| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
e026051b47 |
Era-aware connection model & capability gating (#1626) (#1697)
Some checks failed
Run install, format, lint, build, and test on every push / build (push) Has been cancelled
Run install, format, lint, build, and test on every push / publish (push) Has been cancelled
Run install, format, lint, build, and test on every push / publish-github-container-registry (push) Has been cancelled
* Era-aware connection model & capability gating (#1626) Make protocol era (SEP §7.8) a first-class, per-server connection dimension, orthogonal to the transport type, and drive the SDK Client's versionNegotiation from it. Config - Add `ServerProtocolEra` ("legacy" | "auto" | "modern"), `DEFAULT_PROTOCOL_ERA` (legacy, per the SDK's don't-auto-probe guidance), `MODERN_PROTOCOL_VERSION`, and `eraToVersionNegotiation()` in core/mcp/types.ts. - Persist `protocolEra` on `StoredMCPServer` / `InspectorServerSettings`, round-tripping through serverList.ts (omitting the default on disk) and the `/api/servers` read + write validators. InspectorClient / state - Thread `versionNegotiation` through `InspectorClientOptions` (default legacy), replacing the hardcoded pin. After connect, read `getProtocolEra()` / `getDiscoverResult()` / `getNegotiatedProtocolVersion()`, expose them via getters, dispatch `protocolEraChange` / `discoverResultChange`, and clear on disconnect. `useInspectorClient` surfaces `protocolEra` / `discoverResult`. Web UI - ServerSettingsForm: a Protocol Era selector bound to the per-server setting. - ConnectionInfoContent: era-aware — Era badge, Session ("Sessionless" on modern), and a Discovery section (supported versions + extensions) from the `server/discover` result. CLI/TUI also map the mcp.json `protocolEra` into versionNegotiation so the field applies uniformly. Version negotiation stays fully client-side; modern connect works over the existing remote tunnel and disconnect is sessionless (the SDK skips DELETE when there is no session id). Mcp-* header fidelity is left to the History/Network card. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01XNdjEPKLG637X8YmhDiEk5 * Address @claude review: era docstrings, era validation, stdio session label, AGENTS.md rule - Fix stale docstrings/comments in inspectorClient.ts, useInspectorClient.ts, inspectorClientEventTarget.ts, and ConnectionInfoContent.tsx: getProtocolEra() returns "legacy" (not undefined) on a plain legacy connect; it is undefined only when not connected. - Validate protocolEra at the storedFieldsToInspectorSettings read boundary (new shared isProtocolEra guard) so a hand-edited mcp.json read directly by the CLI/TUI drops an unknown era instead of passing it to eraToVersionNegotiation. Keeps the exhaustive switch intact. - ConnectionInfoContent: the Session row is HTTP-only — show "N/A (stdio)" for stdio instead of the misleading "Session-based". - AGENTS.md: add a rule against unjustified `as unknown as` double casts, and drop the one such cast introduced in the serverList test. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01XNdjEPKLG637X8YmhDiEk5 * Address re-review: dedupe isProtocolEra guard in remote server Replace the local isProtocolEra in remote/node/server.ts with the shared guard now exported from serverList.ts (already imported here), so the era literal set lives in one place and can't drift. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01XNdjEPKLG637X8YmhDiEk5 --------- Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
|
7fecebed5e |
OAuth: re-key store to (server, issuer) + SEP-837/2350/2352 auth UX (#1694)
Some checks failed
Run install, format, lint, build, and test on every push / build (push) Has been cancelled
Run install, format, lint, build, and test on every push / publish (push) Has been cancelled
Run install, format, lint, build, and test on every push / publish-github-container-registry (push) Has been cancelled
* OAuth: re-key store to (server, issuer) + SEP-837/2350/2352 auth UX (#1625) Re-key the persisted OAuth store to (server, issuer) and add the SEP-837/2350/2352 authorization-hardening UX. The SDK v2 auth() drives the SEP-2352 flow off the provider's ctx.issuer; the Inspector's job is to honor it and round-trip the issuer stamp. SEP-2352 — issuer-bound credentials - ServerOAuthState nests issuer-bound credentials under byIssuer[issuer] = { clientInformation, clientRegistrationKind, tokens }, with an activeIssuer pointer answering the transport's ctx-less per-request bearer read. - Fix a latent bug: OAuthStorageBase re-parsed tokens/client-info through OAuthTokensSchema/OAuthClientInformationSchema, which strip the non-RFC `issuer` field and silently defeat the SDK's discardIfIssuerMismatch. The store re-attaches the stamp from the byIssuer key. - BaseOAuthClientProvider threads ctx.issuer and implements discoveryState()/saveDiscoveryState() (activates the SDK's callback-leg AuthorizationServerMismatchError binding check) and invalidateCredentials(). - Lazy, migration-free upgrade: a legacy pre-1625 blob's top-level clientInformation/tokens are returned as an unkeyed fallback until the first issuer-stamped save promotes them into byIssuer. SEP-837 — application_type - DCR declares application_type: "native" (localhost Inspector). - ClientSettingsForm renders RegistrationRejectedError detail and reflects DCR's deprecated-in-favor-of-CIMD (SEP-991) status. SEP-2350 — step-up scope union - Per-server onInsufficientScope (reauthorize | throw) setting wired ServerSettingsForm -> StoredMCPServer.oauth -> StreamableHTTPClientTransport. - StepUpAuthModal visualizes the prior-union-challenged scope set, tagging each scope `new` vs `already granted`. mcpAuth simplification - Delete the hand-rolled authorizeWithoutRefresh (mishandled issuer stamping); forward forceReauthorization/skipIssuerMetadataValidation to native SDK auth() so both the initial and step-up paths get SEP-2352 stamping. Vocabulary + docs - OAuthStep gains cimd_fetch / issuer_comparison / scope_step_up (recorded on a step-up redirect); the Network tab labels auth requests by OAuth phase. - v2_auth_hardening.md gains an as-built status section. Deferred to the era-aware card: the SdkError(EraNegotiationFailed) -> UnauthorizedError unwrap and finishAuth(URLSearchParams) form (only fire under non-legacy negotiation). Closes #1625 Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * Address @claude review: issuer-stamp source gating + clear/activeIssuer + phase over-match - SEP-2352: stamp the issuer only when the credential actually came from the byIssuer slot (`fromSlot`), not merely when a slot exists. A partially-populated slot alongside a surviving legacy field would otherwise stamp a legacy (possibly cross-AS) credential with the current issuer, defeating discardIfIssuerMismatch. - Issuer-scoped clears no longer promote the cleared issuer to `activeIssuer` (updateIssuerSlot gains a `setActive` flag; save paths keep the promotion). - oauthNetworkPhase matches register/token/authorize as the final path segment (trailing slash tolerated) so `/token/refresh` or `/api/register/foo` no longer over-match. - Tests for all three. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
|
5de4e911e3 |
feat(web,core): enterprise-managed authorization (EMA) (#1509) (#1512)
Adds enterprise-managed authorization (EMA): browser-side IdP login + RFC 8693 token-exchange and JWT-bearer resource-token mint, per-server EMA opt-in in Server Settings, IdP config in Client Settings, and IdP clientSecret keychain storage. Includes the v2/main merge and review follow-ups (400 on malformed client config; normalizeIdpIssuer import consolidation). |
||
|
|
5ee347571f |
feat(web,core): persist & edit STDIO cwd/env in Server Settings (#1515) (#1518)
* feat(web,core): edit STDIO cwd/env in Server Settings (#1515) Persist and edit a STDIO server's working directory and environment variables through the Server Settings modal. - Add `env` (pair-array, mirrors headers) and `cwd?` to `InspectorServerSettings`. - `storedFieldsToInspectorSettings` lifts the stdio config's `env`/`cwd` into settings so the modal can show them; they stay on `config` for the transport. Add `envRecordToPairs` / `envPairsToRecord` helpers. - `env`/`cwd` remain config-owned on disk (the standard mcp.json location): the `/api/servers` PUT route writes an edited settings.env/cwd back onto the stored stdio config on a settings-only patch (supporting clear), and a config-providing PUT keeps config authoritative. `validateSettings` accepts `env`/`cwd`. - Server Settings modal: Working Directory field in Options and a dedicated collapsible Environment Variables section — both STDIO-only. - Registry server.json import sets no `cwd` (the schema has no working-directory concept); documented in serverJson.ts. Tests: serverList converter round-trip, route write-through (set/clear, config-precedence, non-stdio no-leak, validation), import preservation (client-config cwd, registry cwd skip), and form/modal component coverage. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * fix(web): preserve config env/cwd when a settings PUT omits them (#1515 review) Address Claude's review of #1518. - `/api/servers` PUT now distinguishes an *absent* `env`/`cwd` (preserve the stored value) from an explicit empty list / blank string (clear). Previously `validateSettings` coerced a missing `env` to `[]`, so an env-unaware caller patching only a timeout would silently wipe the server's env/cwd. The integrated web client always resends the full GET-rehydrated env, so it was unaffected — this protects the raw HTTP contract. - `validateSettings` reports `envProvided`/`cwdProvided`; the write-through only touches `config.env`/`cwd` for fields the caller actually sent. - On the omit path, rehydrate the untouched env's keychain values onto the rebuilt entry so the secret reconcile re-persists them rather than sweeping the blanked-on-disk keys out of the keychain. - Minor: guard the stdio cast in `mcpConfigToServerEntries` on the transport type instead of casting unconditionally. - Test: settings-only PUT omitting env/cwd preserves config keys + cwd + the keychain secret. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
|
97b1a7fbff |
feat(web,core): import client configs and registry server.json (#1348) (#1511)
