Addresses Copilot's round-4 review on #2035 — again reported as "no new
comments" while carrying three suppressed ones. All three reproduced.
1. The TUI form still named its fields from the SDK. `uriTemplateToForm`
read `UriTemplate.variableNames`, which mangles a name: `{;id}` yields
";id" and `{id:3}` yields "id:3". The form therefore submitted
`{ ";id": "7" }` while the shared expander looked up `id`, found
nothing, and dropped the expression — the value vanished silently.
This is the finding that mattered most, because it falsified the claim
this change is built on. Moving the expander into core only makes the
clients agree if each client's FORM derives its names from the same
parser: a form submits under the names it rendered. The TUI now reads
`templateVariables`, and the SDK template is constructed only to
validate, preserving the existing malformed-template diagnostic.
Its `required` flag comes from `requiredGroups`, and only a variable
that is the sole member of a non-omittable expression is marked: ink-
form cannot express "any one of these", so marking every member of
`{a,b}` required would refuse input the expander accepts.
2. `encodeURIComponent` is not RFC 3986's unreserved set — it leaves the
sub-delims !'()* bare, which RFC 6570 requires encoded for every
operator except + and #.
Fixing that settled a design question left open in the previous round.
With two encoders, the SAME value encoded differently depending on
whether its expression happened to carry a modifier, since only the
modifier pushed it onto our path. So delegation is gone entirely: one
expander, one set of rules. The SDK's `UriTemplate` is still
constructed, but only to validate a template.
3. The "Any one of: a, b" hint could contradict the disabled submit
button. A name can sit in a singleton required group AND a shared one
(`x://{a}/{a,b}`), where the singleton demands that exact field. The
hint is suppressed in that case.
Signed-off-by: cliffhall <cliff@futurescale.com>
Closes#2007.
Two things, both surfaced while answering "does #1928's PR also fix #2007?".
**#2007, and why it belongs in this PR.** `z.array(z.union([z.object(…),
z.object(…)]))` gives an `items.anyOf` whose branches carry no top-level
`const`, so every MultiSelect option was `String(item.const ?? "")` — the
empty string, twice. Mantine *throws* on duplicate option values, greying
out the whole tool panel.
That is a pre-existing bug, but this branch makes it reachable from a new
direction: a *nullable* array of object unions previously had no top-level
`type` and fell to the JSON fallback, and now collapses to `type: "array"`
with `items.anyOf` — straight into the crash. Shipping the collapse without
this fix would widen an existing crash, so the two go together. Both shapes
are covered by tests.
`toConstOptions` now returns `null` unless every branch yields a distinct,
non-empty value, and the field falls through to the JSON editor — which is
the honest widget for a union of object shapes anyway. Applied to the
`string`/`oneOf` path as well, which had the identical `?? ""` and the same
duplicate-throw waiting on it.
**Copilot round 2.** Round 1's fix kept "an explicit `type` is
authoritative", so `{ type: "number", enum: [1, 2] }` still collapses with
its enum hoisted. The TUI's dispatcher tests `property.enum` *before* the
type switch, and `toSelectOptions` stringifies, so that reached a select
that submits `"1"` for `1`. The select path is now gated on `isStringEnum`
(exported from core for this), and a typed non-string enum falls through to
its typed field: the enum constraint is lost, the value's type is not,
which is the safer of the two losses. Pre-existing for a plain numeric
enum; the collapse just made the nullable form reachable too.
Signed-off-by: cliffhall <cliff@futurescale.com>
Closes#2015, folded into #1928 rather than left as a follow-up.
The TUI's `schemaToForm` has the same defect the web `SchemaForm` had: its
local `JsonSchemaProperty` declares only `type?: string` — no `anyOf`, no
array-valued `type` — so a `.nullish()` argument has no top-level `type` or
`enum` for the dispatcher to read and falls to the `switch` default, losing
its select. Milder than the web bug (a plain text field, not a corrupting
JSON textarea), but the same class.
Fixing it in a second place is the argument for not having the logic in a
first place. So the collapse moves to `core/json/nullableUnion.ts` as
`normalizeNullableUnion`, generic over a minimal `NullableUnionSchema`
shape — the least a caller must expose to be *recognized* as a nullable
union — so neither client has to adopt the other's schema type. Both form
builders now share one copy and cannot drift on which schemas they render.
