A modern-era `subscriptions/listen` is a long-lived request: the first
message on its stream must be `notifications/subscriptions/acknowledged`,
and the JSON-RPC `result` for the listen id is reserved as the
graceful-closure marker. A server that answers the listen request with a
bare `result` is saying "acknowledged and closed in the same breath" — the
SDK settles the subscription `graceful` and rejects the pending `listen()`.
The Inspector read that rejection as an ordinary drop: eight re-lists over
roughly a minute, the badge flickering `Reconnecting…`, and a final bare
`Stream ended` that said nothing about why. Accepting the message was
never wrong — it is a well-formed graceful-closure response. The silence
was.
- `core/mcp/subscriptionAck.ts` owns the predicate. The SDK gives this
close no code of its own — it is the same `SdkError(ConnectionClosed)`
any pre-ack close carries — so the predicate reads the message, since
the alternative is refusing to retry a genuinely transient drop.
- The condition is deterministic, so the stream ends on the first
occurrence instead of spending the whole backoff run. Both routes are
covered: the one a subscribe/unsubscribe reaches, and the one a
reconnect reaches when an acknowledged stream drops and the server has
since started refusing.
- A `"never-acknowledged"` status of its own, not `"ended"` — `ended`
means an expected close. It surfaces as the thrown error's message, an
orange "Not acknowledged" badge, and a notice in the panel.
- `subscriptions-never-acknowledged-http.json` reproduces it. It
acknowledges the first listen that subscribes to a resource and refuses
every one after, which is what makes the badge reachable by hand.
Closes#2097
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot's thirteenth pass, two comments, both real.
- `1e-400` has a nonzero mantissa and parses to `0`. The digit comparison skips
it for being exponent-form and it is not negative zero, so nothing saw a
document that says one number and sends none of it. Caught now by pairing
`Number(literal) === 0` with a nonzero digit in the mantissa, which leaves a
literal written as zero (`0e-400`) and a subnormal that still parses to
something (`1e-320`) alone.
- The `resource` content-block branch rendered every embedded resource in a
plain code block, ignoring `resource.mimeType`, so a prompt message carrying
JSON did not inherit this migration even though the text-block branch did. An
embedded *text* resource declaring JSON now goes through the same dispatch.
Narrowed to JSON, as the Network tab's bodies are: routing every declared type
through would also put an embedded `text/html` resource into the sandboxed
frame and a `text/csv` one into a table. The Resources screen already renders
resource contents that way, so doing it here too is defensible — but it is a
change to what a tool result *is*, and belongs to whoever decides that.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UL9retfvAXRgvi6EWk4SY4
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot's twelfth pass. The suppressed comment is right and is fixed here; the
inline one is real too, but needs a core API change and is filed as #2171.
`-0` is represented exactly, so the digit comparison had nothing to say about
it — but `JSON.stringify` writes it as `0`, so the loss happens on the way
*out* rather than on the way in. The editor showed `-0` and the wire carried
`0`, and the viewer rewrote a received `-0` while pretty-printing.
`hasImpreciseIntegerLiteral` becomes `findUnsendableNumberLiteral`, checking
`Object.is(Number(literal), -0)` for every numeric spelling — `-0`, `-0.0`,
`-0e1` — before the integer-only digit check. Returning the offending literal
rather than a boolean lets the message name it, which is more use than either
of the two rules behind it and matches how the duplicate-key message reads.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UL9retfvAXRgvi6EWk4SY4
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot's eleventh pass: three comments, one defect in three places.
`JSON.parse` accepts duplicate member names and keeps the last without
complaint, so `{"role":"user","role":"admin"}` becomes `{"role":"admin"}` —
a document that renders, and submits, as *less* than it says. In the read-only
viewer that is the Inspector hiding what the server sent; in a draft it is the
editor showing more than the wire will carry. Nothing downstream could catch
it, because by the time `JSON.parse` returns the evidence is gone.
New `findDuplicateObjectKey` scans the source, scoped per object so
`{"a":{"a":1}}` and `[{"a":1},{"a":2}]` are fine, and compares names by decoded
value so `"a"` and `"a"` collide as they should. It shares its
escape-handling with the number-literal scanner, which now reads strings
through the same helper rather than skipping them inline.
Wired into all four JSON-draft parsers and into the viewer's faithfulness
check, so the same document is refused, or shown unindented, everywhere.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UL9retfvAXRgvi6EWk4SY4
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot's tenth pass generated no new inline comments. Of its two suppressed
ones, this fixes the first and declines the second.
`ContentViewer` pretty-prints by `JSON.parse` then `JSON.stringify`, which is a
round trip through JavaScript's number type and is not lossless. A server
sending `{"id":9007199254740993}` was shown `…992`, and one sending
`{"limit":1e400}` was shown `null`. Neither is a formatting difference: both
are the viewer telling the reader something untrue about the payload it
received, which for an inspector is the worst kind of bug. It predates this PR
— `formatJson` has always round-tripped — but this PR is where the read-only
JSON path was rebuilt, and the same two predicates the draft parsers use answer
it exactly.
Both formatters now display the payload as it arrived when reindenting would
alter a value: unindented, but honest. The copy button already copied the
original text either way, so this makes the screen agree with it.
Not changed: a literal whose *spelling* is normalized but whose value is not.
`0.10000000000000001` and `0.1` are the same double, as are `1e2` and `100`, so
those still format. Rejecting them would mean refusing any literal not already
in JS's shortest form — `1.50`, `1e2`, `0.5000` — which blocks drafts that send
exactly what they mean. The integer guard stays because there the digits name a
value the double is not.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UL9retfvAXRgvi6EWk4SY4
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot's ninth pass, three comments, two of them consequences of round 8.
