- The holder-record removal is best-effort and can no longer throw past
release(); ERELEASED on release is the library having already dropped a
taken-over lock, so it is ignored rather than described as a lock that
"goes stale on its own".
- The signal test's stand-in now spawns a descendant of its own, so the
whole-process-group guarantee is what the test asserts: a regression to
child.kill() or a non-detached spawn leaves the descendant alive and fails.
- The three docs no longer claim a dead holder is always recovered in 30s:
a stale lock directory that cannot be removed runs the wait to its
45-minute cap and names the path.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsmUAZ6aLUAFqenjJKSSRp
Signed-off-by: cliffhall <cliff@futurescale.com>
`npm run local:gate` now runs its stages under `scripts/gate-lease.mjs`, a
`proper-lockfile` lease under `os.tmpdir()` (or `$XDG_RUNTIME_DIR`), so a gate
started in a second worktree waits for the first instead of overlapping it.
Measured on v2/main @ aa56551b: a quiet gate is 257s green; two started
together had one fail at 279s (`smoke:web:chromium` found port 6298 held by
the other gate's smoke) and the survivor take 338s. Under the lease, three
gates started within seconds ran back to back (259s, then 262s, then the
third), each green with zero timeouts.
The lease grants rather than polls a threshold, so two waiters cannot
deadlock on each other; a holder that dies stops refreshing and is taken over
after 30s; a signal to the wrapper stops the whole process group, releases,
and exits 128+signal; the wait names the holder's pid and worktree and gives
up after 45 minutes. `INSPECTOR_SKIP_GATE_LEASE=1` bypasses it. A lock that
cannot be created runs the gate unleased with a warning.
`scriptChainRuns` looks through the wrapper (and only it) so the existing
vouches about what `local:gate` runs keep reading the real chain.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsmUAZ6aLUAFqenjJKSSRp
Signed-off-by: cliffhall <cliff@futurescale.com>
- Reword the CI guarantee in AGENTS.md, docs/quality-gate.md and the
pre-push-gate skill: a green gate means every check CI applies has
passed here — the strongest predictor of green CI, not a proof — and
name the residual (a test that passes only when slowed) as #1596's
class to fix rather than headroom to keep.
- docs/quality-gate.md: cli's validate DID build, through `test`'s
`pretest` hook; say that the build goes with the dropped `test` leg and
`coverage:cli` builds once, later — in both places.
- Update the two source comments that still described `local:gate` as
running `validate` (verify-skills.mjs, verify-build-gate.mjs).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsmUAZ6aLUAFqenjJKSSRp
Signed-off-by: cliffhall <cliff@futurescale.com>
`local:gate` ran every client's unit suite bare inside `validate` and
again instrumented inside `coverage` — ~80s of a ~370s run re-executing
exactly the files the coverage pass runs a few minutes later. CI pays
nothing for that duplication because its two jobs run in parallel; the
gate runs serially, so it paid all of it.
The gate's first stage is now `local:validate`: the same `validate:guards`
and `validate:core`, then each client's new `check` script (`format:check`
+ `lint` + `typecheck` + `build`) instead of its `validate`, which is now
literally `check && test`. `npm run validate` and both CI jobs are
unchanged; `local:validate` sits in the `local:` namespace so the
workflow guard keeps it out of CI by construction.
The "strict superset" claim in AGENTS.md is reworded to what is now
true — every CI *check*, not every CI *invocation* — with the reasoning:
`@vitest/coverage-v8` reads V8's precise-coverage profiler and rewrites
no source, so the instrumented pass runs byte-identical code and is only
slower, the stricter direction for the failure class this repo sees.
Measured on the same worktree: 370s -> 262s wall (EXIT=0 both), the
four removed legs summing to 78.5s in the baseline run's own profile.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsmUAZ6aLUAFqenjJKSSRp
Signed-off-by: cliffhall <cliff@futurescale.com>
Round 8 of the review asked for an AST. That was the right diagnosis of the
wrong problem: the question was never which parser to use, it was why a
test-timeout guard was parsing JavaScript at all.