- `core/json/nullableUnion.ts` — the shared collapse, plus tests at
`clients/web/src/test/core/nullableUnion.test.ts` (the web suite is what
gates `core/`).
- `clients/web`: `schemaUtils.normalizeUnionType` is gone; `SchemaForm` and
`resolveRefsInMessage` call the core function directly.
- `clients/tui`: `schemaToForm` normalizes each property before dispatch,
and `JsonSchemaProperty` grows the `anyOf` / array-`type` fields the
encoding uses.
Verified by driving the built TUI under a pty against the
`nullable-fields-http.json` showcase server. Before, every argument of
`record_shipment` rendered as a plain text field; after, `direction` is a
select ("No value"), `quantity` an integer, `express` a boolean
("[Not set]").
Signed-off-by: cliffhall <cliff@futurescale.com>
* tui: detect array-of-enum on items.enum alone (#1751)
The TUI schemaToForm array-of-enum branch was nested under an outer
`if (property.enum)` guard, so a standard array-of-enums schema —
`{ type: "array", items: { enum: [...] } }` with no top-level `enum` — never
reached it and fell through to a plain string input. The web SchemaForm already
guards on `items?.enum` alone; this aligns the TUI with it.
Restructure the enum handling so the array-of-enums case keys on
`property.type === "array" && property.items?.enum` independently of a top-level
`enum`, falling back to the single-select `property.enum` branch otherwise. The
enumNames labeling from #1691 applies unchanged.
Tests: the array-of-enum cases now use the standard `items.enum`-only shape
(dropping the redundant top-level `enum` the old nesting required), plus a case
asserting a redundant top-level `enum` still works.
Closes#1751
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XNdjEPKLG637X8YmhDiEk5
* docs(pr-screenshots): TUI array-of-enum before/after proof shots (#1751)
Before/after of the TUI tool form for an array-of-enums field with no top-level
`enum`: before the fix it renders as a plain text field (raw "m"); with the fix
it renders as a select resolving the enumNames title ("Medium").
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XNdjEPKLG637X8YmhDiEk5
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* web+tui: honor enumNames in enum forms (#1691)
Legacy titled enums (`enum` + non-standard `enumNames`) rendered their raw
wire values instead of the human-readable titles in both the web SchemaForm
and the TUI schemaToForm builder, so a user picking "pet-1" had no idea it
meant "Cats".
Web (SchemaForm.tsx): extract a `toEnumData` helper that zips `enum` with
`enumNames` into `{ value, label }[]` when the lengths match, falling back to
bare values otherwise. Use it in both the string-enum and array multi-select
branches (the latter previously inlined the same zip).
TUI (schemaToForm.ts): add `enumNames` / `items.enumNames` to the property
interface and a `toSelectOptions` helper used by the single-select and
array-of-enum branches, labeling by `enumNames[i]` when length-matched and
falling back to `String(val)`.
Both guard on the arrays being the same length: a wrong-length zip would
mislabel options, which is worse than showing raw values. Raw values are
always submitted; only the display label changes.
Closes#1691
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XNdjEPKLG637X8YmhDiEk5
* docs(pr-screenshots): TUI enumNames before/after proof shots (#1691)
Before/after captures of the TUI tool-test form (schemaToForm -> ink-form)
against a legacy titled enum: with the fix the field resolves pet-1 -> "Cats";
before, it showed the raw "pet-1".
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01XNdjEPKLG637X8YmhDiEk5
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Migrate all three clients + core + test-servers from
@modelcontextprotocol/sdk@1.29 to SDK v2 (2.0.0-beta.4), keeping behavior
identical against legacy (2025-11-25) servers. Foundation for the SDK V2 +
New Spec stack.
Packages
- Split @modelcontextprotocol/sdk -> @modelcontextprotocol/client (Client,
transports, OAuth, error taxonomy, protocol types) + core (Zod schemas);
stdio -> client/stdio, Ajv -> client/validators/ajv. Test-servers ->
@modelcontextprotocol/server (+ server-legacy/sse). Deterministic import
rewrite (schemas -> core, everything else -> client); the codemod misroutes
client code to /server so it was not used for path routing.
- new Client(..., { versionNegotiation: { mode: 'legacy' } }) — nothing
2026-era goes on the wire.
Runtime (core/mcp/inspectorClient.ts)
- Error taxonomy: McpError -> ProtocolError, ErrorCode -> ProtocolErrorCode;
RequestTimeout -> SdkError/SdkErrorCode.