- The coercion check resolved the tool from the *entry's* name while the modal
lets `name` be edited, so retargeting an `echo` replay at `add` validated
against `echo`. The modal now takes the whole tool list and resolves from the
draft's current name, which is the one the dispatch will look up.
- `IMPRECISE_INTEGER_ERROR` (was `ROUNDED_INTEGER_ERROR`) no longer names the
safe-integer range, because the range is not the rule: a whole number past
±(2^53 − 1) that is exactly representable round-trips and is accepted. It
talks about exact representability instead, and its doc links the helper that
actually exists.
- `SchemaJsonField` carries the parser's reason instead of flattening every
case to "Not valid JSON", which misdiagnosed a document that parses fine and
holds a number this client cannot send — leaving the user reading about
syntax while looking at syntactically fine JSON.
The last one had a bug the gate caught rather than the tests: empty text is not
a *problem*, so routing the value through the reason check let `JSON.parse("")`
throw out of the change handler. It surfaced as five unhandled errors across
four suites with every assertion still green, which is why `npm run ci` and not
`npm run test` is the gate. Excluded explicitly, with a regression test.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UL9retfvAXRgvi6EWk4SY4
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot's eighth pass, three comments, all real.
- The precision check now reads the **source text**. Inferring the literal from
`String(value)` was wrong in both directions: it accepted every full-form
integer at or above 1e21 (`1000000000000000000001` parses to `1e21` and is
written back as `1e+21`), and refused `2^54`, which is written out in full
and exactly representable. `hasImpreciseIntegerLiteral` scans the draft for
numeric tokens — skipping strings, so a digit-string value is untouched — and
compares `BigInt(literal)` against `BigInt(Number(literal))`, which is exact.
- `""` is now reported as a surviving cursor for `tools/list` only. It builds
its params with `cursor !== undefined` and carries the empty string
deliberately; the other four list adapters use a truthiness check and drop
it, so the editor showed `{"cursor":""}` while `{}` went out. The asymmetry
looks like a latent bug in those four, but this function's job is to describe
what the dispatch does.
- `callTool` runs every string-valued argument through `convertToolParameters`,
so `{"count":"2"}` against a numeric schema is sent as `{"count":2}`.
`reshapedReplayParam` now takes the tool and detects that by running the same
conversion and comparing, rather than restating its rules — the two cannot
drift. `tools` is threaded to `ProtocolEntry` for it, optional throughout: an
unknown tool skips the check rather than blocking a replay.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UL9retfvAXRgvi6EWk4SY4
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot's seventh pass, three comments, all the same class: the editor showing
one value while the wire carries another.
- `JSON.parse` rounds a whole number past 2^53−1 to the nearest double, so a
draft reading `{"id":9007199254740993}` submits `…992`. New
`hasRoundedInteger`, applied by all four JSON-draft parsers — the raw
arguments editor, `SchemaJsonField`, the Edit-and-replay modal, and
`parseJsonObjectDraft`, which Copilot did not flag but shares the defect.
It is narrower than "unsafe integer": it also requires the number's shortest
form to be written out in full, because JS stringifies from 1e21 upward in
exponent form and such a value was typed that way — `{"n":1e308}` is a
legitimate `_meta` value that `parseJsonObjectDraft`'s tests already pin as
accepted. It still refuses the rare full-form integer that happens to be
exactly representable, erring toward refusing a sendable value rather than
misreporting an unsendable one — the trade `toNumericValue` already makes.
- `getPrompt` runs `convertPromptArguments`, which JSON-stringifies every
non-string argument, so `{"count":2}` leaves as `{"count":"2"}` while the
editor still shows a number. `reshapedReplayParam` now rejects a non-string
prompt argument. Not a workaround: the spec types
`GetPromptRequest.params.arguments` as `Record<string, string>`, so a string
is the only thing a prompt argument can be. `tools/call` is untouched —
`callTool` sends its arguments as given.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UL9retfvAXRgvi6EWk4SY4
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot's sixth pass generated no new inline comments; both suppressed ones
were right.
- `arguments` surviving the key check is not the same as being sent as
written. `replayProtocolRequest` applies `arguments ?? {}`, so a `null` shown
in the editor reaches the wire as `{}`; an array or scalar is not nullish and
rides the cast into a call whose type says it is a named-argument record.
`reshapedReplayParam` rejects both before Send. `name` and `uri` are
deliberately not checked there — the dispatch already refuses those with a
reason the caller shows as a toast, so they fail visibly rather than
silently.
- `NetworkEntry` never forwarded the body's content type, so the Network tab
could not reach the declared-JSON branch at all and a malformed
`application/json` response read as plain text with no sign it was meant to
be JSON. Forwarded — but only when the declared type *is* JSON: passing it
wholesale would also route an HTML body into the sandboxed frame and a CSV
one into a table, which is a change to what the Network tab is and not one
this makes.
The `NetworkEntry > Auth Success` play function moved off `textContent` for
body assertions. Ace repaints its rows on an animation frame and virtualizes
them, so reading the DOM straight after Reveal returned the previous rows
under load — it passed in isolation and failed in the full run. It now reads
the editors' documents alongside the DOM text, and waits.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UL9retfvAXRgvi6EWk4SY4
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot's fifth pass: one comment, and the completion of the previous round's
fix. Seeding the editor from `replayableParams` stopped it *offering* a key
the dispatcher would drop, but nothing stopped one being typed in — adding
`_meta` to a `tools/list` draft still let Send close the modal and discard it.
