The network tracker wrapped the auth-challenge interceptor, so a 401/403
never reached it as a response: the interceptor cancelled the body and
threw, and the tracker logged only the thrown error. NetworkEntry renders
its response section only when a status is present, so the body — and the
WWW-Authenticate resource_metadata and scope — were never shown.
Move the tracker below the interceptor so it records the real response and
clones its body before the interceptor cancels it, and stop awaiting that
cancel: with the tracker's clone as the other tee branch, the cancel settles
only once the clone reads to the end, which would hang on an unending body.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SG6q6YEDJyJB5H2Hr8nBDS
Signed-off-by: cliffhall <cliff@futurescale.com>
- progressTokenOf now delegates to the SDK's ProgressTokenSchema instead of a
bare typeof check, so fractional and past-MAX_SAFE_INTEGER numbers are
rejected (matching isProgressToken in inspectorClient.ts); tests cover both.
- Browser relay timeout tests use fake timers with advanceTimersByTimeAsync and
flush the SSE consumer between pushes, replacing real-sleep windows that a
loaded runner could race (#1596).
- The log-only timeout test holds and awaits its rejection rather than
swallowing it in an empty catch.
- progressToken.test.ts gains a file header; the remote-session malformed-token
fixture uses a single-cast helper instead of `as unknown as`.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsmUAZ6aLUAFqenjJKSSRp
Signed-off-by: cliffhall <cliff@futurescale.com>
- Assert headersToServerSettings carries DEFAULT_CONNECTION_TIMEOUT_MS.
- Type the fake transports in inspectorClient.test.ts as the SDK's
Transport via two helpers instead of an as-unknown-as double cast; the
two pre-existing copies of the same fakes in that describe block use the
helpers too.
- Bring serverList.ts's converter comments and specification/v2_servers_file.md
in line with the new contract: 30 s default, explicit 0 persisted, and
requestTimeout's 0 unchanged.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01M4h8Xa6Ed9zwtv5ojX35MT
Signed-off-by: cliffhall <cliff@futurescale.com>
The web client drives its MCP Client through a two-hop relay
(RemoteClientTransport -> Node backend -> upstream transport). The relay
added two request-response waits that the direct transports don't have —
the backend's RemoteSession.waitForRequestResponse and the browser's
RemoteClientTransport.waitForSseResponse — and both were hardcoded to 60s
and blind to notifications/progress. The SDK Client's own request timeout
resets on progress (resetTimeoutOnProgress, which the Inspector enables),
but the relay's progress-blind waits fire first and shadow it, so a
long-running tool that reports progress is cancelled at 60s on the web
client alone while it completes over the CLI/TUI and other MCP clients.
Reset both relay waits on a notifications/progress whose progressToken
matches the pending request id, mirroring the SDK's resetTimeoutOnProgress.
A shared browser-safe progressTokenOf helper extracts the token. Log
messages (notifications/message, i.e. ctx.info) deliberately do not reset
the deadline, matching the SDK and every other client.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsmUAZ6aLUAFqenjJKSSRp
Signed-off-by: cliffhall <cliff@futurescale.com>
connectionTimeout defaulted to 0, which InspectorClient.connect() read as
"no bound at all" — so out of the box nothing the Inspector owns bounded a
connect attempt, and the only thing ending a hung handshake was the SDK's
60 s per-request timeout on initialize, reporting "Request timed out".
- Add DEFAULT_CONNECTION_TIMEOUT_MS (30000) to core/mcp/types.ts. An absent
value resolves to it on the client, on disk read, in the web form draft,
and in the CLI's header-only settings shell. An explicit 0 keeps its
documented meaning (no timeout; --connect-timeout 0) and is now persisted
so the opt-out round-trips; the default is the omit-sentinel, as for
taskTtl.
- Key the post-timeout transport teardown to the timer actually firing, not
to connectionTimeout > 0 — otherwise a non-zero default would tear down
every failed connect, including a recoverable 401 whose transport the
auth recovery holds open.
- The timeout message names the bound and where to raise it: "Connection
timed out after N ms. To accommodate a slower server, you may increase
the timeout value in Server Settings."
- The CLI's UNREACHABLE classifier now matches that message.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01M4h8Xa6Ed9zwtv5ojX35MT
Signed-off-by: cliffhall <cliff@futurescale.com>
Every site tagged `ext-apps#702` carried a workaround for ext-apps
peering on the v1 SDK while the Inspector runs v2. With 2.0.0 the
package's `AppBridge` extends the v2 `Protocol`, takes the v2 `Client`
and `Implementation` directly, and registers its list-changed forwarding
on that client with `setNotificationHandler("notifications/…", handler)`,
so:
- core/mcp/apps.ts: `getToolUiResourceUri(tool)` takes the v2 `Tool`
without a cast; `UiMetaShape` is replaced by ext-apps' own
`McpUiToolMeta` / `McpUiResourceMeta`, which resolve under NodeNext
since ext-apps#705. `AppInfo.csp` / `.permissions` / `.visibility`
take the named types too.
- core/mcp/inspectorClient.ts: `getAppRendererClient()` returns the SDK
client itself; the Proxy that translated the 1.x schema-first
`setNotificationHandler(Schema, handler)` into the method-string form,
its `notificationMethodFromSchema` helper and its cached field are
gone. `AppRendererClient` is now `Client` rather than `unknown`.
- createAppBridgeFactory.ts: `new AppBridge(client, HOST_INFO, …)` with
no `as unknown as`; `resolveSourceUri` passes the tool straight through.
- AppRenderer.tsx: `sendToolResult(result)` — its params ARE the v2
`CallToolResult` now.
- requestAppElicitation.ts: the double cast on the `elicitation/create`
send goes too — v2 `Protocol.request` takes the standard `Request`
shape, which `ElicitRequest` is. The helper itself stays: ext-apps#733
is not in 2.0.0.
- core/mcp/extensions.ts: `MCP_APP_MIME_TYPE` re-exports ext-apps'
`RESOURCE_MIME_TYPE` from `/app-bridge`; `UI_EXTENSION_KEY` stays
hardcoded because `EXTENSION_ID` is still `/server`-only in 2.0.0.
Tests: the Proxy-translation test is removed with the Proxy; the
`getAppRendererClient` tests assert the real `Client` instance and that
disconnect withdraws it; the `useInspectorClient` sentinel is a real
(unconnected) `Client`. Comments that cited ext-apps 1.7.5 now cite 2.0.0
where the fact still holds (#733 still unreleased).
Closes#1745
Refs #2309
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsmUAZ6aLUAFqenjJKSSRp
Signed-off-by: cliffhall <cliff@futurescale.com>
The storybook project's optimizeDeps now comes from
`getStorybookOptimizeDeps()` in `vite-base-config.ts`, beside the dev-server
helper it mirrors, so the `force` flag and the base include/exclude it carries
are asserted by `vite-base-config.test.ts` rather than living only in an
inline object a config refactor could drop.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsmUAZ6aLUAFqenjJKSSRp
Signed-off-by: cliffhall <cliff@futurescale.com>
No inline comments this round; all four came from the suppressed block.
