#1954 wired the list-load error off the aggregate managed stores only.
With `paginatedLists` on, those stores deliberately skip their all-page
walk, so their error is permanently null — while the paged stores that
actually drive the sidebar had no error state at all and `loadPage` had
a try/finally with no catch. A failing list showed an empty panel with
no alert and no Retry, and the connect-time `void loadPage(undefined)`
left an unhandled rejection.
- Give PagedTools/Prompts/ResourcesState observable error state: an
`errorChange` event plus `getError()`, set in a new catch in
`loadPage`, cleared on the next success and on disconnect. The
rejection is still re-thrown, matching ManagedListState — callers'
auth-recovery wrappers key off it to detect a 401.
- Catch the connect-time load's rejection (`.catch(() => {})`) now that
the failure is recorded as state rather than lost.
- Select the error by mode in `usePaginatedList`, the same way `items`
already is, and read it in App.tsx from the pagination model.
- Rename `useManagedListError` to `useListError`: both store families
expose an identical `errorChange`, so the hook declares that one-event
contract itself instead of importing ManagedListEventMap.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0177mPHAdECD18nLLCTwR5rh
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot review round 1. The helper's contract is exactly-once teardown
and the test asserted it must not lean on Hono's own re-entry guard, but
neither the implementation nor the test actually enforced that: the
listener had no local guard and the test aborted only once.
Signed-off-by: cliffhall <cliff@futurescale.com>
Both SSE handlers installed their subscriber, primed the stream so
Firefox's fetch() resolves (#1858), and only then registered onAbort.
Hono's onAbort has no already-aborted replay and abort() fires only the
subscribers registered at that moment, so a client disconnecting while
the priming write was in flight fired nothing: the session event
consumer / server-list subscriber stayed installed, the mcp.json watcher
was never stopped, and the handler parked forever on a promise nothing
would resolve.
Add primeAndHoldSseStream, which registers one listener before the first
await — it both cleans up and releases the hold, collapsing the previous
duplicate onAbort registrations. Priming still happens after the
subscriber is installed, since callers treat the stream's first bytes as
proof they are subscribed.
Closes#1999
Signed-off-by: cliffhall <cliff@futurescale.com>
Addresses Copilot's round-19 review on #2035 -- a divergence introduced by
my own round-14 guard rather than by the original code.
The SDK validated a value inside `encodeValue`, i.e. only after looking one
up by a DECLARED name. The restored guard checked the caller's whole map, so
an unrelated entry failed a template that never mentions it. Measured on
9caac43d:
tryExpandUriTemplate("x://{id}", { id: "7", stale: "a".repeat(1_000_001) })
=> error: The value for "stale" exceeds the 1000000-character limit
RFC 6570 ignores an extra variable, so this refused a perfectly valid read.
`valueLengthError` now takes the names to consider and both callers pass the
template's declared set.
Copilot's second half is worth taking on its own: strict expansion parsed
the template THREE times -- inside `templateError`, again for the name list,
again to expand -- and the template is server-controlled and may be 1 MB.
It is now parsed once and reused, with validation split into
`sdkTemplateError` (the constructor's unclosed-brace and length/count
limits) and `partsError` (this module's own grammar), so `templateError` and
strict expansion share both halves rather than duplicating either.
npm run ci passes.
Signed-off-by: cliffhall <cliff@futurescale.com>
Addresses Copilot's round-18 review on #2035. Two suppressed comments, both
holes in my own recent fixes rather than in the original code.
1. Round 16's grouping keyed off the length-announcing lead byte alone, so
it accepted sequences RFC 3629 forbids -- and the comment claiming they
fell back to per-triplet counting was simply wrong. Measured on 05bbfe50:
x{+v:1} "%C0%80x" => "x%C0%80" overlong
"%E0%80%80x" => "x%E0%80%80" overlong
"%ED%A0%80x" => "x%ED%A0%80" UTF-16 surrogate
"%F4%90%80%80x" => "x%F4%90%80%80" past U+10FFFF
The lead-byte ranges are now the well-formed ones -- C2-DF, E0 only with
A0-BF, ED only with 80-9F, F0 only with 90-BF, F4 only with 80-8F -- so
each of the above falls back to one triplet, which is what the fallback
was always documented to do. The legal boundary cases (%E0%A0%80,
%ED%9F%BF, %F4%8F%BF%BF) are tested alongside, so tightening the ranges
cannot quietly start splitting valid characters.
2. The preview never ran the read's template validation. It expands
expression by expression, so `x://{a}}/{b}` with both fields filled
previewed `x://1}/2` -- a URI whose stray `}` makes every read refuse.
Validation moved into an exported `templateError` that both callers
consult, so they cannot drift. It subsumes the narrower rule round 12
added here ("leave the invalid part standing"), which still let the REST
of such a template expand: the refusal is per template, not per
expression, so the preview now shows the template verbatim -- literals
unencoded included, since half-normalizing an unreadable template invents
a string the server never published. Two existing tests asserted the
weaker behavior and now assert this one.
npm run ci passes.
Signed-off-by: cliffhall <cliff@futurescale.com>
Addresses Copilot's round-16 review on #2035. Two suppressed comments, both
real, and both refinements of fixes from the previous two rounds rather than
defects in the original code.
1. Round 11 settled on "a pct-encoded triplet counts as one character", but
a multi-octet character spans several triplets -- `%C3%A9` is one `é`.
Measured on a3dd8563:
x{+v:1} v = "%C3%A9x" => "x%C3" a lone lead byte, decoding to nothing
`prefixUnits` now recognizes a well-formed pct-encoded UTF-8 sequence from
its lead byte (RFC 3629: C2-DF two octets, E0-EF three, F0-F4 four;
continuations 80-BF), longest alternative first so a four-octet sequence
is not read as a two-octet one followed by loose triplets.
A malformed sequence -- a lead byte with too few continuations, or a stray
continuation -- matches no sequence alternative and falls back to
per-triplet counting. That is the conservative direction: it counts as
MORE units, so truncation keeps less rather than emitting octets that
were never in the value.
2. Round 14's per-value ceiling only covered the read. The panel calls
`previewUriTemplate` on every keystroke, and that path expands expression
by expression, so it reached the allocation-heavy encoders with the same
oversized value -- submission refused while the UI froze on the paste
anyway. Both paths now share one exported `valueLengthError`, checked
before any encoding happens.
npm run ci passes.
Signed-off-by: cliffhall <cliff@futurescale.com>
Addresses Copilot's round-15 review on #2035.
1. `readResourceFromTemplate` had no regression distinguishing this module
from the SDK expander it replaced: the existing test uses `report.txt`
and the transport tests expand separately and call `readResource`, so all
of them pass either way.
Writing that test corrected something I had asserted twice in this PR.