`parseParamsDraft` now takes the method and rejects any key the dispatch would
not read, so Send is disabled with the offending names rather than silently
dropping them. It asks the same `replayableParams` the seed is built from, so
the editor and the dispatcher cannot disagree about which keys survive.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UL9retfvAXRgvi6EWk4SY4
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot's fourth pass, one inline plus two suppressed. All three were right.
- The modal presented the whole captured frame as editable, but replay does
not re-send a frame: it dispatches through the typed InspectorClient
methods, whose signatures have no room for `_meta` (a captured `tools/call`
carries `_meta.progressToken`) or for any list-request key but `cursor`. So
editing `_meta` and pressing Send transmitted something other than what was
on screen. `replayableParams` now projects the frame down to what the
dispatcher actually reads, the modal seeds from that, and it names what was
left out rather than leaving the difference to be discovered. The projection
lives beside the dispatch switch because the two are halves of one contract.
- `ContentViewer` gains `jsonLabel`, so a read-only JSON editor can say what
it holds. Every one of them announced "JSON content", and an expanded
Protocol entry has two while the list has many pairs — leaving a screen
reader with indistinguishable textboxes and only the visible headings to
tell them apart. Protocol entries now name theirs per method and direction,
Network entries per request/response body.
- `isJsonDocument` became `formatJsonDocument`, returning the formatted text
instead of a boolean. The heuristic path parsed the payload to decide and
then parsed it again to render; Protocol and Network hand over serialized
bodies as untyped text and are not virtualized, so a long history paid twice
per payload per render.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UL9retfvAXRgvi6EWk4SY4
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot's third pass generated no new inline comments; all three of its
suppressed ones were right.
- `ariaLabel` is now re-applied from the wiring effect, not only at mount.
`setOptions` updates Ace's option when the prop changes, but Ace recomputes
the textarea's `aria-label` from it inside `TextInput.setAriaLabel()`, which
it calls when the cursor moves — so a name that changed while the editor
stayed mounted (a tool refreshed in place under a new field title, which
`SchemaJsonField` passes straight through) left the visible label and the
accessible name disagreeing until the user clicked into the box. `onLoad`
keeps doing it too, since an effect runs after paint and this is the
control's only name.
- The README claimed this editor is on "every surface where JSON is typed or
displayed", which is false in two places it now names instead:
`ExperimentalFeaturesPanel`'s JSON-RPC *response* is still a read-only
`Textarea` (only its request box moved), and `OAuthTokenField` renders a
decoded JWT in a `Code` block beside the raw token. Both bypass
`ContentViewer` and so are not reached by its JSON branch. Documenting them
as exceptions is what keeps the section from sending a maintainer to the
wrong abstraction.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UL9retfvAXRgvi6EWk4SY4
Signed-off-by: cliffhall <cliff@futurescale.com>
Two more from Copilot's second pass, both real.
- Every JSON-draft parser now rejects a value `JSON.stringify` cannot write
back. `JSON.parse("1e400")` yields `Infinity`, which serializes as `null` —
so an editor showing `1e400` would have sent `null`, which is exactly the
misreport `isSerializableJson` was written for. `parseJsonObjectDraft`
already guarded; the raw-arguments editor and the Edit-and-replay modal did
not, and neither did `SchemaJsonField`'s `parseJsonDraft` — the last
predates this PR but is the same defect in the same family, so it is fixed
with them rather than left as the odd one out.
- Editing a root union's discriminator in the raw document now moves the
Variant picker. Nothing in `values` names a branch, so the index is held by
the form and was only re-derived on `resetKey` or a rewritten union; a raw
edit had no other signal, so `{"kind":"email"}` → `{"kind":"sms",…}` left
the picker on Email and switching back to the widgets rendered the Email
branch over SMS values. The current branch is kept when the values identify
none, since the discriminator is absent every time it is retyped.
The raw editor is keyed by entity only, not by entity-and-branch like the
per-field editors: it holds the whole arguments object, so a branch move must
re-sync it rather than remount it — a remount would reformat the text being
typed and drop the caret to the top.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UL9retfvAXRgvi6EWk4SY4
Signed-off-by: cliffhall <cliff@futurescale.com>
- Cap the read-only editor's `maxLines` at 200. Uncapped, Ace renders every
line of a payload and its viewport virtualization never engages — which
matters because the Protocol and Network lists are not virtualized and keep
each entry's payload mounted inside its `Collapse`. 200 is chosen so no real
payload nests a scrollbar inside its host's while the pathological one stays
bounded; the StructuredOutputPanel `Large` story now pins both halves (full
payload in the document, only part of it in the DOM).
- Take a disabled editor out of the tab order and give it `aria-disabled`.
Ace has no disabled state, so its hidden textarea kept `tabindex="0"` and a
keyboard user could tab into a field every neighbouring control had dropped
— landing somewhere that looks editable and swallows what they type. A
merely read-only editor stays focusable, since a payload has to be
keyboard-scrollable (WCAG SC 2.1.1).
- Reword a confusing comment in the EditReplayModal test.
The `Disabled` story additionally scopes the axe `color-contrast` rule off:
WCAG 1.4.3 exempts inactive components, and axe cannot see that the dimmed
gutter belongs to one because the disabled state lives on Ace's hidden
textarea. Scoped to that one story so the rule still covers everything else.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UL9retfvAXRgvi6EWk4SY4
Signed-off-by: cliffhall <cliff@futurescale.com>
Extracts the Ace integration #2094 carried inline into a shared
`elements/JsonEditor`, and renders it on every surface where the web
client types or displays JSON.