It got there one reasonable step at a time. The guard enforces two rules no
Vitest config can report — a per-test `retry`, and Testing Library's
`asyncUtilTimeout` — so it read them out of source text, and the review found a
new valid spelling it missed in five consecutive rounds: a trailing comment,
nested parens in `it.each([makeCase()])`, a member-access prefix, the shorthand
`{ retry }`, an aliased import, a non-literal title. Each fix was correct and
each made it more parser-shaped, until it carried eight helpers doing quote
tracking and bracket balancing.
Both rules are observable at runtime, exactly:
- `vitest.setup.shared.mts` is loaded by all six projects and reads
`ctx.task.retry` — the value Vitest resolved for the test. That covers
strictly more than the scan did: a per-test option, a `describe` option
inherited by children, a project-level setting, and a `--retry` flag typed at
a command line, which the scan could never see since it only read npm scripts.
- `clients/web/src/test/asyncUtilTimeout.test.ts` asserts
`getConfig().asyncUtilTimeout`, the value this project's own waitFors read.
Neither has a spelling to anticipate, so neither can be outrun by a new one.
Both were observed firing before being trusted.
The guard keeps only what it can answer by asking Vitest: resolved budgets,
project-level retry, config discovery, and that each project still loads the
setup file — the one thing about the runtime assertion a config CAN report.
868 lines to 361, every scanner helper gone, and 33 of 48 unit tests deleted
because they pinned edge cases of a thing that no longer exists.
storybookSetup.ts goes with it. At the library's own value its configure() call
was a no-op, and the assertion is what pins the number.
AGENTS.md gains the general rule: a rule about what the code DOES is asserted at
runtime, not read out of the source — reach for a verify:* guard when the
question is about configuration, which a tool can be asked to resolve.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsmUAZ6aLUAFqenjJKSSRp
Signed-off-by: cliffhall <cliff@futurescale.com>
Three of the six Vitest projects ran on Vitest's own testTimeout: 5000 and
five on its hookTimeout/teardownTimeout: 10000, and all 788 Testing Library
waits in the web unit project ran on asyncUtilTimeout: 1000. None of those
numbers was chosen here, and all of them were sized for an idle machine rather
than for three or four concurrent worktree sessions each running a full
local:gate on eight cores. #2292, #2278, #2250, #1942 and #1742 were each that
class, diagnosed one site at a time.
This is the complement of #1596, not a retreat from it: every fix that issue
produced stands, and no race is hidden here. What changes is that a correct,
deterministic test is no longer cut off by a budget nobody picked.
- vitest.shared.mts exports frozen TIMEOUTS / INTEGRATION_TIMEOUTS; all six
projects spread one of them, clients/launcher importing the shared module for
the first time to do so.
- Both web projects configure Testing Library's asyncUtilTimeout. The storybook
one needs its own setup file, deliberately outside .storybook/ and free of
setProjectAnnotations so the automatic preview-annotation provisioning
(#1898) is untouched.
- 28 per-suite restatements of the integration project's own budget are gone,
so raising the shared value now moves every site under it. The handful that
genuinely differ — cross-process lock contention, a full OAuth round trip —
keep their budget as a named constant that says why.
- AppRenderer's waitFor no longer asks for exactly its enclosing budget, which
it could never win (#2292's shape); cli's e2e child timer drops below the
project budget so the bound carrying the diagnostic is the one that fires.
- The transition auto-settle's slack term is named RAF_SLACK_MS and raised;
the term derived from HEADER_ANIM_MS is untouched. The two answer to
different things and must not be scaled as one number.
- The 19 Playwright budgets scattered across three web smokes become four
named constants in scripts/lib/browser-timeouts.mjs.
scripts/verify-test-timeouts.mjs resolves each project through Vitest itself
and asserts the budgets, the asyncUtilTimeout sites, and that retry stays
unset. It was observed red against the pre-change config: unit/tui/launcher at
testTimeout 5000, five projects at hookTimeout 10000, both asyncUtilTimeout
sites unmet.