The first version used `foo/bar` -- and verified by reverting the wiring,
it still passed. `encodeURIComponent` DOES encode `/`, so the SDK expands
`foobar://events/{topic}` to `foobar://events/foo%2Fbar` exactly as this
module does. #1919 was the WEB PANEL's own `String.replace`, not the SDK
expander, which the TUI path was using correctly all along.
The test now uses `a!b`. `!` is a sub-delim: RFC 6570 requires it
encoded, `encodeURIComponent` leaves it bare, so the SDK returns
`foobar://events/a!b` and the assertion fails. Re-verified by reverting
the wiring -- 2 of the 10 tests fail (this one and the malformed-template
refusal), where before the change none did.
2. The module summary said "shared by every client" a dozen lines above the
paragraph explaining the CLI is not a consumer. Now says web and TUI.
Also records, on MAX_VALUE_LENGTH, the audit prompted by round 14: the
per-value ceiling was the ONLY guard lost with `UriTemplate.expand`. The
template-length (1e6), expression-count (1e4) and variable-name-length (1e6)
limits all live in the SDK's `parse()`, which runs from the constructor --
and strict expansion still constructs a `UriTemplate`, so they remain
enforced. The restored limit is the SDK's `MAX_VARIABLE_LENGTH`, read from
the pinned dist rather than assumed.
npm run ci passes.
Signed-off-by: cliffhall <cliff@futurescale.com>
Addresses Copilot's round-14 review on #2035. Three suppressed comments,
all real; each measured on 1c595e96 before acting.
1. A brace surviving in a literal is an unmatched one, and not a legal
literal character. The SDK's constructor rejects an unclosed `{` but
reads a stray `}` as text, and this parser did the same:
expandUriTemplateStrict("x://a}", {}) => "x://a}"
-- a "URI" carrying a brace, with the panel enabling the read on it.
Both halves are now refused the same way, so the withhold behavior
covers the whole class rather than the half the SDK happened to catch.
2. Replacing `UriTemplate.expand` also removed its 1,000,000-character
per-value ceiling. Nothing else bounded what reached the
allocation-heavy encoders, so a pasted or programmatically supplied
megabyte-plus value went straight through. Restored at the SDK's own
limit -- the guard it was, not a new policy -- and the error names the
offending variable.
3. `templateVariables` re-scanned an expression's whole varspec list for
every one of its names to compute `conforming`, which is quadratic in a
multi-name expression. Templates are server-controlled and the SDK
admits one up to 1 MB, so a single expression can carry thousands of
short comma-separated names, and this runs on the render thread.
Iterating the varspecs supplies the name and its conformance in one
pass.
npm run ci passes.
Signed-off-by: cliffhall <cliff@futurescale.com>
Addresses Copilot's round-13 review on #2035. Two suppressed comments, both
real, both in the required-group work from round 7 rather than in the recent
preview rework.
1. `{a,a}` is ONE requirement named twice, but `requiredGroups` stored it as
a two-name group, so everything downstream read it as "either of these
will do". The TUI was left with a form it could not submit: its
`length === 1` test marked `a` optional while ResourceTestModal's guard
still refused a blank. The web panel offered the useless hint
"Any one of: a, a". Names are now deduplicated within the expression --
expansion still emits both occurrences (`x://{a,a}` -> `x://1,1`), which
RFC 6570 requires.
2. The per-field hint used `find`, so a variable in several shared groups
advertised only the first. With `{a,b}{b,c}{a,c}`, filling `b` satisfies
the first two and every visible hint then looks met while Read Resource
stays disabled on the unmet `{a,c}` -- a requirement with nothing on
screen pointing at it.
Fields now hint every shared group they sit in. That alone is not enough,
because no per-field hint can say WHICH group is still outstanding, so
the form states it directly: "Still needed: a or c", built from the same
`unmetRequiredGroups` the submit gate uses, so the message and the button
cannot disagree. `hasRequiredValues` is no longer called here -- the
panel derives both from the one list.
npm run ci passes.
Signed-off-by: cliffhall <cliff@futurescale.com>
Addresses Copilot's round-11 review on #2035, which corrects my own round-9
fix rather than the original code.
That fix grouped pct-triplets only under `+` and `#`, on the reasoning that
every other operator escapes a `%` anyway, so `%61` is three characters
rather than one. Wrong, in a way the narrower rule made visible one operator
over -- measured on 2e06b369:
x/{v:1} v = "%61%62" => "x/%25" truncated to a `%` that was never
a character of the value
RFC 6570 2.4.1 counts characters and says a pct-encoded triplet counts as a
single one, without reference to the operator. Grouping per-operator also
made the same input mean two different things: `%61` indivisible under `+`,
three loose characters under `{v}`. What the operator decides is how a
retained unit is *encoded* afterwards -- a simple expansion still escapes
the kept triplet's `%`, so `%61` goes out as `%2561` -- not what counts as
one character.
`prefixUnits` no longer takes an operator, and the test that codified the
old split now asserts the uniform rule across simple, named, and reserved
expansion.
npm run ci passes.
Signed-off-by: cliffhall <cliff@futurescale.com>
Addresses Copilot's round-10 review on #2035. One inline comment, one
suppressed; both real.
1. Literals were copied through verbatim, but RFC 6570 3.1 requires them
pct-encoded on expansion -- the conformance case `café/{var}` expands to
`caf%C3%A9/value`. Measured on ef3f5e74 it produced `café/value`, raw
UTF-8 in the path; since this module replaced the SDK's expander for both
clients, nothing else was going to encode it. (The pinned SDK does not
either -- it returns `café/value` too -- so this is a gap we inherited
rather than introduced.)
`encodeLiteral` keeps reserved delimiters (a literal's `/`, `?` and `#`
are structure) and existing pct-triplets, and encodes the rest. A BRACE
passes through: it can only reach a literal from a malformed template,
where an unclosed `{` becomes trailing text, and `%7B` would leave a
string resembling neither the template nor anything the server can match.
This is also what removed the preview's placeholder machinery. No token
can survive a round trip now that literals are encoded, so the preview
assembles part by part instead -- `encodeLiteral` for literal runs,
`expandTemplateExpression` for filled expressions, `part.source` for the
rest. Both halves still come from the shared expander, so the preview
cannot promise a URI that submitting would not send, and the question of
what token could never collide with a server-supplied template is gone.
2. On the varname set I took the structural point rather than the
conclusion. `VARCHAR` is RFC-exact again; `-` and `~` moved into a
separately named `TOLERATED_VARCHAR` tier, and a name needing it parses
with `conforming: false`, surfaced on `TemplateVariable`.
So the grammar in the code says what the RFC says and the tolerance is
explicit and separately tested -- but the Inspector still expands
`{default-graph-uri}`, because real servers publish hyphenated names and
the SDK's matcher round-trips them. Refusing to read a resource that
demonstrably works is a worse failure for a debugging tool than expanding
a name the conformance suite would reject. A caller wanting RFC-exact
behavior refuses on the flag rather than re-deriving the grammar.
npm run ci passes.