The AppRenderer one is a regression I introduced by combining two changes that
were individually right. #2323 deleted that `waitFor`'s `{ timeout: 5000 }` as a
budget nested inside an equal one, which it was — and then round 2 pinned
asyncUtilTimeout at 1000, which is the exact default the site's own comment
records failing twice. The raise is restored: the enclosing budget is 15000 now,
so it is observable rather than unwinnable, and the value it beats is a measured
failure rather than a library default.
The guard could approve a configure() imported from the wrong Testing Library
copy — `cleanup` from @testing-library/react and `configure` from
@testing-library/dom satisfied two independent regexes while configuring a copy
no test calls. It now resolves the binding `configure` has in the import from
the required module, follows an alias, and reads asyncUtilTimeout out of that
call rather than out of the file. Three regression tests, including the split
import and a decoy constant elsewhere in the module.
secret-store-selection's 60s exception is hoisted to
LOCK_RETRIES_EXHAUSTED_MS, matching file-lock.test.ts, which bounds the same
wait — the new rule asks for named as well as justified.
And the testing skill still prescribed `HEADER_ANIM_MS + 200`, so a test written
by following it would have bypassed the shared slack constant this change
introduced. It now prescribes `HEADER_ANIM_MS + RAF_SLACK_MS` and says why the
two terms are separate.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsmUAZ6aLUAFqenjJKSSRp
Signed-off-by: cliffhall <cliff@futurescale.com>
The inline finding was a real bug: main() never called the discovery check, so
the deny-by-default claim rested on test:scripts happening to run the same
comparison — a different command, which `npm run verify:test-timeouts` does not
invoke. `failures` is now seeded from it, and a probe config under clients/ was
observed to fail the guard.
Three suppressed findings, all correct. The afterEach in oauth-interactive
restated the shared hookTimeout and labelled it as a round trip, when it only
stops a server and unlinks a file; it now carries no budget. The file-lock
constants were named for the opposite of what they bound — 90s covers retries
running out against a holder that never yields, 60s covers the stale-lock
takeover that succeeds — so they are LOCK_RETRIES_EXHAUSTED_MS and
STALE_LOCK_TAKEOVER_MS. The browser-timeouts header said 15 budgets; it is 19.
Separately, and more importantly: the asyncUtilTimeout raise is reverted, on
measurement. Verifying round 2 turned up intermittent 15s timeouts across
unrelated unit files, so three arms of three full unit runs were taken in this
worktree at comparable load — unmodified v2/main 3/3 green, this change with
5000 producing 1, 4 and 0 timing-out files, and the same change with that one
line reverted 3/3 green. A wait that is MEANT to expire spends its whole budget
on the happy path, so a 5x raise is a 5x cost on exactly those tests and
saturates the worker pool, starving tests that were never slow.
Both web setup files therefore state asyncUtilTimeout at the library's own
value rather than raising it, which is what #2323's rule actually asks for: a
budget nobody chose is the defect, not a budget that is small. The tests that
assert absence by letting a wait expire are the real problem and are #2335.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsmUAZ6aLUAFqenjJKSSRp
Signed-off-by: cliffhall <cliff@futurescale.com>
Three of the six Vitest projects ran on Vitest's own testTimeout: 5000 and
five on its hookTimeout/teardownTimeout: 10000, and all 788 Testing Library
waits in the web unit project ran on asyncUtilTimeout: 1000. None of those
numbers was chosen here, and all of them were sized for an idle machine rather
than for three or four concurrent worktree sessions each running a full
local:gate on eight cores. #2292, #2278, #2250, #1942 and #1742 were each that
class, diagnosed one site at a time.
This is the complement of #1596, not a retreat from it: every fix that issue
produced stands, and no race is hidden here. What changes is that a correct,
deterministic test is no longer cut off by a budget nobody picked.
- vitest.shared.mts exports frozen TIMEOUTS / INTEGRATION_TIMEOUTS; all six
projects spread one of them, clients/launcher importing the shared module for
the first time to do so.
- Both web projects configure Testing Library's asyncUtilTimeout. The storybook
one needs its own setup file, deliberately outside .storybook/ and free of
setProjectAnnotations so the automatic preview-annotation provisioning
(#1898) is untouched.
- 28 per-suite restatements of the integration project's own budget are gone,
so raising the shared value now moves every site under it. The handful that
genuinely differ — cross-process lock contention, a full OAuth round trip —
keep their budget as a named constant that says why.
- AppRenderer's waitFor no longer asks for exactly its enclosing budget, which
it could never win (#2292's shape); cli's e2e child timer drops below the
project budget so the bound carrying the diagnostic is the one that fires.
- The transition auto-settle's slack term is named RAF_SLACK_MS and raised;
the term derived from HEADER_ANIM_MS is untouched. The two answer to
different things and must not be scaled as one number.
- The 19 Playwright budgets scattered across three web smokes become four
named constants in scripts/lib/browser-timeouts.mjs.
scripts/verify-test-timeouts.mjs resolves each project through Vitest itself
and asserts the budgets, the asyncUtilTimeout sites, and that retry stays
unset. It was observed red against the pre-change config: unit/tui/launcher at
testTimeout 5000, five projects at hookTimeout 10000, both asyncUtilTimeout
sites unmet.
Closes#2323
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsmUAZ6aLUAFqenjJKSSRp
Signed-off-by: cliffhall <cliff@futurescale.com>
Third and last site of the same class. `ReadableStream.cancel()` adopts
the underlying source's cancel promise, which is permitted never to
settle, so awaiting it kept the handler pending forever — and on an
unbounded request there is no timer to release it either. The cancel is
started and the handler returns, so the JSON response and the `finally`
complete regardless.
The `void` carries the justification for which of AGENTS.md's permitted
cases it is: the callee owns its failures through its own `catch`, and
the caller cannot await.
Test: a `/stream-hostile` upstream that sends event-stream headers and
one frame and then never closes, asserting the route still answers 200
with no body.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01YFnM6RqB4nXqNysgUYmjmq
Signed-off-by: cliffhall <cliff@futurescale.com>
The exemption was URL-only, so an authorization server configured at
the MCP endpoint's own URL — `oauthTokenUrl` takes any absolute URL —
made the transport-internal refresh take the exempt branch and run with
no signal, no body buffering and no deadline. That is the one request
this change exists to bound.
`isExempt` now receives the request's headers as well as its URL, and
`exemptMcpEndpoint` refuses to exempt anything sent as
`application/x-www-form-urlencoded`, before any URL comparison. That is
a discriminator rather than a heuristic: the token exchange, the
refresh and revocation are all form-encoded per RFC 6749 §4.1.3 and RFC
7009 §2.1, and MCP is JSON-RPC over application/json and never is.
Also records, on the no-deadline route test, what it does not catch: at
a 400ms wait an unconditional timer restored at the production 30s
budget would still leave the request pending and the test would pass.
Catching that needs either a ~31s wait on every CI run or a route-level
deadline knob existing only for the test, and a second source of truth
for the deadline is the defect round 13 removed.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01YFnM6RqB4nXqNysgUYmjmq
Signed-off-by: cliffhall <cliff@futurescale.com>
Two real bugs and two stale rationales.
The OIDC fallback probes were issued with `{ headers }` and no signal,
so a caller that aborted after the initial 404 got a timeout reported
in place of its own cancellation, while the probe ran on to its own
deadline. The probes now carry the caller's signal — via the shared
`callerSignalOf`, so the precedence rule has one definition — a
pre-aborted caller is not probed at all, and an abort is rethrown
rather than folded back into the preceding response.