The element is deliberately text in, text out. The two editing contracts
above it disagree about what an unparseable draft means — JsonObjectInput
keeps the last valid object and says nothing to its parent, SchemaJsonField
reports `undefined` and blocks submission (#2020) — so parsing, and the
draft/value split that goes with it, stays with each caller.
Surfaces: SchemaJsonField (inherited by all four SchemaForm consumers), a
new "Edit as JSON" switch for the whole arguments object, the server.json
File Contents box, the raw JSON-RPC request box, ContentViewer's JSON
branch (read-only, inherited by its eleven consumers), and a new "Edit and
replay" modal on a Protocol entry.
Ace read-only replaces the CodeHighlight JSON path and the Prism `json`
grammar loader is dropped: folding, not colorization, is what it adds, and
two highlighters for one language drift. `wrap={false}` callers and untyped
text that only looks like JSON keep the plain renderer.
Closes#2151
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UL9retfvAXRgvi6EWk4SY4
Signed-off-by: cliffhall <cliff@futurescale.com>
The root `ci` script was never what runs in GitHub CI, and the name worked
against us three ways: it collides with the built-in `npm ci` (which does
something else entirely and is one keystroke away), it invites the
cross-engine passes into a workflow by looking like the thing a workflow
should call, and it blurs "GitHub CI" and "the local gate" in every doc
that names it.
- Rename `ci` → `local:gate` and `ci:storybook` → `local:storybook`, with
no back-compat alias: `npm run ci` now fails with npm's missing-script
error, which prints the available scripts.
- Add `scripts/lib/workflow-gate.mjs` + its `test:scripts` suite, which
runs over the repo's real `.github/workflows/**` and fails on an
invocation of a `local:*` script, of a non-Chromium engine pass (derived
from SUPPORTED_BROWSERS), or of `smoke:web:engine`, or on `SMOKE_BROWSER`
set to anything but a literal `chromium`. It does not forbid
`npm run smoke`, `smoke:web:chromium` or `smoke:tui` — those belong in CI
and are there today. Comments are not scanned, so the workflow can still
explain itself. This is the durable half; the rest is prose.
- Document the two-tier model once, in the root README ("Two tiers: GitHub
CI and the local gate"), and point the other docs at it rather than
restating the split.
- Sweep the ~40 stale references across README, AGENTS.md,
.github/copilot-instructions.md, the client READMEs, the roadmap doc and
the script headers. AGENTS.md and copilot-instructions.md change
together, per the mirror rule.
No gate changes what it actually runs.
Signed-off-by: Cliff Hall <cliff@futurescale.com>
Signed-off-by: cliffhall <cliff@futurescale.com>
Three findings, all valid.
**The read/get stages asserted an RPC status, not a render.** #2148 asks
for the resource content and the prompt messages to *render*, and
`data-read-status` / `data-get-status` flip the moment the call resolves
— so the smoke stayed green with the panel deleted. `ResourcePreviewPanel`
and `PromptMessagesDisplay` now carry `data-testid="resource-preview"` /
`"prompt-messages"`, and each stage waits on the status **and** the
rendered panel. Verified by breaking each testid: the smoke fails with
`reading `events` did not render a preview — last observed:
data-read-status="ok"`, which is the finding stated back exactly.
**`smoke:web:tabs` followed ambient `SMOKE_BROWSER`**, so
`SMOKE_BROWSER=firefox npm run ci` would have run the supposedly
Chromium-only smoke under Firefox — contradicting both this PR's stated
scope and the gated-tier invariant in `run-engine-smokes.test.mjs`. The
npm script now pins `chromium` on **both** halves (install and launch)
and the smoke resolves through `resolveRequestedBrowser(argv, env)`, where
an explicit argument wins over the environment; a new case in that same
test file pins it, including that the smoke stays out of `ENGINE_SMOKES`.
**The AGENTS rules were not mirrored into `.github/copilot-instructions.md`.**
Correct, and worse than an omission: that file's engine bullet asserts the
headless web smokes are "engine-parameterized, not Chromium-only", which
this PR made false. It now names `smoke:web:tabs` as the deliberate
exception, and carries the genuinely review-citable new rule — assert
`data-*`, never copy, and never stop at an RPC status where the ask was
that something render.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UL9retfvAXRgvi6EWk4SY4
Signed-off-by: cliffhall <cliff@futurescale.com>
The web client had exactly one connected-flow smoke and it was the Apps
tab. `smoke:web:browser` proves the bundle boots and paints but never
connects; `smoke:web:app` / `smoke:web:elicit` connect but only drive the
Apps surface. So the three highest-traffic tabs were unexercised through
the prod bundle end to end — everything covering them (unit tests,
Storybook, the integration project) mocks or bypasses the prod server, so
a regression living only in the built bundle or in the prod Hono
backend's wiring of a tab passed all of them.
`scripts/smoke-web-tabs.mjs` drives all three against one server on one
browser launch (~5s added wall-clock): Tools runs `list_items` and
asserts its `structuredContent` section rendered (#1908), Resources reads
`events` with the template list asserted separately — `resources/list`
and `resources/templates/list` are different calls and either can fail
alone — and Prompts fetches the argument-less `simple_prompt`.
Every assertion is on a `data-*` attribute, never on copy, mirroring the
`data-app-status` precedent: each screen now carries a readiness contract
(`data-tool-count` / `data-call-status` and its Resources / Prompts
equivalents), tabulated in the web README and pinned by screen unit tests
so a rename fails loudly there rather than as an opaque timeout here.