* feat(web,core): import client configs and registry server.json (#1348) Wire up the two server-import affordances that were previously todoNoop: - Import config: source picker (Claude Desktop / Cursor / Cline / VS Code) read on the backend via a new GET /api/import-source, plus a file-upload fallback. Per-server review with import/skip on new servers and overwrite/skip/rename on id conflicts, then a per-server outcome summary. - Import server.json: parse the MCP registry single-server format (npm/pypi/oci packages + remotes, env vars, package/runtime args, URL template vars) into a runnable config, with a file picker and debounced live validation; Add Server is disabled until validation passes. Core gains an isomorphic import strategy layer (core/mcp/import) with a strategy registry, client-config + server.json parsers, a strategy-agnostic merge, and a dependency-injected source resolver. useServers exposes importSource(). Modal headers are bold and the redundant server.json section header is folded into the modal title. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * feat(web): collapse the server.json textarea into a File Contents disclosure Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * feat(web): auto-collapse File Contents disclosure after content loads Once content is pasted or a file is loaded, collapse the File Contents disclosure after ~1s with Mantine's built-in accordion animation, signaling the input was accepted and surfacing the validation/env-var sections. The disclosure becomes controlled by the modal; clearing the textarea re-opens it. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * feat(web): flash File Contents hover highlight before auto-collapse Before the File Contents disclosure auto-collapses, paint it with its hover background for 250ms, then run the collapse over a 325ms animation, so the collapse reads as intentional. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * feat(web): rename "Import server.json" to "Import from registry config" Rename the Add Servers menu entry and the modal header. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * feat(web): rename "Import config" to "Import client config" Rename the Add Servers menu entry and the modal header. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * refactor(web,core): move import orchestration into core helpers + web hooks Make the import logic reusable by CLI/TUI and keep the modals display-only: - core/mcp/import: add parseClientConfig (mcpServers→servers fallback), resolveServerId, selectServerJsonOption, and buildServerConfigForSelection, so the full import (parse → select → build → merge) is callable from any environment. - core/storage: extract the pure validateStoreId into a Node-free store-id module (store-io re-exports it) so the isomorphic import layer can validate ids without pulling Node deps into the browser bundle. - clients/web/hooks: useServerJsonImport and useImportClientConfig own all the wizard/parse/debounce/apply state; ServerImportConfigModal and ServerImportJsonModal are now thin display shells over the dumb panel. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * feat(web): rename "Import client config" to "Import from client config" Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * feat(web): remove the Cancel button from the registry import modal The modal header X (and Escape) still dismiss it; drop the redundant Cancel button (and the panel onCancel prop). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * feat(web): hide validation results + name override until content is present In the registry import modal, the Validation Results section and the Server Name override field stay hidden until something has been pasted/loaded into the textarea. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * feat(web): make Validation Results a collapsible disclosure Wrap the registry import modal's validation results in a Mantine accordion disclosure (default open), matching the File Contents section. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * feat(web): Server Name disclosure with read-only derived name + override Make Server Name a collapsible disclosure containing a read-only "From configuration" field (the id derived from the server.json name) and the editable Override field. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * feat(web): scroll to and highlight a freshly-added server After a manual add/clone or an import (client config / registry), the new server's card scrolls into view and draws an animated border (Mantine Border Animate); clicking anywhere on the card dismisses it. - App tracks highlightedServerId; addServerHighlighted sets it (edits and conflict-overwrites don't). Threaded through InspectorView -> ServerListScreen -> ServerCard. - ServerCard scrolls into view on highlight and wraps in <BorderAnimate>; onClick clears the highlight. - Pin @gfazioli/mantine-border-animate@2.0.3 (Mantine 8 compatible; 2.0.4+ requires Mantine 9). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * fix(web): highlighted card fills its cell and its controls work on first click - The BorderAnimate wrapper is display:flex, so the card was shrinking to content width while the border spanned the cell. Stretch the card with w=100% (and the wrapper). - Always render BorderAnimate and toggle show/animate instead of conditionally wrapping: swapping the element type on clear remounted the card, swallowing the click that triggered it (e.g. the connect toggle fired clear but not connect, needing a second click). Verified: one click now connects + clears. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * fix(web,core): address review — OCI env, untrack fixture, rename validation - Untrack the stray inspector-v1-multi.server.json (accidentally committed) and gitignore root *.server.json fixtures. - core/mcp/import/serverJson: forward declared env vars into OCI containers via '-e KEY' docker args (they previously only set the docker CLI process env); add a test. Clarify buildServerConfig (destructure env out instead of spread-then-delete) and document value-vs-default env handling. - useImportClientConfig: validate 'rename' targets inline (invalid charset / collision with existing, additions, or other renames) and gate the Import button on canImport; surface the error on the field. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * feat(web): highlight all servers from a batch import, not just the last Track highlighted servers as a set of ids instead of one. addServerHighlighted accumulates each id (a multi-server client-config import highlights them all); opening an add/import modal starts a fresh batch. Clicking a card clears only that card's highlight; only the first highlighted card scrolls into view. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