`Math.max(0, Math.round(timeoutMs))` let NaN and Infinity through.
`setTimeout(fn, NaN)` fires immediately, and a delay above 2**31-1
overflows a 32-bit signed int and falls back to 1ms — so a caller
asking for a very large budget, or one whose arithmetic produced NaN,
got an immediate OAuth timeout. `normalizeBudget` falls back to the
default on non-finite and clamps to the timer's range; the route's
envelope-supplied deadline gets the same clamp, but ignores a
non-finite value outright since a malformed deadline reads safest as
no deadline.
The wire-marker docblock and the matching route test still said a
backend deadline is the only one on the transport-internal discovery
path, which round 11 changed. Both now give the real reason the marker
matters: both ends run the same budget, and it is the backend winning
the race — a backgrounded tab throttling setTimeout — that must not
decide whether the error names its endpoint.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01YFnM6RqB4nXqNysgUYmjmq
Signed-off-by: cliffhall <cliff@futurescale.com>
The server-side timer added in round 9 applied to every /api/fetch
request. But that route carries MCP traffic as well as OAuth work, so a
Streamable HTTP tool call that legitimately withholds its response
headers past the budget was aborted there — reintroducing on the
backend exactly the regression exemptMcpEndpoint prevents on the
client, and reporting it as an OAuth timeout besides.
The caller now decides. `withOAuthRequestTimeout` stamps its budget on
the RequestInit it hands down, `createRemoteFetch` reads it back and
puts it in the /api/fetch envelope, and the route applies a timer only
when one is present — so an exempt MCP request, which never gets an
init of its own, is bounded by nothing.
The carrier is a WeakMap keyed on the init rather than a header:
serializeRequest copies request headers verbatim into the payload and
the route re-sends them to the authorization server, so a marker header
would leak to a third party. It needs no cast onto RequestInit and is
collected with the object.
The `fetchTimeoutMs` option from round 9 is gone — the deadline now
lives in exactly one place, the client wrapper, which is also what
makes the 504 marker honest: only a request the OAuth wrapper bounded
can produce one.
Ten tests: the stamping and its rounding, nothing stamped on an exempt
call or an init that never went through the wrapper, the envelope
carrying the budget (and not a header), its omission on both exempt and
direct calls, and at the route the 504 marker, no deadline without one,
and a non-numeric deadline ignored. The no-deadline case is verified by
mutation: an unconditional timer makes it fail.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01YFnM6RqB4nXqNysgUYmjmq
Signed-off-by: cliffhall <cliff@futurescale.com>
A deadline enforced by the backend could not arrive as an
OAuthRequestTimeoutError: /api/fetch serialized it as a 500 and
createRemoteFetch turned that into a plain Error, so every instanceof
check downstream was false — including the one that lets a stalled
probe escape withRfc8414OidcCompat. That matters most where no
client-side wrapper exists to have fired first: the discovery the SDK
runs from inside the transport. The route now answers 504 with a typed
marker (OAUTH_TIMEOUT_WIRE_CODE plus url and timeoutMs) and
createRemoteFetch reconstructs the error from it, guarded by a shape
check so an upstream's own JSON cannot forge one.
The route's deadline becomes a `fetchTimeoutMs` option defaulting to
the shared constant, so the backstop can be proven to fire in
milliseconds instead of thirty seconds of wall clock — and because a
very slow authorization server is a legitimate reason to want a longer
one.
The rounding rationale was wrong: setTimeout accepts a fractional delay
and truncates it (verified on Node 26); ERR_OUT_OF_RANGE is
AbortSignal.timeout's behaviour, which this wrapper never calls. The
rounding stays, for the reason that is actually true — the budget is
interpolated into the message and exposed as timeoutMs, and a
performance.now() budget would otherwise report 1000.4000000953674ms.
Also drops a sentence in the discarded-stream test that contradicted
the qualification above it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01YFnM6RqB4nXqNysgUYmjmq
Signed-off-by: cliffhall <cliff@futurescale.com>
The /api/fetch route classifies an event-stream or NDJSON response as a
stream and then answers with JSON and no body — so nobody downstream
owns the upstream stream and nothing will ever read it, while the
`finally` clears the only deadline on the way out. It is now cancelled
explicitly, best-effort, the way `releaseBody` in oidcDiscoveryCompat
already does. Measured, undici reclaims an unread body here on its own,
so this is belt and braces rather than a demonstrated leak — kept
because relying on that is an implementation detail of the fetch
beneath us, not a contract. The route test and the source comment both
say so rather than implying a stronger claim.
Forwarding the signal also made revocation.ts's rationale stale: it
still described a proxy that drops `init.signal` and a backend that
cannot cancel. Both comments there, and the matching one in
revocation.test.ts, now describe the post-#2319 path — the signal
cancels, the race guarantees, and what the race is still for.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01YFnM6RqB4nXqNysgUYmjmq
Signed-off-by: cliffhall <cliff@futurescale.com>
Three findings, all real.
`arrayBuffer()` hands back the decoded entity body, so the rebuilt
response was carrying the upstream `content-encoding` and the
compressed `content-length` — a gzipped metadata document came back as
plain JSON bytes still claiming gzip and the wrong size, visible in the
Network capture. Both headers are deleted now, as `responseWithBody` in
endpointOverrides.ts already did for the same reason.
The "why a race, and not just the signal" rationale described a world
this PR had since changed: the signal does now reach the backend's
outbound fetch. The module doc and three implementation comments are
rewritten to say what the race is actually still for — a fetchFn that
ignores AbortSignal, and a backend that is itself wedged — rather than
a proxy hop that no longer drops it.
The backend cancellation path had only mock-level coverage. A
route-level test drives /api/fetch at an upstream that accepts and never
answers, aborts the browser side, and asserts the upstream observes its
connection closing. Verified by mutation: dropping `signal` from the
route's outbound fetch makes it time out rather than pass.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01YFnM6RqB4nXqNysgUYmjmq
Signed-off-by: cliffhall <cliff@futurescale.com>
`getCimdClientMetadataUrlError` rejected every non-HTTPS CIMD client metadata
URL with no loopback exemption, and the same check runs against `client.json`
on disk through `refineCimdMetadataUrl`, so it could not be worked around by
hand-editing the file either. Every test server in this repo speaks plain HTTP,
so CIMD could not be driven against any local fixture: #2242 shipped verified by
tests alone, and reproducing it by hand meant standing up a self-signed HTTPS
listener plus `NODE_TLS_REJECT_UNAUTHORIZED=0` in the test server's environment.
Accept plain `http:` on the three literals the SDK itself exempts from its
token-endpoint TLS assertion — `localhost`, `127.0.0.1` and `[::1]`. That is
option 1 in #2305 and matches what the runtime already tolerated:
`core/auth/cimd.ts` notes that an already-stored `client_id` may be an `http://`
URL used by local dev/test metadata servers. Anything outside those three,
`localhost.` and `tenant.app.localhost` included, is still rejected — matching
the SDK literal for literal keeps the two allow-lists from disagreeing about one
URL.
The exemption is a literal set rather than `isLoopbackHost` because
`core/client/config-parse.ts` is browser-safe and `core/node/hostUrl.ts` imports
`node:net`.