The deep-link connect step is extracted to `lib/deep-link-connect.mjs`
rather than copied a third time. That matters because `parseDeepLink`
ignores a link it cannot validate rather than reporting one, so a drifted
copy fails as an opaque connect timeout in whichever smoke was not
updated. `smoke:web:elicit`'s hand-rolled copy is retired onto it.
Chromium-only and deliberately not in `ENGINE_SMOKES`: the engine tiers
exist for the MCP Apps sandbox's genuinely divergent primitives, and
these tabs are ordinary React and Mantine. Network, Protocol, Logs and
Tasks remain uncovered — a stated gap, not an oversight.
Closes#2148
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UL9retfvAXRgvi6EWk4SY4
Signed-off-by: cliffhall <cliff@futurescale.com>
- Move REPLAYABLE_PROTOCOL_METHODS / isReplayableProtocolMethod out of
components/groups/protocolUtils.ts into utils/replayableProtocolMethods.ts.
It is a pure predicate over a string set, so by the project's own lib-vs-utils
rule it never belonged under components/ — and keeping it there was what made
lib/protocolReplay.ts import 'up' into the component graph. Both consumers now
import from utils/; the predicate keeps its own test.
- Give replayProtocolRequest an exported ReplayClient = Pick<InspectorClient, ...>
naming the nine methods it calls, so a caller (and the test) can satisfy the
real contract instead of casting a stub into a whole client.
- Rebuild the protocolReplay fixtures as plain typed MessageEntry values. The
double cast had been hiding a real defect: MessageEntry.timestamp is a Date
and the fixture passed a number, so the assertion confirmed a shape
messagesToLogEntries cannot produce.
- Replace the window casts in authToken.test.ts with Reflect.set /
Reflect.deleteProperty. No 'as unknown as' remains in either test.
- Drop the stale 'floats top-right' sentence on ReAuthBannerBar, which moved
verbatim and arrived contradicting the paragraph below it.
Declined: re-homing ReAuthBannerBar's transform/zIndex as a theme variant.
'styles' is the Styles API rather than an inline style, Mantine exposes neither
property as a prop, and a styling change is out of scope for a phase whose
safety argument is that nothing was edited.
Signed-off-by: cliffhall <cliff@futurescale.com>
Phase 0 of #2126. Lines 239-668 of clients/web/src/App.tsx were already at
module scope — helpers, formatters, constants, and the toast subcomponents,
none of which close over component state — so the whole block moves verbatim
into files. App.tsx drops from 5,303 to 4,892 lines with no behavior change.
Placement follows the lib-vs-utils rule in AGENTS.md: pure computation to
utils/, anything touching the environment to lib/.
EMPTY_SETTINGS and the two loose toast ids deliberately do NOT land in a new
top-level src/constants.ts, which the issue suggested: the web coverage
include is a whitelist naming components/hooks/theme/lib/utils/server, so a
module there would have fallen out of the >=90 gate silently. They go under
utils/ instead.
ReAuthBannerBar is in the block but not in the issue's table — it was added
after the issue was written (#2108). It moves to components/groups/ReAuthBanner/,
beside the banner it wraps.
Every new module is at 100% on all four coverage dimensions. Two v8 ignores,
each justified in place: getAuthToken's typeof-window guard (a happy-dom
inherent path) and replayProtocolRequest's provably-dead default case.
Signed-off-by: cliffhall <cliff@futurescale.com>
Making every pinned field read-only left an optional one unreachable: the
schema is equally happy with or without it, but the form displayed a value the
user could neither send nor edit. An optional `const` is a yes/no rather than
a fixed answer, so it renders as its single choice, clearable — opting in sends
the schema's own typed value, opting out leaves the property absent. A required
one is still displayed read-only, since there is nothing to decide.
Signed-off-by: cliffhall <cliff@futurescale.com>
- `const` constrains a property that is PRESENT; it neither requires the
property nor acts as a default. It is now supplied automatically only where
the schema also requires the field — in `collectSchemaDefaults`,
`applySchemaConstants` and the TUI's initial values alike — so an optional
`dryRun: { const: true }` no longer turns a valid `{}` call into one that
asks the server to do something. A value that IS present is still corrected
to the constant, whatever supplied it, and the field stays read-only.
- Offerability is judged on the base+member merge rather than the raw member,
so `anyOf: [{ required: ["email"] }, { required: ["phone"] }]` over
root-declared properties is offered. It was declined, which left the gate
checking the base alone and accepting `{}` — which that schema rejects.
- The TUI's branch sections keep the schema's own `required` for the seeding
decision while still rendering every branch field non-required, which is what
keeps a static form submittable.
Signed-off-by: cliffhall <cliff@futurescale.com>
- branchesKey is built from the resolved alternatives themselves, not from
labels and field names: two branches can share both while pinning different
discriminators or typing a field differently, and a reorder of those went
unnoticed — the form then displayed one branch and submitted another.
- InspectorView gains a deep-link test with root-union appArgs: they name the
second branch, and the assertions pin the picker, the read-only
discriminator, THAT branch's default (not the first branch's), and the
absence of the other branch's field. The old shallow spread fails it.
Signed-off-by: cliffhall <cliff@futurescale.com>
- The seeding effect re-applies constants as well as filling absences: an
in-place schema change can move a `const` the user cannot edit, and the
read-only field then displayed the new value while `values` still held the
old one — which is what would be submitted. Ordinary defaults are still only
ever added, so an edited field keeps what the user put there.
- hasMissingIn checks own-property presence: a required argument legally named
`constructor` resolved to the inherited one and read as supplied, enabling
a submit the schema rejects.