|
91f02fd6db |
feat(web): catalog vs read-only session launch model + apply --header (#1481, #1483) (#1496)
* feat(web): catalog vs read-only session launch model + apply --header (#1481, #1483) Per specification/v2_catalog_launch_config.md, `mcp-inspector --web` now selects the backend's server-list source and a session-wide writability, instead of seeding an inert `initialMcpConfig` the UI never read: - `--catalog <path>` (and `MCP_CATALOG_PATH`) → active WRITABLE catalog (seed/CRUD/watch), like the default catalog. - `--config <path>` → READ-ONLY session file: served in the UI but never written, seeded, or plaintext-secret-migrated — safe to point at a foreign config (e.g. claude_desktop_config.json). - ad-hoc `--server-url`/command (+ `--header`) → one server held IN MEMORY (no file written); `--header` is lifted onto the entry so the seeded connection actually uses it (closes the #1483 warn-only no-op). - nothing → default catalog (writable), unchanged. Backend (`createRemoteApp`): new `writable` + `initialServers` options. GET /api/servers branches three ways (in-memory / read-only file with no seed+no migrate / writable catalog); the four mutating routes return 403 when read-only; `/api/config` carries `writable`; the file watcher is skipped for in-memory sessions. `--catalog`/`--config` are mutually exclusive and neither combines with an ad-hoc target or `--header`; `--header` requires an ad-hoc HTTP/SSE server (clear errors otherwise — no silent no-op). UI: `useServerListWritable` reads `writable` from /api/config; the Servers screen hides add/edit/clone/remove/reorder/settings and shows a read-only banner when false. All new props default to writable=true (back-compatible). Docs: spec gaps G2/G3/G4 updated; launcher README documents the flags. Verified end-to-end against the built launcher: --config (writable:false, file byte-stable, mutations 403), ad-hoc --header (in-memory, header lifted), and --catalog (writable:true, POST persists). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * refactor(web): address review — Mantine <Code> in read-only banner, clarify watcher comment - Replace raw <code> with Mantine <Code> in the read-only-session Alert (repo convention: prefer Mantine primitives over raw HTML). - Add a comment near `watchable` clarifying that a read-only `--config` file is still watched on purpose (read-only blocks UI writes, not external observation; `writable` does not gate watching). Deferred (per reviewer): consolidating useSandboxUrl + useServerListWritable into one useConfig hook to avoid the duplicate /api/config fetch — optional follow-up. The redundant ad-hoc header type-guard is kept as defensive. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
|
53dc4549be |
fix(core): trace dropped fetch body update when entry rotates out (#1390) (#1480)
* fix(core): trace dropped fetch body update when entry rotates out (#1390) FetchRequestLogState.onFetchRequestBodyUpdate silently dropped a deferred response-body update when the matching entry had already been evicted by log rotation (>= maxFetchRequests newer requests appended between the append and the fire-and-forget body read). The user saw an empty Response Body with no way to distinguish "body never came back" from "body dropped after eviction". Plumb an optional pino logger into FetchRequestLogState (defaulting to the silent logger) and emit a logger.debug at the early-return site so the drop is traceable. The web client wires the existing remote logger from createWebEnvironment into the state manager. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * fix(core): emit dropped-body trace at warn level so it is observable (#1390) Review feedback: the web remote logger (createRemoteLogger) defaults to level 'info' with no override at the environmentFactory call site, so a logger.debug at the drop site is filtered out by both the pino level gate and transmit.level — the diagnostic never reaches /api/log and the drop stays invisible in the shipped web app, defeating the issue's goal. Promote the trace to logger.warn (>= info, so it transmits by default). A response body lost to log rotation is unexpected data loss, not routine diagnostic noise, so warn is the appropriate severity. Update the comment to explain the level choice and switch the test stub from debug to warn, extracting a small typed makeWarnLogger helper per review. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * feat(web): configurable Network Log Size per server + body-dropped toast (#1390) Turn the otherwise-invisible "response body dropped after rotation" case into an actionable signal: 1. Per-server `maxFetchRequests` setting (default 1000, 0 = unlimited), editable as "Network Log Size" in the first (Options) accordion section of the Server Settings form. Plumbed through the full settings pipeline: InspectorServerSettings + StoredMCPServer types, the serverList disk converters (read defaults to 1000, write omits the default to keep diffs minimal — 0 is a meaningful non-default), and the node server's GET-sanitize + write-side validateSettings (non-negative number). Applied live to the active connection on settings-modal close via a new FetchRequestLogState.setMaxFetchRequests (shrinking trims immediately), and at connect time for the next session. 2. FetchRequestLogState now emits a `fetchRequestBodyDropped` event, but only for genuine rotation drops (log at capacity with a finite cap) — not for benign post-clear stragglers or unlimited logs, which previously also hit the warn path. App shows a deduped, persistent toast (stable per-server id, no auto-close) explaining what happened and the likely causes, with a link that opens this server's settings on the Options section (modal remounts via key) so the user can raise the limit if it's just a high-traffic server. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * fix(web): don't treat a cleared Network Log Size field as unlimited (#1390) Review feedback: clearing the NumberInput emits "", and `parseInt("") || 0` coerced that to 0 (unlimited). Since the value applies live on modal close, a user who cleared the field to retype and then closed the modal would silently switch the log to unlimited. Fall back to the current value on an empty/NaN parse and reserve 0 for an explicit numeric entry. Adds a cleared-input test. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
|
b0a024269e |
feat(web): list-changed handling — indicator, pull-on-demand default, and per-server auto-refresh opt-in (#1402) (#1443)
* feat(web): wire the listChanged indicator across all screens (#1402) The per-screen list-changed indicator was hardcoded false in InspectorView for Tools, Apps, Prompts, and Resources, so it could never light up. Source it from the managed-state layer instead. Each ManagedXState now tracks a listChanged flag: set true when its */list_changed notification arrives (the existing auto-refresh leaves it set), exposed via getListChanged()/a listChangedChange event, and cleared by clearListChanged() or on disconnect. The useManagedX hooks surface the flag and clear it on a user-initiated refresh (the indicator's Refresh button = acknowledge). App threads the three flags to InspectorView, which maps them to the screens — Apps shares the tools flag since apps are a filtered view of tools. Tests cover set/clear/disconnect at the state-manager layer, the hook subscription + refresh-clears behavior, and the InspectorView routing (including Apps sharing the tools flag and no cross-wiring between screens). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * fix(core): close clear-after-await race in managed-list refresh (#1402 review) The useManagedX refresh() callbacks cleared the listChanged flag AFTER awaiting the fetch. If a */list_changed arrived mid-fetch, the state re-set the flag (and auto-refreshed), then the trailing clear wiped that genuinely-new signal. Clear BEFORE the await instead: the user's refresh acknowledges only the change in hand, and a mid-fetch change re-sets the flag and survives. Adds a race regression test on the tools hook. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * fix(web): drop duplicate Refresh on the Apps screen (#1402) AppControls uniquely had a standalone toolbar Refresh button AND the ListChangedIndicator on a separate row, so once the indicator could actually appear (this PR), the Apps screen showed two Refresh buttons. Match the other three controls (Tools/Prompts/Resources): the indicator is the single header-right refresh affordance. Updates AppControls and AppsScreen tests to assert exactly one Refresh (and none when the list hasn't changed). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * feat(core): stop auto-invoking */list on list_changed; user pulls via Refresh (#1402) With auto-refresh on, the list was already current by the time the list-changed indicator appeared, making its Refresh button moot. Now the managed Tools/Prompts/Resources state managers only flag the change on */list_changed (they no longer auto-refresh); the list stays as-is until the user clicks Refresh, which fetches the new list and clears the indicator. The connect-time initial load is unchanged. Resource templates (no own indicator, part of the Resources screen) also stop auto-refreshing; onRefreshResources now refreshes both resources and templates, since a single resources/list_changed covers both. Tasks are left auto-refreshing — they have no list-changed indicator and need live status updates. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * docs(core): correct ManagedResourceTemplatesState header comments (#1402 review) The class no longer subscribes to resourceTemplatesListChanged; update the stale file/class docstrings that still claimed it syncs on that notification to reflect connect + statusChange only. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * feat(web): add per-server 'Auto Refresh on List Changed Notifications' option (#1402) New Options section in ServerSettingsForm with a single checkbox. When checked, the managed Tools/Prompts/Resources (and resource templates) state auto-refreshes on */list_changed notifications; when unchecked (default) the notification only lights the list-changed indicator and the user pulls via Refresh. Plumbing: new optional autoRefreshOnListChanged on InspectorServerSettings and StoredMCPServer, round-tripped through serverList (lifted with a false default, persisted only when true, added to the exhaustive field-key map); surfaced from InspectorClient via a new getServerSettings() on the protocol; the state managers read it live at notification time to decide auto-refresh vs flag-only. Resource templates re-subscribe to their list_changed but only auto-refresh when the option is on (they have no indicator of their own). Tests cover the round-trip (true persists, false omitted), the form section (render/checked/toggle), and each state manager's on/off branch. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * fix(server): persist autoRefreshOnListChanged through validateSettings (#1402) The PUT /api/servers write path runs settings through validateSettings, which rebuilds the value from explicitly-named fields and silently drops unknown keys — so autoRefreshOnListChanged never reached disk (the serverList round-trip test passed because it calls inspectorSettingsToStoredFields directly, bypassing this path). Validate it as an optional boolean and include it in the built value; false is omitted on disk by inspectorSettingsToStoredFields as before. Adds integration tests over the real PUT path: true persists, false is omitted, and a non-boolean is rejected (400). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * feat(web): default the Server Settings modal to the Options section (#1402) Open 'Options' instead of 'Custom Headers' when the Server Settings modal first opens, so the new Auto Refresh toggle is the first thing surfaced. Updates the modal default-expanded section, the modal test's initial-state assertions, the three header tests (now expand 'Custom Headers' first since it's no longer open by default), and the story defaults. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * chore: drop accidentally-committed Inspector history dump; gitignore the class 83076441 swept an exported Inspector message-history JSON (manual-testing artifact at the repo root) into the tree via git add -A. Untrack it and extend the existing repo-root debug-artifact .gitignore block (alongside /*.png) to cover /inspector-history-*.json so these can't be re-added. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
|
49d6be6987 |
feat(web): add per-server Roots config + client roots capability (#1425) (#1431)
* feat(web): add per-server Roots config + client roots capability (#1425) Add MCP roots support to the v2 web Inspector as a per-server config section in the server settings form (no separate Roots tab/screen). - Persistence: add `roots: Root[]` to `InspectorServerSettings` and `StoredMCPServer`; thread through serverList converters (lift on read, drop empty-uri rows / blank names on write, omit when empty) and the remote server's read-side drop guard + `validateSettings`. - Capability: `setupClientForServer` always advertises the roots capability (`roots: cleanRoots(savedSettings?.roots ?? [])`) so the server can issue `roots/list` and receive `roots/list_changed`. - Live apply: edits to a connected server's roots are pushed via `inspectorClient.setRoots(...)` once, on settings-dialog close — diffed against the client's current roots — rather than per keystroke, to avoid flooding the server with `roots/list_changed` / `roots/list`. - Form: new Roots accordion section with a required URI and an optional name per row (unlike v1, which was URI-only), + Add Root, and remove. Tests cover the persistence round-trip (serverList + servers-route), the form/modal section, and reuse the existing InspectorClient roots/`setRoots` integration coverage. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * refactor(roots): address review — dedup guards/cleanRoots, preserve extra fields, test live-apply Responding to the PR #1431 code review: - Dedup `isRootArray`: drop the copy inside `validateSettings` and reuse the module-scope guard the read path uses, so the two can't drift (core/mcp/remote/node/server.ts). - Dedup the clean-roots normalizer: hoist a single exported `cleanRoots` into core/mcp/serverList.ts and reuse it from both `inspectorSettingsToStoredFields` and App.tsx (drops the local copy). - Preserve non-form root fields (e.g. `_meta`): `cleanRoots` now spreads the carried-through fields and only normalizes uri/name, and the modal's `handleRootChange` spreads the existing root on edit — so a hand-edited root's `_meta` survives load + persist + edit instead of being silently dropped. - Test the App live-apply-on-close path: new App.test.tsx cases assert setRoots is called once with cleaned roots when changed on the active server, and not called when the cleaned roots already match what the client advertises. Adds a cleanRoots unit test (blank drop + _meta preserve). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
|
037225a9fb |
feat(servers): move oauthClientSecret and stdio env values to OS keychain (#1356) (#1360)