The field error now names the exemption instead of saying only "must use
HTTPS", and the form's hint and description say the same, so a developer
pointing the field at a local fixture is told which spellings work.
Closes#2305
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GfHQ8vMm5NBgzbUJ6UwxmB
Signed-off-by: cliffhall <cliff@futurescale.com>
Validate `oauth.clientMetadataPath` the way the other two metadata paths
are validated — in `loadConfig` for the JSON route and again at server
setup for a `ServerConfig` built in code. This path is not merely
advertised: it becomes the served document's own `client_id`, so an
off-origin or query-bearing value would publish a client id this server
cannot honour.
Derive that `client_id` from `req.originalUrl` rather than from the
registered route, so a document fetched with a query string answers with
a `client_id` byte-identical to the URL it was fetched from — the
equality CIMD turns on.
Correct the docs' fixed-port warning: this fixture configures no
`issuerUrl` and derives the `client_id` from the request, which is
exactly why the integration test can drive it on a harness-chosen port.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UWGH2ytPzSPxnp4cibaV3Z
Signed-off-by: cliffhall <cliff@futurescale.com>
In CIMD (SEP-991) the `client_id` *is* a URL the authorization server
dereferences to learn the client's metadata. Nothing in this repo served such a
document, so a fixture could advertise `client_id_metadata_document_supported`
and still be unusable — exercising CIMD meant standing up a second host by hand.
That is why #2242 shipped verified by its tests alone, and why the v2.6.0
release smoke recorded it as the one contribution with an observable UI surface
that could not be reached.
The composable server now hosts the document itself when `oauth.clientMetadata`
is set, gated on `supportCIMD` — advertising a client the server would then
refuse to honour is a worse fixture than serving nothing. The document's
`client_id` is derived from the **request** rather than from a configured
issuer, so it stays correct when the harness picks the port, as the integration
test does.
`supportDCR: false` in the fixture is load-bearing rather than incidental. With
DCR available a CIMD failure silently succeeds via dynamic registration and the
reproduction proves nothing — during development a misconfigured run connected
happily and reported `Dynamic (DCR)` with a `test_client_…` id, which reads as
success until you check the client id. With DCR off, CIMD is the only path that
can complete, so reaching a connected state is itself the assertion; the test
pins the absent `registration_endpoint` so it stays that way.
Verified end to end against the fixture: Connection Info read
`Client registration — Client ID Metadata (CIMD)` with the client id equal to
the metadata URL. That drive needed a self-signed HTTPS listener, because the
Inspector requires the CIMD metadata URL to be HTTPS with no loopback
exemption — filed separately as #2305, since it is a validation gap rather than
a fixture one.
Closes#2306
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RsmR1iQstcrEzJFmgZXGLi
Signed-off-by: cliffhall <cliff@futurescale.com>
SEP-2640: hosts MUST NOT assume name uniqueness, and when two entries in one
listing collide on `name` a host MUST disambiguate them rather than silently
discarding or preferring one.
`checkSkillConformance` structurally cannot see this — it takes one entry and
a collision is a property of the pair — so `checkSkillNameCollisions` walks
the listing and returns a finding per colliding entry, each naming the
others. All three clients merge it into the entry's own findings, so it
carries through the header badge, the CLI report and the TUI row marks with
no new surface.
**It is a `warning`, not an `error`,** and that is the severity split doing
its job. The obligation is on the *consumer*: a server may legitimately
publish two skills with the same name under different paths, and the SEP's
own `acme/billing/refunds` example is exactly that shape. Calling it an error
would tell a conforming author their catalog is invalid. `--verify` therefore
still exits 0 for a collision.
In the web screen it renders as a banner directly under the Conformance
header and is filtered out of the findings list, the same treatment
`dynamic-resources` gets: it changes how everything below it should be read,
and stating one fact twice reads as two findings.
Fixed while adding it: an entry whose only finding was a banner one rendered
an EMPTY findings container instead of "no structural issues", because the
list's presence was decided on the unfiltered set while its contents were
filtered. `listedIssues` is now derived once and used for both.
The fixture gains `acme/reports` + `globex/reports`, both fully conforming
and sharing the name `reports` — also the only fixture with a multi-segment
skill path, which nothing else exercised. Eight skills over four pages now,
and the integration test walks the cursor to exhaustion rather than asserting
a fixed page count, so a future fixture does not require editing it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01ND46Ci64DC3tzBy9aG81Nc
Signed-off-by: cliffhall <cliff@futurescale.com>
Five findings, all real.
**Critical — `verifySkills` selected `contents[0]`.** These bytes are hashed
against the file's advertised digest, so accepting a block the server
labelled something else verifies one file's content against another file's
digest, and can report that as `verified`. A false pass is worse than a
missing check. `contentsFor(result, uri)` now selects by NORMALIZED identity,
which keeps the canonicalized-echo case that motivated the original code
while rejecting an unrelated block, and reports a read error when nothing
answers for the URI. This is what `onReadSkillFile` already did; the two
paths hash bytes against digests and must not disagree about which bytes.
**`skills/get` was dispatched without the extension gate** that `skills/list`
had. Hoisted into `assertSkillsSupported` so the two cannot drift — declaring
the extension commits a server to both. Without it, an undeclared server's
-32601 is indistinguishable to a script from the -32602 a declared server
returns for a URI it does not serve.
**The TUI could strand a user on a hidden Skills tab.** The tab left the bar
when the gate went false but `activeTab` did not, so the pane kept rendering
for a server that never declared the extension. Reset to `info`, following
the Auth precedent — additionally gated on `connected`, because this gate
reads a server declaration and would otherwise fire during a reconnect.
**The TUI keyed a verdict by URI**, so a refresh replacing the manifest under
the same URI left hashes computed for the previous snapshot describing the
new one. Keyed on the entry now, as the web screen already was.
**A failed "Load more" discarded the pages on screen and the retry cursor.**
Both are preserved now, and the success and failure paths share one
staleness-guarded `commit` helper so they cannot drift on which results they
may write — which is how they came to disagree.
Two nits: the six-skill counts. The docs sentence was more wrong than
reported (five awkward skills of six, three outright violations) and is
rewritten rather than renumbered.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01ND46Ci64DC3tzBy9aG81Nc
Signed-off-by: cliffhall <cliff@futurescale.com>
Closes#2248.
Completes SEP-2640 support across all three clients, and closes the one
obligation #2234 deliberately left open.
- `checkSkillFrontmatterMatch` compares a served SKILL.md's own YAML
frontmatter against the entry the listing advertised, field by field. No
digest can cover this: a digest is taken over the bytes the server served,
so it proves the file was not altered in transit and says nothing about
whether the listing described it honestly. Needs a real YAML parser; `yaml`
was already a root dependency, so this adds no package — but it does newly
put it on core/'s import graph, hence the three bundler `external` lists.
- `resources/directory/read`: result schemas defined against the normative
text, `InspectorClient.readResourceDirectory`, a Directory section on the
Skills screen, and `--method resources/directory/read` in the CLI. The
client refuses the call locally when the server did not declare
`directoryRead`, which is the SEP's MUST NOT. A child the directory lists
but the entry does not is marked `not listed` rather than merged into the
manifest — the SEP calls a directory result a live observation and forbids
treating it as extending the manifest.