- The TUI keeps the declared name as a branch field's fallback title. The
prefix is an internal field NAME, and buildFields labels from its map key —
so the showcase displayed `__b0__address` where the schema says
`address`.
Signed-off-by: cliffhall <cliff@futurescale.com>
`branchIndex` is a position, and a tool refreshed in place keeps its
`resetKey` — so a union reordered or rewritten with the same number of
branches left the index pointing at a different shape than the one the values
describe: the picker showed SMS while Execute submitted the email arguments.
The selection is now re-derived from the values whenever the alternatives
themselves change, keyed by their labels and declared fields.
Signed-off-by: cliffhall <cliff@futurescale.com>
- The seeding effect is keyed by the fixed values themselves as well as the
entity and branch. A tool refreshed in place keeps its `resetKey` and its
branch while its schema changes underneath, so a newly pinned field was
rendered read-only and never seeded — leaving a required one permanently
unsubmittable. The schema object's identity says nothing (callers rebuild it
every render), which is why the key is derived from what has to be seeded.
- branchLabel stringifies every primitive constant. `hasDiscriminator`
accepts distinct booleans and nulls, so a `true`/`false` union was
discriminated perfectly well and still labelled "Option 1"/"Option 2".
Signed-off-by: cliffhall <cliff@futurescale.com>
The carry filter dropped a name whose value was `undefined`, but clearing a
number or JSON field leaves exactly that: the name present with no value, which
is the user's answer rather than an absence. The incoming branch's defaults
then put the field's default back and undid the clear. Own-property presence
alone is now the test.
Signed-off-by: cliffhall <cliff@futurescale.com>
Rendering every `const` read-only assumed the caller had already seeded it,
which SchemaForm never did itself: `InlineElicitationRequest` passes its
values straight through and gates submit on hasMissingRequiredFields, so a
required `const` — a root union's discriminator among them — was displayed
and never supplied, leaving Submit disabled with no way to fix it.
The form now reports the fixed values upward once per entity, in an effect (the
parent's `onChange` cannot be called during our render), adding only names
absent from `values` — so a caller that already seeds sees no call at all and
the report cannot loop.
Signed-off-by: cliffhall <cliff@futurescale.com>
One conflict, in SchemaForm's `resetKey` reset: #2138 added the enlarge-caret
Map to clear there while this branch added the union branch selection. Both
belong in it, so the merged block clears the carets and re-derives the branch
from the incoming values.
Signed-off-by: cliffhall <cliff@futurescale.com>
Two more from review, both about field data the schema controls.
The caret record was a bare object keyed by field name, and field names
come from a server's schema. A field legitimately named `constructor` or
`toString` read back an inherited function rather than undefined, so the
documented end-of-value fallback never fired and that value reached
setSelectionRange. Use a Map, which has no such keys.
JSON Schema counts maxLength in Unicode code points; String.length counts
UTF-16 code units. A field holding one emoji measured 2, so a maxLength:2
field with room for another character was treated as full and refused its
newline. Count code points. The maxLength handed to the DOM input still
carries the HTML attribute's own UTF-16 counting; that predates this and
is left alone.
Signed-off-by: cliffhall <cliff@futurescale.com>
Two faults in the Enter path, both found in review.
The split read `values[fieldName] as string`, a cast over a
Record<string, unknown> fed by whatever a server's schema declares. A
string field holding a non-string default renders as text and then threw
on `.slice`, so one keystroke crashed the panel. Read the control's own
value instead: always a string, and the exact string the selection
offsets index into.
The caret was recorded only when the newline fit, so pressing Enter mid
value in a field at its maxLength enlarged without one and threw the
caret to the end — a second surprise on top of the newline that did not
arrive. Record it on both paths, `start + 1` after an insertion and
`start` otherwise.
Signed-off-by: cliffhall <cliff@futurescale.com>
isComposing covers browsers that fire compositionend after the
committing keydown. WebKit is reported to fire it before, which leaves
isComposing already false and the CJK user back to a stray newline on
every committed word.
Also reject keyCode 229, the pre-isComposing sentinel for a keydown the
IME consumed, which such an event still carries. Deprecated, and kept
anyway: nothing non-deprecated distinguishes that event, and it cannot
swallow a real Enter, which reports 13 — tested both ways so the
sentinel is provably not eating ordinary keystrokes.
The ordering claim is second-hand; the guard is taken on its own merits,
since its downside is bounded at zero and it covers any browser whose
composition events land too late rather than one vendor.
Signed-off-by: cliffhall <cliff@futurescale.com>
The handler carried four guards, a preventDefault and a state
transition inline in the TextInput's props, which is what AGENTS.md
rules out ("NEVER use inline code; instead extract to functions in the
same file"). Name it handleEnlargeKeyDown and put it beside
enlargeWithNewline, where the comment can enumerate why each condition
is there rather than sitting between two JSX props.
No behavior change.
Signed-off-by: cliffhall <cliff@futurescale.com>
Enter appended its newline to the end of the value regardless of where
the caret was, so pressing it in the middle of `abc|def` produced
`abcdef` with a trailing blank line rather than splitting the text, and
a selected range was kept rather than replaced. That is a rewritten
value, not just a misplaced caret, and no editor behaves that way.
Split at the field's own selection and replace any selected range, then
mount the text area with the caret just after the inserted newline —
EnlargedStringField takes an explicit caretAt for this. Pointer
activation passes none and keeps falling back to end-of-value, since a
click carries no meaningful position. The maxLength check now prices the
resulting value, so replacing a selection can free the room the newline
needs.
The two maxLength tests were asserting against a stub onChange, which
froze the value and made "it did not change" pass whatever the component
did. They now run on a seeded stateful harness, with a no-maxLength
control so the constraint is shown doing the work.