* feat(servers): move oauthClientSecret and stdio env values to OS keychain (#1356) mcp.json is designed to be tool-shareable (symlinked from Claude Desktop's config, pasted into bug reports, synced via dotfiles), so storing OAuth client secrets and stdio env values in plaintext there meant any of those flows could leak them. Lift both into the OS keychain via @napi-rs/keyring (active replacement for the archived keytar). The wire shape is unchanged: the GET /api/servers handler rehydrates from the keychain so browser code sees the same JSON; the on-disk file no longer contains the secret material. Includes an idempotent migration that lifts plaintext from older mcp.json files (or hand-edited ones) into the keychain on first read. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * fix(servers): tolerate keychain unavailability on non-set ops (#1356) CI on Linux failed because `@napi-rs/keyring` hard-errors without libsecret, and the route handlers were touching the keychain even for no-secret flows (defensive `deleteAllForServer` on POST/DELETE, sweep on PUT). The user's intent for the Linux fallback was "hard fail when a secret is actually involved" — not on every keychain touch. Make `KeyringSecretStore.get / delete / deleteAllForServer` silently degrade when the keychain is unavailable (return null / no-op); `set` remains the one operation that hard-fails with `KeychainUnavailableError`. The migration path catches the error and preserves the disk plaintext rather than losing the secret. Also inject `InMemorySecretStore` in `useServers.test.tsx` and `servers-events.test.ts` so tests never touch a developer's real keychain even when libsecret is present. Adds `KeyringSecretStore` tests (vi.mock'd native bindings) and an integration suite that simulates Linux-without-libsecret to verify the tolerance contract end-to-end. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * fix(servers): close GET migration race; reverse keychain/disk order (#1356) Addresses code review: 1. **Concurrency**: GET /api/servers was reading + migrating outside the write lock, then writing inside it — a concurrent POST/PUT/DELETE between the read and the lock acquisition could be clobbered by the migration write. Also affected the first-launch seed write. Fix: take a fast unlocked peek; if the file is absent (seed branch) or carries plaintext to migrate (migration branch), re-read inside the write lock and decide there. Added `hasPlaintextSecrets()` as a pure predicate so the common no-migration path stays lock-free. 2. **Write ordering**: POST and PUT wrote disk first, then keychain. A keychain `set` failure mid-write left a half-configured entry on disk and trapped retries at 409. Reversed to keychain-first so a 503 leaves both stores in their pre-write state. PUT in-place now sets new fields, writes disk, then deletes obsolete fields (a failed disk write leaves orphan keychain entries — recoverable — rather than premature deletions of fields the user still expects to see). 3. **Tolerance simplification**: dropped the no-entry regex in `KeyringSecretStore.delete` — both "no entry" and "keychain unavailable" collapse to the same desired outcome (the entry isn't there anymore), so a uniform swallow is clearer. 4. **Parallelism**: `readKeychainEntriesFor` now `Promise.all`s the per-field `get` calls. macOS Keychain round-trips are 10-50ms; serializing 5+ env vars per server × N servers is a meaningful wall-clock cost on GET. 5. **Spec doc**: reflects the tolerance contract (only `set` hard-fails) and the keychain-before-disk write ordering rationale. New regression test in servers-route.test.ts covers the retry-after-503 contract directly. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * chore(servers): parallel keychain writes + migration partial-state comment (#1356) Two nice-to-have observations from the re-review: - `writeKeychainEntriesFor` now `Promise.all`s its per-field sets, matching the read side. No ordering requirement among distinct (id, field) keys; on unavailability every set rejects and Promise.all surfaces the first rejection (still 503 from the route handler). - `migratePlaintextSecrets` catch block now spells out the partial-migration semantics: we return the original config so the disk plaintext stays intact, and the next successful GET retries with the keychain-wins branch absorbing already-set entries. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * chore(servers): parallel keychain deletes for symmetry (#1356) Picks up the symmetry observation from the third review: `deleteKeychainFields` now uses `Promise.all` like its read and write siblings. Distinct (id, field) deletes have no ordering requirement, and `secretStore.delete` is already a silent no-op on unavailability so Promise.all has no failure-mode surprise. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com> |
||
|
|
a9df501856 |
feat(servers): flatten mcp.json settings to top-level fields (#1358) (#1359)
* feat(servers): flatten mcp.json settings to top-level fields (#1358) Eliminate the nested `settings` block introduced in #1352 so each server entry's Inspector-extension fields live as direct keys alongside `type` / `url`, matching the `.mcp.json` shape Claude Code / Cursor / Cline write: - `headers` becomes a `Record<string, string>` on disk (was nested `settings.headers` as a pair-array) - `oauth` becomes a nested `{ clientId?, clientSecret?, scopes? }` object (was flat `settings.oauthClientId` / `oauthClientSecret` / `oauthScopes`) - `metadata`, `connectionTimeout`, `requestTimeout` move to the entry's top level as-is (Inspector-only fields) The in-memory + wire shape is unchanged from #1352: `InspectorServerSettings` keeps pair-array `headers` and flat `oauth*` fields because the form needs them in that shape to drive controlled-component editing. The bidirectional conversion lives in `serverList.ts` (`storedFieldsToInspectorSettings` / `inspectorSettingsToStoredFields`) and is invoked by `mcpConfigToServerEntries` / `serverEntriesToMcpConfig` and by the server route's `buildStoredEntry`. The `PUT /api/servers/:id` wire envelope keeps the preserve/clear/apply semantics from #1353 — the backend splats validated `settings.