- CLI: `skills/list`, `skills/get` and `resources/directory/read`, plus
`--verify` — one NDJSON report per skill, a summary on stderr, exit 7 on a
violation. Reads are sequential; a conforming manifest may declare 512
entries.
- TUI: a Skills pane, shown only when the server declares the extension. Each
row carries its conformance verdict as a glyph as well as a colour, since
the pane is read over ssh and through script(1). Enter verifies.
- `verifySkills` re-throws `AuthRecoveryRequiredError` rather than recording
it per file: it says the session's authorization expired, so absorbing it
would report N identical read failures and swallow the error the TUI and
the web commands key off to reauthorize.
Two open questions settled, both in code comments where they will be found:
`skills/get` carries no caching attributes because SEP-2640 leaves the
question open in as many words, so requiring them would fail a conforming
server; and there is no `PagedSkillsState` because every consumer of this
list is a whole-catalog verdict — computed over page one of three, "this
server's skills conform" is not merely partial but wrong.
The fixture grows two skills, both for checks that were otherwise
undemonstrable: `lying-listing` (listing and file disagree, digest still
verifies) and `stale-manifest` (serves a file its manifest does not declare).
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01ND46Ci64DC3tzBy9aG81Nc
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot review (#2287): the CIMD E2E assertion had gone vacuous. Once the
pre-registration started writing the issuer-keyed slot itself, the SDK found an
already-stamped credential and never called `saveClientInformation` at all — so
the assertion held even with the resolver gutted. Verified: reverting the
dispatch to `: "dcr"` left all 34 tests passing.
Add a case that seeds the legacy *unkeyed* CIMD registration — what every
pre-SEP-2352 install has on disk, and the exact shape #2242 was reported
against. The SDK back-stamps it with the issuer, which is the save that used to
relabel it `Dynamic (DCR)`, so the resolver is genuinely on the path.
That case now fails on both SSE and Streamable HTTP when the dispatch is
reverted, which is the reported bug reproduced across the integration boundary.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Lmj6X2epWpPE7ScdSKQmtA
Signed-off-by: cliffhall <cliff@futurescale.com>
`BaseOAuthClientProvider.saveClientInformation` treated every save without an
explicit `registrationKind` as DCR. The SDK reaches it from three places in
`auth()` and only one is a dynamic registration, so the issuer-binding write
overwrote the `cimd` provenance our own pre-registration had just stored — and
Connection Info reported `Dynamic (DCR)` for a connection that never issued a
`POST /oauth/register`.
Recover the kind instead: a `client_id` equal to the configured
`clientMetadataUrl` is CIMD (which also covers the SDK's own CIMD write), and
otherwise a stored registration with the same `client_id` carries its recorded
kind forward. Matching on `client_id` keeps stale CIMD provenance from leaking
onto a later DCR registration for the same server.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Lmj6X2epWpPE7ScdSKQmtA
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot on #2281: the option's contract said an unregistered URI is ignored,
but `withDuplicateResources` runs on the assembled list, which also carries
whatever a resource template's `list` callback contributed — so a
template-listed URI was duplicated in contradiction of its own doc.
Broadened rather than restricted, because scoping it to `registeredResources`
would leave half the surface unreproducible: both kinds of entry land in the
same Resources sidebar list and collide on the same React key. The contract now
says so on `ServerConfig.duplicateResourceUris` and on the config-file mirror,
and an integration case covers a template-listed URI — it fails if the override
is narrowed to `state.registeredResources`.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018yVgAJz4wpkS4mkGk7DQnp
Signed-off-by: cliffhall <cliff@futurescale.com>
The Resources sidebar keyed every row on its `uri` (and templates on
`uriTemplate`), but nothing in MCP makes those unique — a server may return
the same URI twice, and `ManagedListState.applyItems` replaces the list
wholesale, so a repeat is what the server actually sent. React logged
`Encountered two children with the same key` on every render, and a
filtered-out row survived reconciliation instead of unmounting.
This is the resources counterpart of #1957. The row identity is now the same
`listRowKey(id, sourceIndex)` the Tools sidebar has used since then, extracted
so the two formats cannot drift; `toolRowKey` delegates to it. Applied to all
three Resources lists and to `RootsTable`, whose user-maintained list can
collect a duplicate URI the same way.
Selection stays keyed on the URI, deliberately: unlike a duplicated tool name
(#2001), duplicate rows here denote the same resource — a `resources/read`
takes the URI — so highlighting both is correct. Only the React key needs to
tell them apart.
Adds `ServerConfig.duplicateResourceUris` and the
`duplicate-resource-uris-http.json` showcase config, the `resources/list`
mirror of `duplicateToolNames`, so the defect has a fixture to reproduce it —
appended rather than adjacent, for the reason #1957 documented.
Closes#2206
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018yVgAJz4wpkS4mkGk7DQnp
Signed-off-by: cliffhall <cliff@futurescale.com>
An MCP cursor is an opaque string: the spec constrains neither its content
nor its length, so `""` is a `nextCursor` a server may legitimately return
and the client is required to send back verbatim.
`listPrompts`, `listResources`, `listResourceTemplates` and
`listRequestorTasks` built their request params with `cursor ? { cursor } : {}`,
a truthiness check that cannot distinguish "no cursor" from "the cursor is
the empty string". Against a server that paginates with `""` they dropped it
and re-requested page one — a list that silently stops at the first page, or
a walk that loops on it forever. Nothing surfaced an error, because the
request was well-formed; it just asked the wrong question. `listTools` (and
the later `listSkills`) already used `cursor !== undefined`; this brings the
other four into line.
`getReplayableParams` in `protocolReplay.ts` existed partly to mirror the
asymmetry — its `method === "tools/list" || params.cursor !== ""` special
case collapses to `typeof params.cursor === "string"` now that the adapters
agree, and its long comment is updated rather than left describing a state
that no longer exists.
Coverage:
- `inspectorClient-list-cursor.test.ts` asserts the outbound params of all
five adapters — `""` carried, an absent cursor sending no `cursor` key,
a non-empty cursor forwarded unchanged. `listTools` is the control.
- `test-servers/configs/empty-cursor-http.json` (`emptyStringCursor`) hands
out `""` as the cursor for page two, the shape no other fixture produces,
and `empty-cursor.test.ts` walks all three of its lists end to end.
- Removing the fix from any one adapter fails exactly its two cases.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EN2UfrkQZvtrviMtqURRm4
Signed-off-by: cliffhall <cliff@futurescale.com>
Round 16 reported no inline comments and three suppressed findings, all
valid:
- `getSkillsExtension` treated a non-object extension value (`false`,
`"skills"`) as a declaration. SEP-2133 declares an extension as an
object of sub-options, so a primitive is not one — now rejected,
matching `appElicitation.ts`.
- The `onGetSkill` prop doc claimed the two responses "must agree" and
that a difference means a broken server, contradicting the
implementation, which reports a difference as a finding rather than a
fault. Reworded to what the code does.
- No real-transport test exercised the fixture's `skills/*` handlers.
Added `src/test/integration/mcp/inspectorClient-skills.test.ts`,
parameterized over both protocol eras: capability advertisement, the
paged `skills/list` walk (direct and through `ManagedSkillsState`),
`skills/get`, the `-32602` for an unknown URI, `resources/read` of a
skill file, and delegation of an ordinary resource through the
fixture's `resources/read` wrapper.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018kfrH3uRNUM4JAk1reKtyY
Signed-off-by: cliffhall <cliff@futurescale.com>
#2222 reported that `core/auth/revocation.ts` breaks a client secret
containing `+`, on the basis that `encodeURIComponent` leaves `+` bare.