Closes#2323
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsmUAZ6aLUAFqenjJKSSRp
Signed-off-by: cliffhall <cliff@futurescale.com>
Agents routinely spend turns tight-polling for a condition that was already
going to notify them — ~80 consecutive no-op turns waiting out one local:gate
run on #2250, with a completion notifier for that very process already armed.
The convention existed only in a per-user memory note, which is invisible to
anyone else and cannot be relied on mid-session.
- AGENTS.md gains a "Waiting on long-running work" section: arm a notifier and
stop; one notification is a backgrounded command or a single `until` loop, many
is a Monitor. It states the one genuine exception — state the harness cannot
observe — and says where the poll belongs in that case, inside one backgrounded
loop rather than spread across turns.
- pre-push-gate points at it where the gate is actually run.
- pr-flow §7 points at it where the Copilot review is actually waited on, with
the loop written out. The count-not-existence trap is called out: on round two
the first round's review is still there, so `-ge 1` returns immediately.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017nLLLTGc37hQiC8s3mNyhq
Signed-off-by: cliffhall <cliff@futurescale.com>
`skills:eval` was at 38/46 with several skills measuring 0-33%. The low
scores were mostly bad eval cases rather than bad descriptions, for two
reasons that were nowhere written down:
- The harness runs each case with `--max-turns 1`, so the skill has to be
the model's FIRST tool call. A prompt asking "how does X work here", or
naming a concrete file, sends the model to Read/Grep first — a better
answer to the question, scored as a miss. Every 0% case was one of these.
- `AGENTS.md` is resident on every turn, so a prompt it already answers is
answered without any skill and the case can never pass.
Replace the cases that measured the wrong thing, expand every model-invoked
skill from 3 to 5 positives (negatives kept) so one flake cannot cross the
threshold, and reshape `local-dev`'s description to the action-first form.
Add `docs/skill-authoring.md` with the case shapes that fire, the ones that
cannot, and the probe-then-measure loop.
RUNS=5 npm run skills:eval: 63/63 at or above threshold, 60 at 100%,
all 18 negatives clean.
Closes#2202
Signed-off-by: cliffhall <cliff@futurescale.com>
`disable-model-invocation: true` does not merely make a skill prefer `/name` —
the model cannot invoke it at all, and its description is absent from the skill
listing. So "create a PR for #2163", which is how that work actually starts,
could never reach `pr-flow`. The original rationale ("procedures with side
effects we'd invoke by name anyway") conflates invoking a skill, which only
loads instructions, with performing the procedure it describes.
Flipped `pr-flow`, `pre-push-gate`, `board-ops` and `test-servers` to
model-invocable. `user-invocable` is an independent axis, so this is purely
additive — every `/name` still works. `issue-create`, `issue-triage` and
`release` stay deliberate.
`board-ops` is in the set because `pr-flow` and `issue-create` delegate their
card steps to it: a pointer from a model-invocable skill to a manual-only one is
a dead end for the model.
Costs weighed: the listing share goes 1,199 → 2,256 of 4,000, and a spurious
load costs ~250 characters where a missed one costs a wrong base branch or an
unsigned commit. The rules stay resident in AGENTS.md either way — this improves
the odds of getting the procedure too, it does not become the guarantee.
Eval cases committed for all four, measured at RUNS=3: pre-push-gate, board-ops
and test-servers 5/5; pr-flow 4/5, with "take it through to a pull request" at
100% and the Copilot-review case borderline. Three initial cases were replaced
rather than tuned green: their answers are resident in AGENTS.md, so the model
answering without the skill is correct behaviour, not a miss — the rule this
file already records about what makes a valid trigger case.
