utils/oauthDisplay.ts: test static/dcr registration kinds, the expired IdP session, and the configured-scope/empty-scope branches of formatScopes. npm run coverage now passes (exit 0) across web, cli, tui, launcher. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Cursor <cursoragent@cursor.com> Co-authored-by: cliffhall <cliff@futurescale.com> Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Cliff Hall
|
5ee347571f |
feat(web,core): persist & edit STDIO cwd/env in Server Settings (#1515) (#1518)
* feat(web,core): edit STDIO cwd/env in Server Settings (#1515) Persist and edit a STDIO server's working directory and environment variables through the Server Settings modal. - Add `env` (pair-array, mirrors headers) and `cwd?` to `InspectorServerSettings`. - `storedFieldsToInspectorSettings` lifts the stdio config's `env`/`cwd` into settings so the modal can show them; they stay on `config` for the transport. Add `envRecordToPairs` / `envPairsToRecord` helpers. - `env`/`cwd` remain config-owned on disk (the standard mcp.json location): the `/api/servers` PUT route writes an edited settings.env/cwd back onto the stored stdio config on a settings-only patch (supporting clear), and a config-providing PUT keeps config authoritative. `validateSettings` accepts `env`/`cwd`. - Server Settings modal: Working Directory field in Options and a dedicated collapsible Environment Variables section — both STDIO-only. - Registry server.json import sets no `cwd` (the schema has no working-directory concept); documented in serverJson.ts. Tests: serverList converter round-trip, route write-through (set/clear, config-precedence, non-stdio no-leak, validation), import preservation (client-config cwd, registry cwd skip), and form/modal component coverage. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * fix(web): preserve config env/cwd when a settings PUT omits them (#1515 review) Address Claude's review of #1518. - `/api/servers` PUT now distinguishes an *absent* `env`/`cwd` (preserve the stored value) from an explicit empty list / blank string (clear). Previously `validateSettings` coerced a missing `env` to `[]`, so an env-unaware caller patching only a timeout would silently wipe the server's env/cwd. The integrated web client always resends the full GET-rehydrated env, so it was unaffected — this protects the raw HTTP contract. - `validateSettings` reports `envProvided`/`cwdProvided`; the write-through only touches `config.env`/`cwd` for fields the caller actually sent. - On the omit path, rehydrate the untouched env's keychain values onto the rebuilt entry so the secret reconcile re-persists them rather than sweeping the blanked-on-disk keys out of the keychain. - Minor: guard the stdio cast in `mcpConfigToServerEntries` on the transport type instead of casting unconditionally. - Test: settings-only PUT omitting env/cwd preserves config keys + cwd + the keychain secret. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Cliff Hall
|
e72d4307f3 |
feat(cli): lift config-file headers/timeouts/OAuth into serverSettings (#1482) (#1500)
* feat(cli): lift config-file headers/timeouts/OAuth into serverSettings (#1482) The CLI resolved file-sourced servers via resolveServerConfigs(), which returns bare MCPServerConfig and dropped disk-level headers, timeouts, and OAuth — CLI connections from a --catalog/--config file silently ignored them. The TUI already lifted these via mcpConfigToServerEntries(). Extract the TUI's catalog/config -> per-server-settings resolution into a shared core module (core/mcp/node/servers.ts: loadServerEntries + selectServerEntry) and route both CLI and TUI through it, so the two share one file->settings path. --header still overrides the file's headers for the run while preserving the file's timeouts/OAuth. - core: add loadServerEntries/selectServerEntry/headersToServerSettings - tui: tui-servers.ts re-exports the shared core helpers (no logic dup) - cli: resolve via loadServerEntries + selectServerEntry; drop the CLI-only conflict check and bare-config path - tests: core servers.test.ts (settings lifting, header merge/override, stdio overrides, seed/error/conflict, selection); CLI integration tests asserting a config header is sent over HTTP and --header overrides it - docs: CLI README note on file settings being applied Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * refactor(core): address #1500 review — dedup overrides, drop dead wrapper, clearer error, spec refresh - Remove the now-unused resolveLaunchServerConfigs() wrapper (both CLI and TUI route through loadServerEntries now); migrate its default-catalog launch tests to compose withDefaultCatalogPath + resolveServerConfigs. - Deduplicate applyStdioOverrides against config.ts applyOverrides: export the latter (now trims cwd) and reuse it in servers.ts. - selectServerEntry's unknown-name error is source-agnostic ("not found" not "not found in config file") since entries may be a single ad-hoc default, where "config file" would mislead. - Refresh specification/ docs (v2_cli_tui_launcher.md, v2_catalog_launch_config.md): CLI/TUI resolution now via loadServerEntries/selectServerEntry; mark gap G1 resolved (#1482); withDefaultConfigPath → withDefaultCatalogPath. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * test(cli): extend smoke:cli to cover #1482 lift→serverSettings Adds end-to-end smoke coverage for the config-file headers/timeouts/OAuth lift introduced in #1482: - unknown --server now errors source-agnostically ("not found") - multi-server catalog selection via --server (and the omit-it error) - --header merge does not break the stdio connect path - HTTP transport: a config-file `headers` object is lifted onto the wire, and a CLI --header overrides it (verified against an in-process test server's recorded requests via a non-blocking spawn) Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
| Author | SHA1 | Date | |
|---|---|---|---|
|
|
55db703196 | ||
|
|
e641edeeab | ||
|
|
b33532c024 | ||
|
|
bc408f5869 | ||
|
|
b3b04c6939 |
||
|
|
13dafe457b |
||
|
|
5ee347571f |
||
|
|
e72d4307f3 |