It does not — it escapes it as `%2B`. The characters it leaves bare are
exactly `!'()*-._~` and alphanumerics, every one of which a form-
urldecoder passes through unchanged, so its output decodes identically
under both algorithms; verified over every code point up to U+2FFF.
Switching to `URLSearchParams` would be the literal algorithm §2.3.1
names and a small regression: it encodes a space as `+`, which a lenient
server decoding with `decodeURIComponent` alone reads as a literal `+`,
while `%20` is understood by both. The encoder is therefore unchanged
and the reasoning is recorded on it.
The report's second half stands and is the real defect: the fixture
decoded with `decodeURIComponent`, the encoder's own inverse, so the
round trip succeeded for every input by construction and no test could
have failed on an encoding mistake. `/oauth/revoke` now runs a genuine
RFC 6749 Appendix B decode, with unit cases for `+`, a space, `:` and
`%` (asserted on the wire and through an independent decoder), an
end-to-end client whose secret is base64 with a `+` in it, and a guard
that an unencoded credential is refused — the case that separates the
two decoders.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BhVaufrEZAfFAXcg6456hK
Signed-off-by: cliffhall <cliff@futurescale.com>
The CI coverage job failed with `ReferenceError: sessionStorage is not defined`.
`revocation-e2e.test.ts` used `BrowserOAuthStorage`, but the `integration`
vitest project runs in the node environment, not happy-dom. Node 22 gates Web
Storage behind a flag while newer Node exposes it by default, so it passed
locally and failed in CI. It uses `NodeOAuthStorage` with a temp dir now,
matching the other OAuth integration tests, with a comment naming the trap.
Also from Copilot review round 21: `listIssuers` and `getIssuerTokens` became
dead production API when `takeRevocationSnapshot` took over — a grep finds them
only in their own implementations and tests. Keeping them would widen the
exported `OAuthStorage` contract and force every implementation and mock to
carry methods nothing calls. Removed, along with their tests and the mock
entries in four suites.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0177mPHAdECD18nLLCTwR5rh
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot review round 18. Three of its findings were the same check-then-act:
`planOAuthRevocation` is asynchronous, so the gap between its reads and the
following `storage.clear()` is still a window — shorter than the network one
closed in round 13, but the same shape. An OAuth completion landing at any of
those awaits saved a grant the clear then destroyed.
`OAuthStorage.takeRevocationSnapshot(serverUrl)` reads what revocation needs
and clears the server in ONE synchronous pass over the in-memory state, with
the persist after the mutation. `clearAndPlanRevocation` replaces
`planOAuthRevocation`, and there is no separate `clear` call left in any
caller — the clear cannot be forgotten or reordered.
The snapshot returns values unparsed, deliberately: schema validation is pure
and belongs after the mutation, since running it inside would reintroduce the
`await` this exists to remove.
Two consequences worth naming. A failure of the take-and-clear now REJECTS
rather than returning an outcome, because the state was not cleared and the
caller's contract is that it was; both clients already have a rejection path.
And cross-process atomicity is explicitly not claimed — nothing in this store
takes a lock, every mutation is a read-modify-write over a loaded snapshot, and
`clear` alone always had that property.
Also from round 18:
- The CLI's budget check ran before considering `plan.outcome`, so a key that
needed no network was reported as budget-exhausted — warning that a grant may
be live when that key held none.
- A disconnect failure after a successful clear was reported as "could not
clear OAuth state" in both clients. It now goes to the disconnect channel,
and the success is still reported.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0177mPHAdECD18nLLCTwR5rh
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot review round 15.
The issuer check still failed open for the legacy unkeyed grant. "Unkeyed"
means its authorization server is UNKNOWN, not that the cached endpoint is
proven to own it: server metadata is a single slot a later discovery
overwrites, while a pre-SEP-2352 token survives until the first issuer-stamped
save. So a clear could post an old bearer credential to an authorization server
that never minted it.
Such a grant is now cleared without being revoked, and reported as such with a
message saying re-authorizing makes future clears revocable. The cost is that
a pre-issuer-binding entry gets no revocation — which is exactly the behavior
it had before this feature existed, so nothing regresses — and it earns
revocation back on the next authorization. Not sending is the only answer that
cannot be wrong.
Every seed in the suite is now issuer-bound, which is what a real flow writes;
the two tests that were about the legacy grant now assert the refusal, since
that is the behavior worth pinning.
Also renamed the CLI test that still described the pre-round-13 ordering.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0177mPHAdECD18nLLCTwR5rh
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot review round 13. Three of its four findings were one root cause, and
it is a design flaw in the premise this PR started from.
Revoking *before* the clear meant the clear waited up to five seconds on the
network — and anything that wrote OAuth state in that window was then deleted
by a clear reasoning about the grant it replaced. A same-server reauthorization
in the TUI (whose Disconnect/Connect accelerators stay live), a stored-only web
clear for a server that becomes active mid-flight, and another CLI/TUI process
writing to the shared file-backed store all hit it.
`revokeStoredOAuthTokens` is therefore split into `planOAuthRevocation` and
`executeOAuthRevocation`, and every caller runs plan → `storage.clear()` →
execute. The snapshot still precedes the clear, because the store is where the
token, the credentials and the endpoint live; but the clear no longer waits on
anything. There is deliberately no single-call wrapper left, so no caller can
reintroduce the racy order by accident.
Fourth finding, same file: `handleConnect` now retires `clearOAuthAttemptRef`
alongside `disconnectAttemptRef`. The server-name check does not cover
disconnect/reconnect to the SAME server — the name still matches on the other
side of it — so a clear still in flight could tear down the session the connect
had just established.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0177mPHAdECD18nLLCTwR5rh
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot review round 3.
`clear(serverUrl)` deletes EVERY `byIssuer` slot, but revocation read only the
context-free (active-issuer) token. A server that had authorized against
issuers A and B therefore revoked B, then destroyed the local record of A while
A's grant stayed live at its authorization server — the same leak this feature
exists to close, one level down.
- `OAuthStorage.listIssuers(serverUrl)` is the new seam (one implementation:
every backend extends `OAuthStorageBase`). `collectGrants` walks it plus the
ctx-less read, deduping by token, so every grant the clear will delete is
covered.
- Metadata is cached once per server, not per issuer, so a grant bound to an
issuer the cached document does not describe cannot be revoked: sending its
token to that endpoint would hand a credential to a server that never minted
it. That grant is reported as failed — dropped unrevoked — rather than
silently discarded or misdirected.
- `aggregateOutcomes` gives a failure precedence over another grant's success,
so one live grant cannot hide behind another's 200. Exported for its own
test, since `computeOutcome` returns early on the empty case.
Also from that round:
- The fixture's /oauth/revoke now verifies token ownership (RFC 7009 §2.1).
Access tokens record their owning `client_id`; a token belonging to another
client is left alone and still answered 200 (§2.2 — the response must not
tell one client whether another's token exists). New e2e case proves a
second registered client cannot revoke the first's grant.