Signed-off-by: cliffhall <cliff@futurescale.com>
Addresses Copilot's round-9 review on #2035.
RFC 6570 2.4.1 counts the prefix in *characters* and is explicit that a
pct-encoded triplet counts as a single one. Truncation went by code point,
so it cut a triplet in half -- measured on 6acaff70:
x{+v:5} v = "%61%62%63%64%65%66" => "x%61%256"
The orphaned "%6" is not a triplet, so encodeAllowReserved then (correctly)
escaped its `%`, and the value went out carrying a byte the caller never
asked for. Now "x%61%62%63%64%65".
Triplets are units only under `+` and `#`. Under every other operator the
encoder escapes a `%` anyway (`%61` -> `%2561`), so the three characters
really are three and grouping them would mis-count the prefix -- asserted
both ways. Astral code points remain single units under both, which is what
`Array.from` was there for.
Also corrects the comment on `readResourceFromTemplate`, which still said
the shared helper drops blank values. It has not since 6acaff70: `params`
passes through as given, so only an absent key omits its expression and a
direct API caller can request `?q=` deliberately. A caller whose values come
from a form drops its own blanks first.
Signed-off-by: cliffhall <cliff@futurescale.com>
Addresses Copilot's round-8 review on #2035 (one inline comment, one
suppressed). Both real.
1. RFC 6570 distinguishes an UNDEFINED variable, which omits its whole
expression, from one defined as the empty string, which expands. The
expander was calling `definedValues` on the way in, collapsing the two --
so `x{?q}` with `{ q: "" }` gave `x` instead of `x?q=`, and there was no
way for any caller, `readResourceFromTemplate` included, to request
either that or `x;q`. Key presence is now honored, including §3.2.7's
rule that the matrix operator drops the `=` for an empty value (`x{;q}`
-> `x;q`, while `?`/`&` keep it).
Dropping blanks is a FORM concern, so it moved to the two form
boundaries: the web panel seeds every declared variable with "" and the
TUI's ink-form returns "" for every untouched field, so neither can tell
"never touched" from "deliberately empty" -- but that is a fact about a
text input, not about the template, and it has no business deciding what
a template means for every other caller.
Six unit tests and one integration test encoded the old collapse and now
assert the corrected meaning. The prototype-collision cases get stronger
rather than weaker: a blank `{?toString}` expands to `?toString=` -- its
OWN empty value -- where the original bug expanded the inherited
function's body.
2. The expansion error is now `role="alert"`. It can appear while typing (a
pasted value that cannot be encoded), and plain text is not announced, so
a screen-reader user met a disabled Read Resource with no stated reason.
npm run ci passes.
Signed-off-by: cliffhall <cliff@futurescale.com>
Addresses Copilot's round-7 review on #2035. Two suppressed comments, both
real; each reproduced against this branch before acting.
1. `parseVarSpec` was a "strip the first `*`, trim, split on `:`" pass, so
it accepted shapes RFC 6570's varspec production does not admit --
measured on the previous commit:
x://{*id} name "id" => "x://abcdef" explode is a TRAILING modifier
x://{id*:3} name "id" => "x://abc" the two modifiers are exclusive
x://{ id } name "id" => "x://abcdef" whitespace is not a varchar
x://{a b} name "a b" => "x://1" ditto -- and it emits into the URI
`{id*:3}` is the worst of them: it silently truncated the value through a
combination the grammar forbids. Parsing is now one anchored regex --
a varname, then at most one trailing `*` or `:1-9999`.
The name set is `varchar` widened by `-` and `~`, deliberately. A name is
the one thing expansion emits into the URI WITHOUT encoding it (`;`, `?`
and `&` write `name=value`), so the rule it has to satisfy is "needs no
encoding" -- RFC 3986 unreserved plus pct-encoded, of which the RFC's own
varchar is a subset. Strict varchar would refuse `{user-id}`, which real
servers publish and which the SDK's matcher round-trips; refusing to read
a resource that demonstrably works is a worse outcome for a debugging
tool than a name one character outside the production. Everything now
rejected is a shape we would otherwise have to guess at.
2. The TUI built its "Missing required template variable(s): ..." list with
its own bare `values[name]` filter while gating on `hasRequiredValues`,
which reads own properties only. For a variable legitimately named
`constructor` the two disagreed: `({})["constructor"]` is `Object`, whose
`.length` is 1, so the list came out empty and the error named no field
at all while the submit stayed blocked. Both now come from one exported
`unmetRequiredGroups`, with `hasRequiredValues` defined in terms of it.
Also renames a test whose title still said multi-name query expressions were
left "to the SDK, which handles them" -- expansion has been owned here since
935113d1; the behavior it asserts is naming, not delegation.
npm run ci passes.
Signed-off-by: cliffhall <cliff@futurescale.com>
Ports the two behaviors PR #2033 (the parallel attempt at #1919, now closed
as a duplicate) got right and this branch did not.
1. An expression declaring no variable is a malformed template, not one
with a member to skip. RFC 6570 requires at least one varspec per
expression and admits no empty member, so `{}`, `{,}`, `{a,}`, `{?}`
and `{*}` (an explode modifier is not a name) now make the template
invalid. Skipping them was the more dangerous reading: `x://{}`
expanded to `x://` while the form rendered no inputs, so its
"everything required is filled" check was vacuously true and it
submitted a URI that is not the template the server published.
2. The read is withheld when expansion fails. `expandUriTemplate`'s
raw-template fallback exists for the preview, which runs during render
-- but the submit path used it too, so an invalid template was read
with its braces intact and the server answered with a confusing "not
found" for a defect that is not the user's. `tryExpandUriTemplate`
returns the URI or the reason as a value the caller cannot mistake for
one; the panel gates Read Resource on it and prints the reason.
This also covers a value that cannot be encoded -- an unpaired
surrogate has no UTF-8 encoding, so `encodeURIComponent` throws
`URIError` on it, and a text input can hold one via paste.
`requiredGroups` now skips an expression naming no variable: an empty
group can never be satisfied, so it would gate the form a second time on
a condition nothing can meet, and the "any one of" hint built from it
would name no fields. The accurate reason is the malformed template,
which the expansion gate reports.
npm run ci passes.
Signed-off-by: cliffhall <cliff@futurescale.com>
Two suppressed review findings.
With an override configured, the wrapper cloned and parsed every
successful application/json response — every tools/call result and every
resource payload on the direct CLI/TUI transports — only to conclude it
was not a metadata document. It now tests the request URL for the RFC
8414 / OIDC well-known paths first, so ordinary traffic costs one string
test and is returned untouched.
The read path also trusted StoredMCPServer's `string` type for the two
override fields, which a hand-edited mcp.json does not honor: the CLI and
TUI read the file directly and then `.trim()` these, so a number would
crash the server load. Guarded with cleanEndpointOverride, mirroring
cleanAuthorizationParams.