Signed-off-by: cliffhall <cliff@futurescale.com>
Enter is also how a Japanese, Chinese or Korean input method commits the
candidate being composed. That keystroke means "accept this word", not
"new line", so the shortcut fired on every word such a user finished —
enlarging the field and inserting a stray newline each time.
Guard on event.nativeEvent.isComposing. The test pairs the composing case
with a negative control dispatching the same event with the flag off, so
a test that stopped reaching the handler cannot pass for the wrong reason.
Signed-off-by: cliffhall <cliff@futurescale.com>
The App deep link seeded defaults and spread its `appArgs` over them, which
replaces a nested object wholesale: `{ config: { kind: "sms" } }` discarded
the nested SMS branch's own defaults, which the form then displayed while the
submitted arguments omitted them. New seedSchemaValues merges the two per
level, picking each nested branch from the nested values, and the supplied
value still wins wherever the two meet.
Signed-off-by: cliffhall <cliff@futurescale.com>
- TUI missingRequiredFields treats an empty string as supplied when the
property's own `const` pins it there. The one-option control cannot produce
anything else, so reporting the seeded value as missing made such a branch
permanently uncallable.
- A nested SchemaForm is reset by the branch-aware key too. Two outer
alternatives can both carry the same nested object field, and a nested form
left mounted across an outer switch kept displaying the inner branch chosen
for the other one while the newly seeded values described another shape.
Signed-off-by: cliffhall <cliff@futurescale.com>
- rootUnion: a merged declaration pairing a `const` with an assertion this
module cannot evaluate (`minimum`, `pattern`, …) is declined. Proving the
conjunction safe is the requirement, not disproving it — `minimum: 10`
beside `const: 1` is as unsatisfiable as a type mismatch.
- declaresAnyFields counts a `$ref`: its shape is unknown rather than empty,
so `anyOf: [{ $ref }, { $ref }]` no longer reports an App tool as
input-free and auto-invokes it with `{}`.
- SchemaForm keys its draft-holding fields by the active branch as well, so a
half-typed `-` or an unparsed JSON draft cannot survive a switch into a
same-named field of the incoming branch — with both parent values
`undefined`, nothing else tells the field the entity changed.
Signed-off-by: cliffhall <cliff@futurescale.com>
- selectBranchIndex compares a discriminator structurally: a `const` may be
an object or array, and deep-link arguments arrive as freshly parsed
instances that could never be reference-equal to the schema's own.
- New applySchemaConstants, applied by InspectorView AFTER the deep link's
`appArgs` are spread over the seeded defaults. The form renders a pinned
field read-only, so a link disagreeing with one would otherwise auto-open an
App with a hidden value contradicting the shape on screen.
Signed-off-by: cliffhall <cliff@futurescale.com>
- rootUnion: a `oneOf` demands that EXACTLY one alternative match, which
flattening cannot preserve, so it is offered only when a discriminator makes
the alternatives mutually exclusive; `anyOf` makes no such claim and is
unaffected. An empty `additionalProperties` schema is the equivalent of
`true` and no longer declines a union.
- selectBranchIndex: falls back to the branch whose own required fields the
values supply, so an undiscriminated union's values open the picker on the
shape they describe rather than on the first branch.
- admitsNull: honors a sibling `nullable: true` beside `const: null`.
- SchemaForm: a value is carried only where the incoming branch leaves the
root's declaration as it found it; anything it declares itself is reset,
since it may type the name differently from where the value was typed.
`hasOwn`/`fromEntries` throughout, so `constructor` is not read as a
supplied value and `__proto__` is not dropped into the prototype setter.
- TUI: the same prototype-safe construction on the way out of the form, and
the chosen branch's `required` list is checked at submit — rendering a
branch's fields optional makes the FORM satisfiable, not the call, so the
missing names are reported rather than a known-invalid call being sent.
Signed-off-by: cliffhall <cliff@futurescale.com>
- rootUnion: decline a union that adds fields under a restrictive root
`additionalProperties`. The keyword constrains what its SIBLING
`properties` does not name, so the original schema admits none of the
branch fields; flattening moves them beside the keyword, where they read as
allowed and the form would submit what the schema forbids.
- `default` joins the annotation set: it constrains nothing, so two
declarations suggesting different initial values no longer conflict.
- Property records are read with `Object.hasOwn` and built with
`fromEntries`/`defineProperty`. `properties` is a JSON record, so
`constructor` is a legal argument name that `in` reported as a collision
the root never made, and `__proto__` is one that assignment would drop
into the legacy prototype setter instead of keeping as a field.
- SchemaForm: a value survives a branch switch unless BOTH branches declare
the name. A root argument the outgoing branch merely specialized is still a
root argument in a branch that inherits it, so dropping it erased a valid
value.
Signed-off-by: cliffhall <cliff@futurescale.com>
- rootUnion: an `allOf` member is foldable only when it states nothing beyond
what the merge applies (`type`/`properties`/`required` plus annotations),
so a nested `anyOf`, a `not`, or an `additionalProperties` can no longer
be erased along with the keyword; members are checked against the
ACCUMULATED merge, so two of them contradicting each other is caught even
when neither contradicts the root.
- admitsNull: `const: null` admits null, so a required field pinned to it is
no longer seeded with the one value it accepts and then reported missing.
- collectSchemaDefaults takes the values a caller is about to overlay, and
seeds the branch THEY identify — the App deep link passes its `appArgs`, so
branch 0's defaults can no longer sit invisibly under branch 1's arguments.