- The TUI rendered the revocation-failure note in cyan, the informational
tone. It is a partial success — the local clear really happened — so it is
not an `error` status, but the grant may still be live and cyan understated
that. `AuthTab` takes an `oauthMessageTone`; the message says so explicitly.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0177mPHAdECD18nLLCTwR5rh
Signed-off-by: cliffhall <cliff@futurescale.com>
Two more review findings, both real.
The shim wrapped `effectiveAuthFetch` only, but the transport is constructed
with the base `this.fetchFn`, and the SDK runs its own discovery from inside
the transport on the 401/refresh leg — so a reconnect with an existing auth
provider could still hit the upstream failure. It now wraps the base fetch,
the same seam `withOAuthEndpointOverrides` uses and the only one that reaches
both paths.
That trades away the previous claim that a captured Network entry shows the
real 404: below the trackers, what they record is the substitution. Rather
than leave that silently misleading, a substituted response now carries
`x-inspector-oauth-metadata-source` naming the URL its body was actually
fetched from — the transport builds its tracker internally, so there is no
seam above it to install into instead. An integration test captures the fetch
the transport is handed and drives it against a real server, since nothing
else proves that wiring.
The wrapper also keyed on URL shape alone, but nothing stops an authorization
or token endpoint from living under `/.well-known/oauth-authorization-server/`;
a POST there returning an ordinary OAuth 4xx would have had its error replaced
by a metadata document. Metadata discovery is a GET, so anything else is now
left alone.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UL9retfvAXRgvi6EWk4SY4
Signed-off-by: cliffhall <cliff@futurescale.com>
The two cancellation tests each built their own `slow_task`, so the
documented showcase — the config file, its preset registration, and the
fixture's own abort loop — was covered by nothing. A misspelt preset name
or a regression in that handler would have surfaced only when someone ran
the repro by hand.
Resolve `cancellation-modern-http.json` through `loadConfig`/`resolveConfig`
and drive the real preset, following the pattern the nullable-fields and
MRTR showcase tests already use.
It asserts on the handler's own return value rather than on progress
notifications. Counting ticks is a false negative here: the SDK drops a
cancelled request's progress handler locally, so the client stops seeing
ticks the moment it cancels whether or not the server ever stopped —
verified, that version passed with the fix reverted.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013hzwzS8UvBsr4yZm7o7sev
Signed-off-by: cliffhall <cliff@futurescale.com>
- RFC 8414 §2 defaults an omitted `revocation_endpoint_auth_methods_supported`
to `client_secret_basic`; it does not inherit the token endpoint's list.
Inheriting made metadata advertising only `client_secret_post` there send
POST credentials to an endpoint that never advertised the method.
- The 5s timeout was inert on the web paths: `createRemoteFetch` re-issues the
call as a POST to `/api/fetch` and drops `init.signal`, and the backend's
outbound fetch gets none either, so a wedged AS could hold the teardown open
indefinitely. A wall-clock race now enforces the deadline; the signal is kept
because it genuinely cancels the direct-fetch paths.
- The settings-modal Clear read `settingsModalTarget`, which comes from the
persisted `servers` list, while edits live in `settingsDraft` until the save
debounce. Toggling the checkbox and clearing immediately used the previous
value. It now merges the draft.
- `--relogin` clears both key spellings, so it now revokes from both rather
than stopping at the first populated one — a stale entry under the other
spelling is a live grant. The normalised key goes first, matching
`findStoredServerState`, and a second key holding the same token is skipped.
- The fixture's /oauth/revoke now ENFORCES RFC 7009 §2.1 client
authentication (both RFC 6749 §2.3.1 forms), so the e2e's claim that the
Inspector authenticates correctly is actually tested; two negative cases
assert a wrong secret and an unidentified client are refused.
- Dropped the `as unknown as` casts from the tests: a typed `InspectorLogger`
double, and a spy on the real storage instead of a spread-and-cast.
- Added CLI-level tests through `runCli` for `--no-revoke`, the per-server
`oauth.revokeOnClear`, and the stderr warning, and TUI tests for the
forwarded opt-out and the rendered failure.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0177mPHAdECD18nLLCTwR5rh
Signed-off-by: cliffhall <cliff@futurescale.com>
The Cancel button POSTed `notifications/cancelled` on every transport. On
a 2026-07-28 Streamable HTTP connection that is the wrong signal — the
spec makes closing the request's SSE response stream the cancellation
signal there and says the notification is neither required nor expected —
so a spec-compliant server acknowledged it 202 and dropped it while the
tool ran to completion.
The SDK already implements the fork, off `transport.hasPerRequestStream`.
Every Inspector connection is wrapped in `MessageTrackingTransport`, which
did not forward that flag, so the SDK read `undefined` and took the stdio
branch on every client — the CLI and TUI included, whose real
`StreamableHTTPClientTransport` advertises it correctly.
The web client needed three more links: its browser transport answers for
the upstream transport that lives on the backend, so it advertises the
flag for `streamable-http` and applies the SDK's `requestSignal` to its
`POST /api/mcp/send`; and `/api/mcp/send`, held open for the whole call,
forwards the browser's disconnect to the upstream `transport.send`.
The test fixture's `toWebRequest` built a Web Request with no `signal`, so
no fixture server could observe a disconnect at all — without that, a test
asserting the cancel reaches the server passes vacuously.
stdio and SSE keep `notifications/cancelled`: they multiplex every request
over one shared channel and have no per-request stream to close. So does
the legacy era, which predates the mechanism.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013hzwzS8UvBsr4yZm7o7sev
Signed-off-by: cliffhall <cliff@futurescale.com>
Clearing the Inspector's OAuth state deleted the local copy of the tokens
and stopped there. The access token — and the refresh token, which is
long-lived by design — stayed valid at the authorization server until they
expired on their own, so a day of connect/disconnect iteration left it
holding grants for sessions that ended hours ago. RFC 7009 §1 describes
exactly that case, and nothing in the repo constructed a revocation
request, so a server author implementing `revocation_endpoint` had no way
to exercise it with the tool that exists to exercise this.
core/auth/revocation.ts builds and sends the request; the three clear paths
call it, so the behavior is written once — web's "Clear OAuth state and
disconnect" (both the active and stored-only paths), the TUI's Auth tab,
and the CLI's --relogin. It runs BEFORE the local clear, because the token,
the client credentials and the discovered `revocation_endpoint` all live in
the store the clear is about to empty. The request names the refresh token
when there is one: §2.1 asks the AS to also invalidate the access tokens
issued under the same grant, so one request covers both halves.
Best-effort by construction. Every path returns a TokenRevocationOutcome
rather than throwing: no advertised endpoint means nothing is sent and that
authorization server behaves exactly as before, and a network error, a
non-2xx, a 5s timeout or an unreadable store is reported and nothing more.
Forgetting the tokens is what the user asked for. `lost_authorization_state`
recovery deliberately skips it — it clears a half-finished flow to retry it,
and an authorization that never completed has no grant to revoke.
Client authentication resolves the preregistered slot first, mirroring
BaseOAuthClientProvider.clientInformation; reading only the dynamic slot
would send no authentication for a server configured with `oauth.clientId`.
The Basic credential is byte-identical to the SDK's applyBasicAuth so this
request and the token request cannot present the same secret differently.