Signed-off-by: cliffhall <cliff@futurescale.com>
Addresses Copilot's round-6 review on #2035.
`toString`, `constructor`, `valueOf` and `__proto__` are all valid RFC
6570 variable names -- `varname` allows ALPHA / DIGIT / `_` / pct-encoded
-- and every lookup here was a bare `values[name]`, which finds
`Object.prototype`'s member for each of them. Measured: `({})["toString"]
!== undefined` is true with typeof "function", and `({}["constructor"] ??
"").length` is 1.
So a *blank* `{?toString}` field read as supplied and expanded a function
body into the URI instead of omitting the expression, and
`hasRequiredValues([["constructor"]], {})` returned true because
`Object.length` is 1 -- a required group satisfied by nothing.
All reads now go through an own-property `readValue`, and the web
preview's filled-check uses `Object.hasOwn`. `expandExpression` carries
the value through its filter rather than re-reading it afterwards, so the
"is it defined" test and the read cannot disagree and nothing needs a
non-null assertion.
The remaining six findings were documentation drifting behind the code,
which matters here because the comments are the argument for why this
module exists:
- The web helper still described the SDK's second-`?`-to-`&` rewrite as
something the preview relies on. That was removed last round.
- Three places still named the CLI as a consumer. It has no template form
and passes an already-expanded `--uri` to `readResource`.
- The PR description still described the superseded architecture
(expansion delegated to the SDK), i.e. the opposite of what now ships.
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot round 2 (PR #2039) surfaced no new visible comments but six
suppressed ones. Four were actionable.
`clients/tui/src/App.tsx` — a stale-completion race in the new banner:
start disconnecting server A, switch to B, then let A's disconnect
reject, and A's failure appears under B. Rapid same-server retries had
the same shape, and the stale attempt is the one most likely to reject.
Claim a monotonic attempt token before awaiting and publish only if it
is still current and the server has not changed; `handleConnect` bumps
the same counter so a connect retires an in-flight disconnect. The
rejection is still owned when superseded — just not published. The
regression test drives a deferred rejection across a server switch, and
fails without the guard.
`tsconfig.lint.json` — the root type-aware block matches
`test-servers/src/**/*.tsx` but the parser project omitted that
extension, so such a file would have failed with "not found in any of
the provided project(s)" instead of being linted. Added, and AGENTS.md
now states the invariant: the include must stay a superset of the lint
globs.
`clients/web/server/{server,vite-hono-plugin}.ts` — the `open()`
rejection branch was untested, and duplicated. Both were fixed by
removing the duplication: `openBrowser` now lives beside
`printServerBanner` in `web-server-config.ts`, with one implementation
to test. Two copies of a one-line `.catch` is two chances for one to
drift back to a bare `open(url)`. The dev plugin is not booted in tests
— it returns early under VITEST by design — but it calls the same
tested helper.
`core/mcp/remote/node/server.ts` — `closeAbortedStream`'s rejecting-close
path, the entire reason the helper exists, had no test. Exported it (as
this file already does for `requestIdForSendWait` / `mcpParamHeadersOnly`)
and covered both legs, asserting no unhandledRejection fires.
Also corrects AGENTS.md, which said each client lists "both" tsconfig
projects — true for cli/tui/launcher, but web lists four leaf projects.
Signed-off-by: cliffhall <cliff@futurescale.com>
Addresses Copilot's round-5 review on #2035 — eight suppressed comments,
all of them real.
The consequential one overturns behavior I copied from the SDK and
defended in two earlier rounds. RFC 6570 expands each expression
independently; it carries no cross-expression state. The SDK tracks
whether a query expression has already emitted and rewrites a later
`{?two}`'s `?` to `&`. That looks friendlier and is wrong, and its own
matcher says so: for `x{?one}{?two}` it expands to `x?one=1&two=2`, and
`match("x?one=1&two=2")` on that same template returns **null**, while
`match("x?one=1?two=2")` returns both variables. So the rewrite emitted a
URI the advertised template cannot match — #1919 one level up. A server
that wants a continuation advertises `{?one}{&two}`, which expands to `&`
and matches; producing that shape is the server's choice to declare, not
ours to infer.
Also:
- `{id:abc}` was silently treated as `{id}`, and a test codified it. RFC
6570's max-length is `%x31-39 0*3DIGIT`, so `{id:}`, `{id:0}`,
`{id:abc}` and `{id:10000}` are invalid templates rather than templates
with an ignorable modifier — and the SDK's constructor accepts them all,
so nothing else rejects them. Strict expansion now throws; lenient
returns the raw template. Discovery stays lenient so the panel still
renders rather than going blank.
- The TUI could submit `{a,b}` completely blank while the web panel
blocked the same request: ink-form has no way to express "any one of
these", so its members are left optional and the modal needs its own
group check. Added, with tests — it was also below the coverage gate
without them (functions 76.92%).
- Added the integration test the config never had: it resolves the
checked-in config and drives all four reads over a real transport, so a
misspelt preset fails there rather than only when someone runs the repro
by hand.
- "All three clients" was false. The CLI has no template form and its
`resources/read` passes the already-expanded `--uri` straight to
`readResource`, so nothing here runs for it. Corrected in the README,
AGENTS.md, and the module comment, and dropped a docblock still
describing the SDK-delegation path removed last round.
Signed-off-by: cliffhall <cliff@futurescale.com>
The overrides are per-server configuration for the *resource* server's
authorization server, but the fetch wrapper that applies them is shared
with the enterprise-managed (EMA) flow, whose IdP OIDC discovery runs
through the same fetch and satisfies the metadata predicate. An
authorization override could therefore redirect the IdP login to the
resource AS, and a token override could send the IdP code or refresh
token there.
OAuthManager.getEndpointOverrides() now returns nothing when the server
is enterprise-managed — the same boundary redirectToExternalAuthorization
draws for the custom authorization parameters (#2018) — with a regression
test, the note surfaced on both form fields, and the rule documented.
Signed-off-by: cliffhall <cliff@futurescale.com>
Addresses Copilot's round-4 review on #2035 — again reported as "no new
comments" while carrying three suppressed ones. All three reproduced.
1. The TUI form still named its fields from the SDK. `uriTemplateToForm`
read `UriTemplate.variableNames`, which mangles a name: `{;id}` yields
";id" and `{id:3}` yields "id:3". The form therefore submitted
`{ ";id": "7" }` while the shared expander looked up `id`, found
nothing, and dropped the expression — the value vanished silently.
This is the finding that mattered most, because it falsified the claim
this change is built on. Moving the expander into core only makes the
clients agree if each client's FORM derives its names from the same
parser: a form submits under the names it rendered. The TUI now reads
`templateVariables`, and the SDK template is constructed only to
validate, preserving the existing malformed-template diagnostic.