- Handlers take method strings; task methods (tasks/*, notifications/tasks/*)
use the 3-arg custom form (excluded from v2's spec-method set).
- Legacy tasks kept working (per project requirement): requestor tasks re-
implemented over raw client.request + explicit deprecated schemas;
experimental.tasks.callToolStream replaced by a local pollTaskToolCall
async generator (with _progressHandlers revival so task-execution progress
still reaches the caller). Receiver (server-initiated) tasks: the v2 Client
validates a sampling/elicit handler result and rejects the legacy { task }
response with -32602 — installReceiverTaskResponseBypass swaps the wrapped
entry in the private _requestHandlers map for the task-augmented branch so
{ task } reaches the wire (fixes server-initiated sampling-via-task).
- Pagination: list verbs use raw client.request({method}, List*ResultSchema)
for single-page behavior (v2's client.listX() auto-aggregate all pages).
Web / auth / apps
- Rename local JsonSchemaType -> InspectorFormSchema + add toFormSchema()
structural narrowing at the SDK-schema -> form boundary.
- ext-apps still peers on SDK v1: one compat boundary with documented casts
(remove when ext-apps#702 lands a v2 peer).
- OAuth provider saveClientInformation reconciled with v2's
OAuthClientInformationContext; InvalidClientMetadataError re-homed as a
local class (server-legacy/auth is not browser-safe).
- vitest.shared.mts dedupes @modelcontextprotocol/client+core to one copy so
vi.mock intercepts the SUT's import.
Accepted v2 behavior changes (per #1624 / spec §9.2): unknown-tool call
rejects with -32602; cancellation is stream-abort (no guaranteed
notifications/cancelled frame); output-schema strictness restored via the
Inspector's own Ajv check on the default path.
npm run ci green: validate (web 3087 / cli 212 / tui 274 / launcher 5),
coverage (>=90 per-file, all clients), smoke (launcher/cli/web), storybook
(410).
Closes#1624
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* refactor(web): update OAuth E2E tests to use new authentication method
- Replaced `runGuidedAuth` with `authenticate` in the InspectorClient OAuth end-to-end tests to support quick authentication with CIMD pre-registration.
- Updated comments to reflect the change in authentication method and its support for HTTP test metadata URLs.
- Ensured that the tests continue to validate the expected authorization URL after the change.
Additionally, imported `ensureCimdClientRegistration` in the OAuthManager to streamline client registration during the authentication process.
* Guided-auth removal, OAuth smoke testing, and TUI/CLI support
* Added CLI OAuth runner flags tests
* Added clarifying comment on port 0 binding
* README notes on TUI oauth callback port, prettier fixes for CLI tests
* CIMD validation uses inline like EMA IdP
* Fixed TUI test failures from merge
* test: bring 5 OAuth files over the 90 per-file coverage gate
The guided-auth-removal work added/touched several files that fell below
the repo's >=90 per-file coverage gate (npm run coverage). CI doesn't run
the gate (it's local-only), so validate + test:integration passed while
these gaps slipped through. Bring them all back over the line:
- core/auth/node/runner-oauth-callback.ts: test bad-URL/non-http-scheme
throws, no-port->80 default, and IPv6 hostname bracketing. Annotate the
provably-dead guards (empty host, out-of-range port, String(err)
fallback, pathname "/" fallback) -- all rejected by new URL() upstream --
with justified v8 ignore comments instead of lowering the gate.
- core/auth/cimd.ts: test the AS-doesn't-support-CIMD early return.
- core/react/useClientSettingsDraft.ts: test the functional-updater path,
the stale-onChange-after-close prev===null guard, and the
timer-fires-after-close value===null guard.
- ClientSettingsForm.tsx: test the CIMD checkbox toggle and CIMD URL clear.
- clients/tui/src/utils/oauthDisplay.ts: test static/dcr registration
kinds, the expired IdP session, and the configured-scope/empty-scope
branches of formatScopes.
npm run coverage now passes (exit 0) across web, cli, tui, launcher.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: cliffhall <cliff@futurescale.com>
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* test(web): audit branch-coverage outliers, raise per-file gate to 70 (#1271)
The web per-file coverage gate had drifted red: the recently-landed EMA
auth feature (core/auth/ema/*) and ClientSettings components shipped
undertested, and the prior 50% branch floor let business-logic branches
go untested. CI does not run the coverage gate, so this accumulated.