Opt out per server with `oauth.revokeOnClear` (default on, only `false`
written to disk) or per CLI run with --no-revoke. Read at clear time rather
than connect time, so toggling needs no reconnect. Turning it off is a
testing affordance: a client that walks away still holding live tokens is a
case a server author may want to reproduce.
test-servers now advertises `revocation_endpoint` and serves POST
/oauth/revoke, faithful on §2.2 (an unknown token is a success) and §2.1
(revoking a refresh token invalidates the access tokens under the same
grant), with oauth-revocation-http.json / oauth-no-revocation-http.json as
showcase configs.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0177mPHAdECD18nLLCTwR5rh
Signed-off-by: cliffhall <cliff@futurescale.com>
The SDK's `discoverAuthorizationServerMetadata` picks its validation schema
from the well-known filename that resolved rather than from the document that
came back, so anything found at `/.well-known/openid-configuration` is
validated as an OpenID provider document — requiring `jwks_uri`,
`subject_types_supported` and `id_token_signing_alg_values_supported`, three
fields RFC 8414 does not define. RFC 8414 §5 permits that filename for general
OAuth metadata, so a conforming plain OAuth 2.0 authorization server is
rejected; and because the parse throws instead of continuing the candidate
loop, discovery aborts and the connection fails outright.
Filed upstream as modelcontextprotocol/typescript-sdk#2733.
`core/auth/oidcDiscoveryCompat.ts` works around it without fabricating a
field: on a failed RFC 8414 candidate it probes the OIDC candidates the SDK
would try next and, when one returns a document that satisfies
`OAuthMetadataSchema` but fails the OIDC schema, serves that body as the RFC
8414 response so the SDK picks the schema that describes it. A genuine OpenID
provider document is left to the SDK's own OIDC leg. Issuer validation runs
unchanged, since the substituted document is the one the server published.
It wraps `effectiveAuthFetch` — above the fetch tracker, the opposite of
`withOAuthEndpointOverrides` — so the Network tab still records the real 404
and the real probe rather than the substitution.
The candidate derivation mirrors the SDK's `buildDiscoveryUrls`, which a fetch
wrapper cannot call, and a test pins it against that export so the two cannot
drift.
Adds `oauth.asMetadataPath` to the composable test server (mirroring
`oauth.resourceMetadataPath`) and the `oauth-rfc8414-at-oidc-path-http.json`
showcase config that reproduces the failure.
Closes#2172
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UL9retfvAXRgvi6EWk4SY4
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot review on #2176. All three findings were the same gap seen from
three angles: `"after-first"` counts *resource-subscription* listens, not
listens, and both the README and the option's own doc comment said
"the first listen".
That distinction is load-bearing rather than incidental — the Inspector
opens a listen at connect time whenever a list-change opt-in is live
(#1920), so counting listens would spend the allowance there and refuse
the user's very first Subscribe, leaving the documented repro describing
a trace nobody sees. It is also what a reader of the option would
otherwise get wrong.
- README: say "the first listen that subscribes to a resource" in both
places, and name the connect-time listen as the reason.
- `ServerConfig.modern.neverAcknowledgeSubscriptions`: document the
list-change exemption and contrast it with `true`.
- Integration test for the mode itself, with every list-change opt-in on
so the connect-time listen really is opened: it must be acknowledged
without consuming the allowance, the first resource subscription
acknowledged, the next refused with the stream left `active`.
Closes#2097
Signed-off-by: cliffhall <cliff@futurescale.com>
A modern-era `subscriptions/listen` is a long-lived request: the first
message on its stream must be `notifications/subscriptions/acknowledged`,
and the JSON-RPC `result` for the listen id is reserved as the
graceful-closure marker. A server that answers the listen request with a
bare `result` is saying "acknowledged and closed in the same breath" — the
SDK settles the subscription `graceful` and rejects the pending `listen()`.
The Inspector read that rejection as an ordinary drop: eight re-lists over
roughly a minute, the badge flickering `Reconnecting…`, and a final bare
`Stream ended` that said nothing about why. Accepting the message was
never wrong — it is a well-formed graceful-closure response. The silence
was.
- `core/mcp/subscriptionAck.ts` owns the predicate. The SDK gives this
close no code of its own — it is the same `SdkError(ConnectionClosed)`
any pre-ack close carries — so the predicate reads the message, since
the alternative is refusing to retry a genuinely transient drop.
- The condition is deterministic, so the stream ends on the first
occurrence instead of spending the whole backoff run. Both routes are
covered: the one a subscribe/unsubscribe reaches, and the one a
reconnect reaches when an acknowledged stream drops and the server has
since started refusing.
- A `"never-acknowledged"` status of its own, not `"ended"` — `ended`
means an expected close. It surfaces as the thrown error's message, an
orange "Not acknowledged" badge, and a notice in the panel.
- `subscriptions-never-acknowledged-http.json` reproduces it. It
acknowledges the first listen that subscribes to a resource and refuses
every one after, which is what makes the badge reachable by hand.
Closes#2097
Signed-off-by: cliffhall <cliff@futurescale.com>
The root `ci` script was never what runs in GitHub CI, and the name worked
against us three ways: it collides with the built-in `npm ci` (which does
something else entirely and is one keystroke away), it invites the
cross-engine passes into a workflow by looking like the thing a workflow
should call, and it blurs "GitHub CI" and "the local gate" in every doc
that names it.
- Rename `ci` → `local:gate` and `ci:storybook` → `local:storybook`, with
no back-compat alias: `npm run ci` now fails with npm's missing-script
error, which prints the available scripts.
- Add `scripts/lib/workflow-gate.mjs` + its `test:scripts` suite, which
runs over the repo's real `.github/workflows/**` and fails on an
invocation of a `local:*` script, of a non-Chromium engine pass (derived
from SUPPORTED_BROWSERS), or of `smoke:web:engine`, or on `SMOKE_BROWSER`
set to anything but a literal `chromium`. It does not forbid
`npm run smoke`, `smoke:web:chromium` or `smoke:tui` — those belong in CI
and are there today. Comments are not scanned, so the workflow can still
explain itself. This is the durable half; the rest is prose.
- Document the two-tier model once, in the root README ("Two tiers: GitHub
CI and the local gate"), and point the other docs at it rather than
restating the split.
- Sweep the ~40 stale references across README, AGENTS.md,
.github/copilot-instructions.md, the client READMEs, the roadmap doc and
the script headers. AGENTS.md and copilot-instructions.md change
together, per the mirror rule.
No gate changes what it actually runs.
Signed-off-by: Cliff Hall <cliff@futurescale.com>
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot review round 1.
`refreshStoredAuthToken` consumes the same fallback and made a single SDK
discovery call, so preserving the path there — without the walk the other two
consumers got — would have regressed exactly the case the walk exists to keep:
a path-hosted MCP server whose authorization metadata is published at the
domain root.
It injects its own discovery function as a test seam, so the walk is now also
exposed as `discoverAuthorizationServerMetadataFromCandidates(candidates,
discover)`, which takes that function and reports *which* candidate answered —
the CLI needs the winning URL, since it is the base the token request is made
against, not just the metadata.
Also drops the `as unknown as typeof fetch` from the new test in favour of
`vi.fn<typeof fetch>()`.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013hzwzS8UvBsr4yZm7o7sev
Signed-off-by: cliffhall <cliff@futurescale.com>