Its `required` flag comes from `requiredGroups`, and only a variable
that is the sole member of a non-omittable expression is marked: ink-
form cannot express "any one of these", so marking every member of
`{a,b}` required would refuse input the expander accepts.
2. `encodeURIComponent` is not RFC 3986's unreserved set — it leaves the
sub-delims !'()* bare, which RFC 6570 requires encoded for every
operator except + and #.
Fixing that settled a design question left open in the previous round.
With two encoders, the SAME value encoded differently depending on
whether its expression happened to carry a modifier, since only the
modifier pushed it onto our path. So delegation is gone entirely: one
expander, one set of rules. The SDK's `UriTemplate` is still
constructed, but only to validate a template.
3. The "Any one of: a, b" hint could contradict the disabled submit
button. A name can sit in a singleton required group AND a shared one
(`x://{a}/{a,b}`), where the singleton demands that exact field. The
hint is suppressed in that case.
Signed-off-by: cliffhall <cliff@futurescale.com>
A floated promise is invisible at review time — the call reads like an
awaited one minus four characters — and the unhandled rejection it
produces surfaces in a different test, in a different file, as a stack
pointing at SDK internals. In #1947 two un-held `callTool` calls made
`npm run ci` unpassable and took a full investigation to attribute; the
fix was two lines. `@typescript-eslint/no-floating-promises` catches the
class outright, so enable it at `error` everywhere.
The rule is type-aware and `tseslint.configs.recommended` is not, so each
scope's config gains a parser project. The four clients name their own
tsconfig projects (both of them — `src` and `__tests__`/`server` live in
different ones). The root scope has no tsconfig at all, so add
`tsconfig.lint.json`: a lint-only project covering `core/**`,
`test-servers/src/**`, and `vitest.shared.mts`, emitting nothing and
gating nothing. It sets `moduleResolution: bundler` deliberately — under
NodeNext `core/`'s extensionless imports fail to resolve, every import
degrades to `any`, and the rule silently stops seeing promises at all.
Measured surface, and the fixes:
- core (2) — `stream.close()` in two Hono `onAbort` listeners. Hono
invokes subscribers with a bare `subscriber()`, so a promise returned
from the listener is floated one layer up; `closeAbortedStream` owns
the rejection where it can actually be owned.
- tui (5) — `handleDisconnect` had no catch of its own and its only
caller is a key handler that cannot await, so a failing disconnect was
a live unhandled rejection; it now surfaces the message the way
`handleConnect` does. The rest are `void` at callers that genuinely
cannot await, over callees that already own their failures.
- web (92) — 83 are Storybook `expect(...)`, which is instrumented and
returns a promise, now awaited (`scrollAreaStoryAssertions` is async
for the same reason). Two tests were asserting against a provider call
they never awaited. `open(url)` in both web servers now warns instead
of escaping a synchronous callback.
- cli, launcher — already clean.
Type-aware linting costs time: `clients/web`'s `eslint .` goes from ~8s
to ~19s, inside `validate`. Narrowing the loaded projects is the lever if
that needs reducing later; dropping the rule is not.
Closes#1959
Signed-off-by: cliffhall <cliff@futurescale.com>
Adds two optional per-server fields — `oauth.authorizationUrl` and
`oauth.tokenUrl` — that override the endpoints authorization-server
metadata discovery resolved, so a server can be pointed at a development
or staging authorization server without changing what it advertises.
SDK v2 routes both endpoints through the discovered metadata document and
neither through OAuthClientProvider, so the override is applied by
wrapping the client's base fetch and patching the metadata document in
flight (core/auth/endpointOverrides.ts). Wrapping the base fetch — rather
than only the auth fetch — also covers the discovery the SDK runs from
inside the transport on the 401/refresh path.
The fields round-trip through mcp.json, the /api/servers routes, the
runner (CLI/TUI), and the Server Settings → Authorization panel, where a
value that is not an absolute http(s) URL is flagged inline; at runtime
such a value is dropped with a single warning rather than failing the
connection.
Signed-off-by: cliffhall <cliff@futurescale.com>
Addresses Copilot's round-3 review on #2035. It again reported "no new
comments" while carrying two suppressed ones; both reproduced.
1. Requiredness could not live on a variable at all. Deduplication kept the
first occurrence's group, so in `x{?a}{?b}{a,b}` both names ended up
required with singleton groups and the form demanded both -- while the
SDK expands that template with only `a` to "x?a=11". Widening the stored
group would not have been enough either: in `{a,b}{a,c}`, filling `b` and
`c` satisfies both expressions, which no per-variable flag can express.
So requiredness is now returned per expression by `requiredGroups`, and
`hasRequiredValues` asks that each group be satisfied by any one of its
names. `TemplateVariable.groupNames` is gone rather than left as a field
that quietly means something narrower than it reads; `required` remains,
documented as driving the "Optional" marker and nothing else.
2. `encodeURI` is not the allow-reserved encoder `+` and `#` call for. It
escapes `[` and `]`, which are reserved and must survive, and it escapes
`%`, so an already-encoded value is double-encoded. Measured:
"[::1]" -> "%5B::1%5D" and "%2F" -> "%252F". Both corrupt the URI rather
than merely over-escaping it -- an IPv6 literal or a pre-encoded path
reaches the server altered, which is the same class of defect #1919 is
about.
Added an RFC 6570 3.2.1 encoder that preserves reserved characters and
existing pct-triplets, splitting on `%XX` so a lone `%` is still encoded
to `%25`, and matching with the `u` flag so an astral character is
encoded whole. `+` and `#` expressions are now taken over even for a
single name, so both expansion paths agree on what those operators mean.
Signed-off-by: cliffhall <cliff@futurescale.com>
Addresses Copilot's round-2 review on #2035. It reported "no new comments"
but carried three *suppressed* ones; all three reproduced against the
pinned SDK.
1. The `;` path-parameter operator is absent from the SDK's operator list,
so `{;id}` parsed as a variable literally named ";id" and expanded to
nothing. Added the operator and its named expansion (`;a=1;b=2`).
2. An RFC 6570 prefix modifier was folded into the variable name: `{id:3}`
yielded a variable called "id:3" and expanded to nothing. Varspecs are
now parsed properly and the value truncated before encoding. Truncation
is by code point, since `String.prototype.slice` counts UTF-16 units and
would split an astral character into a lone surrogate.
For both of these the wrong URI is the lesser problem: a form has to
*name* the variables it asks the user to fill, so the panel was
rendering fields labelled `;id` and `id:3` that nobody could use.
3. Requiredness was applied per variable, but it is a property of the
*expression*: RFC 6570 drops undefined names from a multi-name
expression, so `{a,b}` with only `a` filled expands to `a`'s value --
the SDK does this too. The panel was refusing input the expander would
have accepted. `hasRequiredValues` now encodes "any one name in a
required group suffices", and such a field reads "Any one of: a, b"
rather than falsely claiming each is mandatory.