Add tests to bring every failing file above the gate and push branch
coverage well past 70 across the board, then raise the per-file branches
threshold 50 -> 70 in clients/web/vite.config.ts.
- EMA core (emaFlow, resourceContext, jwt, wire): 50-88% -> 86-100% branch
- EMA OIDC/transport (idpOidc, tokenEndpoint, transportProvider): -> 97-100%
- oauthManager / discovery: 73-83% -> 88-92%
- ClientSettingsModal/Form, ConnectionInfoContent: 0-88% -> 96-100%
- useClientSettingsDraft / useEmaIdpLoginState hooks: 20% -> 100%
- TaskStatusBadge / SortableServerCard outliers: 50% -> 100%
Coverable branches reached by mocking useComputedColorScheme (dark theme),
dnd-kit useSortable (isDragging), and fetch/OIDC paths. Remaining sub-100
branches are genuinely-unreachable defensive guards or happy-dom-inherent
(portal / useMediaQuery / typeof window) and documented in test comments.
No source files changed. Global web branch coverage 88.73% -> 90.63%.
AGENTS.md updated; cli/tui/launcher stay at 50 (out of scope).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* test: raise per-file coverage gate to 90/90/90/90 across all clients
Follows the #1271 web branch-coverage audit (50 -> 70) by raising the
whole per-file gate to >=90 on all four dimensions — lines, statements,
functions, branches — for web, cli, tui, and launcher (core/ is measured
under the web suite). A codebase-wide audit added real tests for every
outlier and brought global coverage up across the board.
Config: all four vitest/vite coverage configs set to 90/90/90/90.
Two pure-type modules (core/mcp/import/types.ts, clients/web/server/
types.ts) added to the web coverage exclude list, matching the existing
type-only exclusions.
Tests: ~50 test files extended/created across core (auth, ema, mcp,
remote, state, storage, react), web components/screens/server, and the
cli/tui clients. Highlights: full EMA OAuth flow + transport coverage,
inspectorClient/remote server backfill, every Mantine control's handler
branches, and the cli unsupported-method / argv-fallback paths.
Genuinely-unreachable branches are annotated at the source with justified
`/* v8 ignore -- <reason> */` comments rather than lowering the gate:
happy-dom-inherent paths (Mantine portal, useMediaQuery, typeof window
SSR guards), React StrictMode effect replay, and provably-dead defensive
guards (?? fallbacks the types make impossible, Select.onChange values
outside the allowed list). No runtime logic changed; the only structural
edits are two behavior-preserving refactors (ResourceTemplatePanel hoists
the field value to a local so the ignore applies in JSX; ToolsScreen
swaps a ternary for an if) and prettier line-wrapping.
Also fixed a flaky real-timer debounce assertion in PromptArgumentsForm
(asserted an exact sibling-typing interleaving that raced the 300ms
debounce; now asserts the load-bearing fact — a non-empty fire-time
sibling capture).
AGENTS.md updated to describe the uniform 90 gate and the v8-ignore
policy. All four client coverage gates, root validate, storybook (370),
and smoke pass.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* test(web): make connect-crash SSE reader stop on the terminal event
`readSseEvents` looped until the server closed the stream (`done`). The
server closes the events stream immediately after writing the terminal
`transport_error`, but under the heavy parallel scheduler pressure of a
full `coverage` run (v8 instrumentation across all workers) that close
can lag far enough behind the event to trip the 30s test timeout — a
hang, not a wrong result. This made the test intermittently fail under
`npm run coverage` (it passed in isolation and under CI's lighter
`test:integration`).
Stop reading as soon as the terminal `transport_error` event arrives
(cancelling the reader) instead of waiting only for `done`. That event is
always the last one the session queue emits, so nothing is lost, and the
test no longer depends on stream-close timing. The `done` break is kept
for any stream that closes first.
Verified green across two consecutive full `npm run test:coverage` runs
(3094 tests) where it previously hung, plus isolation (~0.5s).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Ports the CLI, TUI, and launcher from v1.5 into v2 behind a single
`mcp-inspector` entrypoint (launcher → web/cli/tui). Includes the
`mcp-inspector --web --dev` launcher fix (Vite alias resolution + prod-server
double-start), the root `postinstall` install cascade with simplified CI, and
spec/AGENTS docs (no-workspaces rationale, Development setup).
Closes#1246.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