AGENTS.md's maintenance rule now says to default to `false` and explains why,
so the advice this change walks back does not get re-applied.
Signed-off-by: cliffhall <cliff@futurescale.com>
- The CI wiring vouch accepted any syntactically-executable `run:`, so a step
moved into a release-only job or put behind `if: false` still reported as
wired while PR CI validated nothing. It now requires an UNCONDITIONAL step:
any `if:` on the job or the step disqualifies it, since this guard cannot
evaluate an Actions expression and "runs sometimes" is not the property being
asserted. Seven predicate cases, including the two conditional shapes and a
multi-line `run:` that must still count.
- The `local:gate` stage list now has one owner, `docs/quality-gate.md`. It had
three copies, and they drifted apart across rounds 5, 6 and 8 of this review —
which is the argument the PR itself is making, applied to itself.
Signed-off-by: cliffhall <cliff@futurescale.com>
- verify:skills:cli — the authoritative validator is now a GUARANTEED step in
`local:gate` and CI, not a best-effort hand-off. It resolves the CLI itself
(an installed one at 2.1.233+, else a pinned `npx -y`), so both tiers run the
same script and cannot drift. `verify:skills` keeps skipping when the CLI is
absent, which is right for `validate`: fast, offline, no Claude Code required.
- skill-manifest: the 1,536-char listing-entry cap covers `description` +
`when_to_use` together; checking the description alone passed an over-cap
entry. `when_to_use` is now parsed, validated and counted, with boundary tests
at 1,536/1,537.
- verify-skills: report the budget as *this repo's contribution*. The real
listing budget is shared with bundled skills and the contributor's own
~/.claude/skills, none of which is visible from here, so the number was
claiming more than it measured.
- skill-eval: a negative case now means "no skill OF THIS REPO'S fired". It
failed on any Skill invocation, so a contributor with an unrelated global
skill got a false failure about their environment rather than these skills.
- docs/architecture + local-dev: the Node backend runner gets its
`@inspector/core` alias from `clients/web/tsup.runner.config.ts`, not from
Vite. The old text sent runner work to the wrong config.
- local-dev: the tarball does not ship "only each client's build/" — the
allowlist also carries `clients/web/dist`, `clients/web/static` and the
install helper. States the invariant that actually matters instead.
- issue-triage: the test for needing triage is "no board card". Adding "and no
milestone" would skip the approved-but-unboarded case the same section then
handles. Also corrected the `$M` note: the lookup is `--state all`, so closed
issues DO have entries — `isopen` is about the invariants, not the lookup.
- issue-create: replaced "all five" with a per-version table. Steps 3 and 6
(milestone, Priority) do not exist for v1, so the old list opened with a rule
the same skill later tells you to violate.
Signed-off-by: cliffhall <cliff@futurescale.com>
Closes#2163
`AGENTS.md` was one 1,223-line contract loaded in full on every turn, whether
the task was a one-line CSS fix or a release cut. This splits it: rules stay
resident, procedures move to `.claude/skills/`.
- Ten skills under `.claude/skills/`, seven `disable-model-invocation: true`
(invoked by name only, so they cost no listing context and have no trigger
question) and three model-invoked with committed eval cases.
- `AGENTS.md` 1,223 → 380 lines: rules, a skills index, and a project tree
reduced to one line per entry. The removed recipes are not duplicated.
- `README.md` 811 → 105 lines, split into `docs/{architecture,quality-gate,
test-servers,publishing,docker}.md`, and dropped from `CLAUDE.md`'s auto-load.
- `.github/copilot-instructions.md` and its mirroring rule removed — Copilot
reads `AGENTS.md`.
- `npm run verify:skills` (in `validate`, so in `local:gate` and CI) parses each
SKILL.md the way Claude Code does, requires an explicit invocation mode and
eval cases for model-invoked skills, and budgets the listing.
- `npm run skills:eval` runs the committed trigger cases headless.
Signed-off-by: cliffhall <cliff@futurescale.com>