Two structural consequences, each pinned by a test:
- Takeover is now per TEMPLATE rather than per expression. Splicing
corrected fragments into a template the SDK re-expands would leave its
cross-expression `?`-to-`&` rewrite blind to the fragments already
resolved.
- Expansion is split into a strict variant that throws and a lenient one
that returns the raw template. `readResourceFromTemplate` wraps the
thrown error with the template name -- three pre-existing integration
tests assert that -- while the form must not throw on a server-supplied
template, since that would take out the panel on render. The strict
variant constructs the SDK template unconditionally, because that
construction is what validates syntax: otherwise `x://{;a}{b,c` would
take the own-expansion path and its unclosed tail would pass as literal
text with nothing objecting.
Signed-off-by: cliffhall <cliff@futurescale.com>
Addresses Copilot's review on #2035. All three findings reproduced against
the pinned SDK before acting.
1. `#` was misclassified as required. Measured: `x://a{#frag}` with no
`frag` expands to exactly `x://a`, a well-formed URI naming a real
resource -- unlike `{+path}` (`x://a/`) or a simple `{userId}`
(`file:///users//profile`), which leave an empty path segment. Moved `#`
into the omittable set; the required cases now assert what the URI
*becomes* when blank, so the rule is checked rather than asserted.
2. Delegating to the SDK did not actually give RFC 6570 expansion.
`UriTemplate.expandPart` takes an early `names.length > 1` branch that
raw-joins values, skipping both `encodeValue` and the operator prefix:
`x://{a,b}` with `a = "foo/bar"` expands to `x://foo/bar,q` -- the very
unencoded-slash defect this PR is about -- and `x://a{/p,q}` to
`x://ax y,z`. Only `?`/`&` are correct, being dispatched earlier.
Fixing that in the web client alone would have left the TUI and CLI
wrong, since `readResourceFromTemplate` expands through the same class.
So parse/classify/expand now live in `core/mcp/uriTemplate.ts` and both
call sites use it. The correction is surgical: a multi-name non-query
expression is expanded here and spliced in as literal text before the
SDK sees the template (safe -- both encoders escape `{`/`}`), while
every single-name and query expression still goes through the SDK
untouched. The preview applies the same correction, so it cannot
promise a URI that submitting would not send.
3. The showcase promised a blank `{?topic}` read that did not work.
`UriTemplate.match()` compiles `{?topic}` to a *required*
`\?topic=([^&]+)`, so `match("foobar://events")` returns null and the
read 404s. A real server exposes the unfiltered collection as its own
resource; the showcase now registers `foobar://events` so the
documented step resolves. Verified end to end through the CLI.
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot round 5 — three of four findings implemented.
- `cleanAuthorizationParams` validates the field as it comes off disk. Only the
web client's /api/servers route checked the shape; the CLI and TUI read
mcp.json directly, so `authorizationParams: "oops"` enumerated as the
character-indexed pairs 0=o, 1=o, … and `{ audience: 5 }` reached
URLSearchParams.set, which stringifies it — either way the Inspector sent
query parameters the user never wrote. Now validated in shared code so all
three clients enforce the documented string→string contract, warning on each
rejection. Follows `cleanRoots`, which guards the same class for `roots`.
- The form's description now states that these parameters are not sent while
Enterprise-managed authorization is on. The EMA leg authorizes against the
enterprise IdP — a different authorization server — and deliberately sends
none of them, so the copy was presenting a configured-but-inert value as
active.
- The /api/servers malformed-`oauth` warning listed an expected shape omitting
`onInsufficientScope`, which the validator accepts and the docs describe, so
it told users a valid config was malformed.
Ten new cases, all verified to fail against the pre-fix sources.
Declined: recording the authorize URL in the Network tab (repeat of round 2) —
that URL is reached by a top-level browser navigation rather than a tracked
fetch, so it has never appeared there for any authorization request; adding a
synthetic entry changes every OAuth flow and is a product decision for a
maintainer, not a change to make inside this PR.
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot round 4 (one suppressed finding, and a real bug).
`extractSecretsFromStored` rebuilt the stripped `oauth` object from an
allow-list of the non-secret fields. That list had gone stale: it never named
`onInsufficientScope`, so a server carrying both a client secret and a
non-default SEP-2350 policy silently lost the policy on save, falling back to
`reauthorize`. This predates #2018 — the PR only extended the same list with
`authorizationParams` — but the list is the defect, so fix the class rather
than add a third entry to it.
The stripped entry now subtracts the one secret instead of enumerating what to
keep, so any field added to `oauth` later is preserved by construction.
Regression test verified to fail against the allow-list version:
`expected { clientId: 'cid' } to deeply equal { clientId: 'cid', onInsufficientScope: 'throw' }`.
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot round 10.
The scan no longer publishes its malformed entries into the tools/list report
at all. Round 9 only stopped it overwriting the aggregate's; the remaining
case is unsalvageable for a stronger reason than 'two different requests':
- a FAILED strict aggregate runs salvage, which writes the report itself;
- a SUCCESSFUL one means every entry parsed, so the rendered list contains no
malformed entries.
So by the time the scan finds something, either the aggregate already reported
it with indices matching the screen, or the aggregate succeeded and what the
scan found is provably not in the list being displayed. Publishing could only
ever name entries the user cannot see.
Nothing is lost: listToolsForScan still marks its own refused response, so the
finding surfaces on the Protocol entry for the exchange that carried it, where
it is true. The per-page accumulation and raw-entry offset existed only to feed
the removed publish, and go with it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RDXCSrnSBV7vZfxycG5Z6E
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot round 9.
The exclusion scan is a separate, uncached tools/list exchange, so its entries
need not be the ones rendered — the server can answer differently, and a
cache-served aggregate is a different list version. It was overwriting the
aggregate's report wholesale, replacing accurate indices with indices into a
list nobody is looking at. The aggregate now owns the report; the scan
publishes only when the aggregate left nothing, which is the cache-served case
that made it publish at all (round 2).
A conforming re-fetch no longer swallows the mark: the list can change between
the strict page and the lenient one, and a clean second response says nothing
about the first, which was refused. It is marked with the original decode
error when there is nothing per-item to name.
The scan's fallback re-fetch now goes through invokeMcpClient, like the strict
call beside it and like salvageList's walk, so an auth challenge on that
request can still be recovered instead of being swallowed by listAllTools's
best-effort scan catch.
Also fixes listTools dropping an empty-string cursor (truthiness rather than
!== undefined) — its own fallback leg already preserved it, so the two legs of
one scan page disagreed about which page they had fetched.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RDXCSrnSBV7vZfxycG5Z6E
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot round 8.