- The branch inference moves into core as `selectBranchIndex`, shared by the
seeding and the form's picker so the two cannot disagree.
Signed-off-by: cliffhall <cliff@futurescale.com>
- rootUnion: a branch restating a constraint the root states differently is
declined (keywords at one level are conjunctive and no intersection is
computed here), while annotations may disagree freely. An `allOf` with a
member it cannot fold in — JSON Schema's boolean form, or a $ref whose
constraints are unknown rather than absent — is left intact instead of
merged-and-stripped, which would turn an unsatisfiable schema into a
fillable form.
- rootUnion: `declaresAnyFields` counts the raw composition members, so
`hasInputFields` reports fields for a union the resolver declines and an
App tool is never auto-invoked with empty arguments.
- SchemaForm: the picker opens on the branch the supplied values identify
(an App deep link overlays its args, so they can name another branch), and
a branch switch no longer carries a value the outgoing branch declared —
the branches may type the same name differently.
- TUI: a base property some branch redeclares is offered in EVERY branch's
section under that branch's inherited or specialized declaration, so a
branch that does not redeclare it can still supply a required root
argument.
Signed-off-by: cliffhall <cliff@futurescale.com>
Every string field in a tool or elicitation form carries an enlarge
button in its right section, so tabbing through a form stopped on one
between each pair of fields. Give it tabIndex={-1}, as #1487 did for the
clear button.
That button was deliberately left in the tab order by #2042, on the
grounds that clearing has a keyboard equivalent and enlarging has none.
So give it one: Enter on the focused single-line field enlarges it and
enters the newline. Nothing was listening for that key there — no
consumer renders SchemaForm inside a <form> — and it is the key a user
presses trying to type the newline the input swallows, which is the
failure #2042 exists to fix.
Enter enters the newline rather than only reshaping the field, since
consuming the keystroke leaves the next word running on from the last. A
field already at its maxLength is enlarged without one. Shift+Enter
enlarges too; the Ctrl/Cmd/Alt chords are left free for a consumer to
bind to running the tool. Clicking the button still only enlarges.
Signed-off-by: cliffhall <cliff@futurescale.com>
- rootUnion: decline a schema carrying BOTH oneOf and anyOf rather than
reading one and silently dropping the other's constraints.
- SchemaForm: handle `const` before every type dispatch and for every
constant type, so a numeric/boolean constant, or a schema carrying both
`const` and `enum`, can no longer offer a forbidden value.
- collectSchemaDefaults / TUI initialValue: `const` outranks `default`,
which is an annotation a schema may set to something its const rejects.
- convertToolParameters: resolve from the first branch's merged schema, so a
branch's specialization of a root-declared property is what types the arg.
- TUI: ink-form keys values by field name across the whole form, so two
branches' `kind` were one field and the later section's initial value
decided what the earlier submitted. Branch fields now render under prefixed
names behind a Variant select, and decodeFormValues translates back on
submit, dropping every branch but the chosen one.
Signed-off-by: cliffhall <cliff@futurescale.com>
A tool's `inputSchema` may carry composition keywords at its root — the
2026-07-28 revision makes this explicit — but both form builders enumerate
the root's `properties` and nothing else. A schema keeping its fields on
`allOf`/`oneOf`/`anyOf` branches therefore rendered no controls at all: no
branch picker, no fields, not even the raw-JSON fallback a union-typed
*property* falls back to, so the tool could only be called with empty
arguments.
Adds `core/json/rootUnion.ts`, one flattening shared by all three clients so
they cannot drift on which schemas they can render:
- `allOf` is merged unconditionally (conjunctive — there is no choice to
present), a root `oneOf`/`anyOf` is returned as branches.
- Web `SchemaForm` renders a Variant picker above the fields and prunes the
outgoing branch's values on a switch, since they are no longer visible and
would describe a shape the call is not making.
- TUI `schemaToForm` gives each branch its own section with optional fields —
ink-form is static, and only one alternative applies to a call.
- `convertToolParameters` looks through the branches, so a CLI `--tool-arg`
is typed by the schema that declares it rather than sent as a string.
Required-field gating asks whether *any* branch is satisfied, which is
selection-independent and never blocks arguments the schema accepts. A
`const` is seeded like a `default` and rendered read-only: it admits exactly
one value, so anything else the user could type produces a rejected call.
Adds a `root-union-schemas-http.json` showcase server.
Closes#2123
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot review round 5.
- The sidebar tooltip applied `hasError` to the TOTAL, so a tool with one
error and three warnings announced as "4 schema portability errors" —
a defect the previous round introduced while adding that wording, and
worse than the vague text it replaced. Both the tooltip and the
accessible label now carry the breakdown, formatted by a new shared
`summarizeToolFindings` so the fourth place to phrase a severity count
cannot drift from the other three.
- Suppress `remote-ref` when the document declares an `$id` anywhere.
`$id` establishes a base URI, so with a root `$id` of
`https://example.com/root` the ref `https://example.com/root#/$defs/x`
resolves to THIS document and needs no fetch — the finding and its
"inline the referenced schema" remediation would both be wrong.
Classifying correctly needs full RFC 3986 resolution against nested
embedded resources, which this module does not do, so it declines
rather than guessing. A missed finding is the acceptable direction.
- Run the `--strict` validations before every short-circuit return.
`servers/list`, `servers/show`, `--list-stored-auth` and
`--print-handoff` all return from `parseArgs` before any connect, so
the checks further down let `--strict --method servers/list` succeed
while silently ignoring a tools/list-only flag.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UL9retfvAXRgvi6EWk4SY4
Signed-off-by: cliffhall <cliff@futurescale.com>