The era contract validated with the wire schema but returned the raw input,
so the wire schema's normalization was discarded — both era schemas are
z.object, which strips unknown top-level fields as the strict codec does, so
salvaged tools could carry fields the strict path drops. The parsed output is
now what gets normalized and returned. This also simplifies the bridge: issues
come straight from the wire parse with their paths intact, so the custom-issue
forwarding (and its early describeIssue application) is gone.
The malformed-entry report is written by the aggregate walk's salvage, but in
paginated mode the tools/prompts/resources panels render the paged stores,
which neither write nor clear it — leaving a stale warning above a freshly
fetched page it does not describe, with indices into an aggregate the user is
no longer looking at. Those reports are now suppressed in paginated mode;
resource templates keep theirs, having no paged store. Suppressing rather than
adding per-page salvage: pointing at the wrong entry costs more than staying
quiet, and per-page salvage is a feature, not a display fix.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RDXCSrnSBV7vZfxycG5Z6E
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot round 7.
The era contract was derived from the neutral ToolSchema plus one override,
which diverged from the real wire schemas both ways. Measured against SDK
2.0.0 on a real connection:
- modern accepts `inputSchema.properties: 5` and `required: [1]`; ours
rejected them, so a malformed sibling made salvage DROP a conforming tool
and report it as malformed — a false accusation from the screen whose job
is to say which entry is wrong.
- legacy rejects `outputSchema.properties: 5` / `required: [1]`; ours
accepted them, readmitting entries the strict path refused.
- modern rejects a non-string `inputSchema.$schema`, legacy accepts it;
ours accepted on both.
Each era is now expressed as its own wire schema, bridged to Tool by
`eraToolItemSchema`. The bridge exists because both eras accept values the
exported Tool type cannot describe (the SDK returns them typed as Tool
anyway), so the wire schema's output type is irrelevant and z.custom<Tool>
supplies the caller's type — which is what avoids an `as unknown as` here.
Forwarded issues keep their path so the report still names the field.
The full measured matrix is pinned table-driven in listSalvage-era.test.ts:
each row asserts the SDK's verdict AND that our contract agrees, so a
divergence that closes or widens fails loudly.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RDXCSrnSBV7vZfxycG5Z6E
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot round 6.
Bound both fallback walks with LIST_MAX_PAGES, which is now also passed to
the SDK client as `listMaxPages` so the strict aggregate and its fallback
share one value by construction. A server emitting endlessly UNIQUE cursors
never trips the repeated-cursor guard, so the salvage re-walk and the
SEP-2243 exclusion scan would page and accumulate without bound. Hitting the
cap aborts rather than returning a truncated list as a complete one.
Mark the exclusion scan's refused response on every fallback-failure path.
`salvageList` can rethrow bare because ManagedListState marks from the error
it receives; the scan has no such backstop — listAllTools catches and logs a
failing scan by design — so an unmarked rethrow left a response the client
demonstrably refused rendering as a clean exchange.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RDXCSrnSBV7vZfxycG5Z6E
Signed-off-by: cliffhall <cliff@futurescale.com>
Real deployments gate IdP selection, prompt behavior, or audience on a query
parameter the OAuth/OIDC core specs never standardized (Keycloak's
`kc_idp_hint`, OIDC's `login_hint` / `prompt` / `acr_values`, Auth0's
`audience`), and none of them could be driven from the Inspector.
The Inspector never builds the authorize URL — the SDK's `auth()` does, and it
exposes no hook for extra parameters — so the merge happens at the one seam
that sees the finished URL: `BaseOAuthClientProvider.redirectToAuthorization`.
It lives in `core/`, so web, CLI, and TUI all inherit it.
- `core/auth/authorizationParams.ts`: the reserved-key list (`client_id`,
`code_challenge`, `code_challenge_method`, `redirect_uri`, `resource`,
`response_type`, `scope`, `state`), the key validator the form renders
inline, and the merge itself. Reserved keys are dropped with a warning
rather than silently overriding PKCE / the state binding / RFC 8707;
blank-key rows are skipped; the caller's URL is never mutated.
- Applied to the authorization request only — nothing wires it into the token
request.
- Persisted as `oauth.authorizationParams` (a string record) on the per-server
config beside `scopes`, edited as key/value rows in Server Settings ->
Authorization ("Additional authorization parameters"), with an inline error
per offending row plus a section-level warning.
- The enterprise-managed (EMA) leg redirects to a *different* authorization
server (the enterprise IdP), so it goes through the explicit
`redirectToExternalAuthorization` entry point, which skips the merge — a
`kc_idp_hint` or `audience` meant for the MCP server's AS must never be
appended to the IdP's authorize URL.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RDXCSrnSBV7vZfxycG5Z6E
Signed-off-by: cliffhall <cliff@futurescale.com>
Both findings are the same shape: the fallback accepting what the strict path
would not.
- `ModernResultEnvelopeSchema` typed `ttlMs` as any number, where the codec
requires a non-negative integer. `ttlMs: -1` (or `0.5`) plus one bad entry
would salvage, reporting the entry and hiding the envelope violation. Tightened
to `z.int().min(0)`.
- The item schema was the SDK's era-NEUTRAL `ToolSchema`, and the negotiated
era's wire schema is stricter in ways the SDK does not export. Verified
against SDK 2.0.0 on a real connection: on legacy, a tool with
`outputSchema: { type: "array" }` is refused by the strict aggregate but
accepted by the neutral schema; on modern, `execution` is STRIPPED by the
strict path but kept by the neutral one. Either way a salvaged list could show
— and let the user call — a tool the connection's era says isn't valid.
`toolItemSchemaForEra` closes both. Replicating rules that live in the SDK's
internals is a real cost; `listSalvage-era.test.ts` is what makes it safe to
pay, pinning each rule to the strict path's OBSERVED behavior so a divergence
that closes or widens fails loudly instead of rotting.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HDdo1rNRVQnVRRdsqSrvG3
Signed-off-by: cliffhall <cliff@futurescale.com>
Two findings, both about the fallback accepting more than it should.
- The lenient page schema validated pagination and nothing else, so a response
carrying a malformed entry AND an unrelated top-level violation salvaged: the
entry was reported and the other violation vanished with the strict error that
caught it. The page schema is now DERIVED from the method's real result schema
with only its item array relaxed (`lenientListPageSchema`), so every other
field — `_meta`, `nextCursor`, anything a future revision adds — is still
validated. The modern era envelope the raw-wire path bypasses (`resultType`,
`ttlMs`, `cacheScope`) is checked explicitly for the same reason.
Salvage is also narrowed to `InvalidResult`: `UnsupportedResultType` means the
codec doesn't recognize what KIND of frame arrived, so it isn't a list with a
bad entry and reporting an item-level reason would hide a protocol failure.
Marking the Protocol entry still applies to both, hence two predicates.
- On every rethrow path the re-walk had already answered the method, so the
caller's own `markResponseRejected` (in `ManagedListState.refresh`) landed on
the lenient page that succeeded and left the refused response clean. The
correlation is restored before rethrowing — deleted when nothing had answered
before, so the outer mark is a no-op rather than a lie.
`nextCursorOf` / `rawItemsOf` narrow the page's fields instead of casting: the
runtime-keyed `extend()` loses the shape, and asserting it back would be exactly
the unjustified cast the last round removed.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HDdo1rNRVQnVRRdsqSrvG3
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot review: the option's doc still promised the level is set "if server
supports logging" — after the era gate that is exactly the case which now
silently does nothing, since a modern server can advertise `logging` and still
ignore the option.
Document it as legacy-only and point modern callers at the per-request
`io.modelcontextprotocol/logLevel` opt-in (`modernLogLevel` /
`setModernLogLevel()`).
Signed-off-by: cliffhall <cliff@futurescale.com>
The visible review was clean; all five findings were in the suppressed block,
two of them real defects.
- The exclusion scan's aggregate offset was wrong twice over: `excluded.length`
counts only invalid-header tools, and on page one it also folded in the
current page's valid count. A reported index therefore pointed at a position
that doesn't exist — worst for an unlabeled entry, whose index is all the user
has. Replaced with a raw-entry offset advanced by each page's valid + malformed
counts.
- The scan's own refused response was never marked. It is a distinct exchange
from the aggregate's, and the lenient re-fetch moves the method correlation
off it, so its Protocol entry rendered as a clean success the client had in
fact refused. Marked with the captured id, as `salvageList` already does.
- Three double casts in the test fixture are gone: `ListPage` now models raw
wire data (`items: unknown`, `nextCursor?: unknown`), which is what a server
built to emit spec-forbidden shapes actually serves. Declaring the validated
type and casting malformed values through it asserted the opposite of what
these tests exist to check. The cursor map narrows to `string` at the one
place a cursor addresses a page.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HDdo1rNRVQnVRRdsqSrvG3
Signed-off-by: cliffhall <cliff@futurescale.com>
All four findings taken (one visible, three in the suppressed block), plus the
`excludedTools` sibling leak the round-1 reply had deferred:
- `rawItemsOf` read a missing or non-array list member as an empty page, so a
top-level violation (`{ tools: "invalid" }`) on a later page was discarded
and the call returned a silently truncated list. It now returns `undefined`
for "not a list at all", and the walk rethrows the original strict error.
- A failure of the re-walk ITSELF (a malformed `nextCursor`, a connection lost
mid-walk) escaped in place of the original error, whose response is the one
`rejectedResponseId` was captured for. The walk is now wrapped: the original
surfaces, the secondary is logged so it stays diagnosable.
- The exclusion scan's lenient fallback discarded its malformed entries despite
the comment claiming they were reported. Observable when the aggregate is
served from cache: the salvage never runs, so nothing else reports them. The
scan now returns them and `refreshExcludedTools` reports them — only ever
adding, so a clean scan can't clear what the salvage path just wrote.
- An empty-string cursor is a valid cursor, and `cursor ? {cursor} : {}` dropped
it, re-requesting page one and duplicating its entries until the
repeated-cursor guard fired. Both walks now test `!== undefined`.
- `excludedTools` had the same session leak fixed for `malformedListItems` last
round: cleared only on an explicit `disconnect()`, so the `onerror`-with-no-
`onclose` route carried the previous server's set into the next connection.
Cleared on the start-clean path too — safe because every `listAllTools`
recomputes it, so this can only drop a stale set.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HDdo1rNRVQnVRRdsqSrvG3
Signed-off-by: cliffhall <cliff@futurescale.com>
`logging/setLevel` is a legacy-era method, but connect() called it on any
server advertising the `logging` capability, era regardless. The modern wire
era rejects it outright, and because the call sits in the post-handshake
sequence that rejection failed the *connection* — so the CLI (the one caller
passing `initialLoggingLevel`, hardcoded to "debug") could not run any method
at all against a modern server that advertised logging.
Gate it on `protocolEra !== "modern"`. Modern has no session-scoped level to
set: the equivalent is the per-request `io.modelcontextprotocol/logLevel`
`_meta` opt-in, already driven by `modernLogLevel` from the server settings.
So modern skips the call rather than translating it. Legacy is unchanged.
The guard lives next to the capability check in inspectorClient.ts rather
than in the CLI, so any future caller passing `initialLoggingLevel` is
covered too.
Signed-off-by: cliffhall <cliff@futurescale.com>
Three real defects it caught, plus the tests it asked for:
- The strict `tools/list` aggregate is filtered by the SDK for invalid
`x-mcp-header` annotations (SEP-2243), but the salvage path was not: one
ordinary malformed tool would trip the fallback and readmit every
invalid-header tool beside it. Salvaged tools now go through the same scan.
- `markResponseRejected` resolves "the last response received for this method",
and the re-walk answers that same method — so the mark landed on a salvage
page that succeeded while the actually-invalid response rendered clean. The
correlation id is now captured before the re-walk.
- The report was cleared only on an explicit `disconnect()`. The route out that
tears down nothing (`onerror` with no `onclose`) carried it into the next
connection, so it is now cleared on the start-clean `resetSessionState()` path
as well.
Fixing the first exposed two more, both found by the new test:
- The modern (2026-07-28) codec validates a result against the spec schema
before the caller's, so a lenient `client.request` is rejected exactly as the
strict one was — there was no salvage on the modern leg at all. It now goes
through the raw-wire channel that exists for the modern `tasks/*` methods.
`withModernEnvelope` is split out of `withModernTaskEnvelope` so a list
request doesn't claim the tasks extension the user may have disabled.
- A malformed tool also blanked the SEP-2243 excluded set, leaving a tool that
vanished for an invalid header with no explanation — #1909's own complaint one
level down. The scan walk now tolerates a malformed sibling.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HDdo1rNRVQnVRRdsqSrvG3
Signed-off-by: cliffhall <cliff@futurescale.com>
The SDK validates a list result as a whole, so a single non-conforming entry
rejected the entire response and the panel showed "Couldn't load resources"
with zero items — the exact opposite of what a debugging tool should do with a
server that is 90% right. Reported against a PHP server whose empty
`annotations` object reaches the wire as `[]` rather than `{}`.
`listAll*` now falls back to a lenient re-walk when — and only when — the SDK
rejects a result it received (`InvalidResult` / `UnsupportedResultType`), keeps
the entries that validate, and reports the rest. A conforming server takes the
strict, cache-aware path exactly as before.
Salvaging is not accepting: the dropped entries are named with their reason in
a warning above the list, and the Protocol entry is still marked rejected, so
the wire truth survives. When every entry validates, the original error is
rethrown rather than swallowed — the rejection was about something the
per-item pass cannot explain.
`isClientDecodeRejection` moves to the new module and is now shared with
managedListState, which had the only copy.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HDdo1rNRVQnVRRdsqSrvG3
Signed-off-by: cliffhall <cliff@futurescale.com>