*` onto top-level disk keys when assembling the next on-disk shape. Hard-cutover migration per the issue's decision 4: files written by the one pre-#1358 v2/main build have a nested `settings` block; we drop the node on read with a one-line warn including the server id. The persisted headers / metadata / timeouts / OAuth credentials are intentionally lost on first read — users re-enter them via the form (or hand-edit the file into the flat shape). v2 has not shipped a stable release with the nested shape, so the blast radius is dogfooders only. The smuggle-guard in `buildStoredEntry` widens from just `settings` to all six Inspector-extension keys (`settings`, `headers`, `metadata`, `connectionTimeout`, `requestTimeout`, `oauth`), so a caller can't bypass `validateSettings` by nesting any of them inside `config`. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * fix(servers): address PR review on flatten (#1359) - Single-source the Inspector-extension key list with `satisfies` (finding 1). `INSPECTOR_FIELD_KEY_MAP satisfies Record<keyof StoredInspectorFields, true>` in serverList.ts means a new field on the type forces a compile error here. The set is exported and re-used by the server route's smuggle guard, so adding `proxy` or similar in the future updates all three sites in lockstep. The PUT preserve path now uses a new `stripInspectorFields` helper that derives from the same source instead of hand-destructuring. - Add read-path shape validation in `normalizeMcpServers` (finding 2): `headers: "oops"` / `metadata: 42` / `oauth: []` / non-numeric timeouts are dropped individually with a warn, so a hand-edited malformed file can't put garbage rows into the form. Mirrors the write-side `validateSettings` symmetry. New integration test covers each malformed shape with a partial fixture so a single bad key doesn't take out the whole entry. - Align new warns to the `fileLogger || console.warn` fallback pattern (finding 3) via a small `logWarn` helper, so the legacy-drop and smuggle warns are visible in `npm run dev` where the logger is often unconfigured. - Spec doc tweak: the CLI/TUI out-of-scope note's "writes to `settings.headers`" reference now reads "writes to the entry's top-level `headers` field on disk (post-#1358 flat shape)" (finding 4). Avoids confusion for future readers. - Nits: replace `current.mcpServers[originalId]!` with explicit narrowing; add a comment on the OAuth truthiness drop in `storedFieldsToInspectorSettings` mirroring the write-side comment. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * fix(servers): address pass-2 review on flatten (#1359) - Tighten `isNonNegNumber` with `Number.isFinite` so `Infinity` and `NaN` are rejected at the read boundary, matching the write-side intent (finding D). Hand-edited `connectionTimeout: Infinity` would have passed the prior check and propagated to the form. - Add a one-line comment in `normalizeMcpServers` noting that the per-entry object is mutated in place via the `delete` calls — safe for today's callers (freshly parsed JSON, no other reference held) but worth flagging for the next reader (finding A). Skipping findings B (move type guards to module scope — single call site) and C (`isOauthObject` lenient on extra keys — reviewer confirmed this is the intended forward-compat behavior, matching `normalizeServerType`'s unknown-key passthrough). Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * docs(servers): fix mutation-comment caller branch label (#1359) The previous comment named the GET handler's "seed branch" as a caller of normalizeMcpServers, but that branch returns DEFAULT_SEED_CONFIG directly without normalizing. The actual second caller is the file-present branch (after parseStore). Correcting the label so a future reader looking for the seed branch caller doesn't waste time. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com> |
||
|
|
85a4b4c057 |
feat(servers): persist per-server settings to mcp.json (#1352) (#1353)
* feat(servers): persist per-server settings to mcp.json (#1352) - Add optional `settings` node alongside the transport config in each `~/.mcp-inspector/mcp.json` entry. Round-trips through `mcpConfigToServerEntries` / `serverEntriesToMcpConfig` and the `/api/servers` POST/PUT routes. - Drop `MCPServerConfig.headers` from `SseServerConfig` / `StreamableHttpServerConfig` and remove the headers textarea from `ServerConfigModal`. Custom headers are now entered only in `ServerSettingsForm` and reach the wire via `settings.headers`. - Wire `ServerSettingsModal` into `App.tsx`; saves dispatch through a new `useServers.updateServerSettings` mutator. `updateServer` carries the existing settings across config-only saves so they aren't dropped. - Apply settings on the *first* outbound request after a server loads — no need to open the settings form first: - `settings.headers` → SSE / streamable-http wire headers. - `settings.metadata` → `InspectorClientOptions.defaultMetadata`, merged into every outgoing `_meta` (call-time keys win). - `settings.requestTimeout` → `InspectorClientOptions.timeout`. - `settings.connectionTimeout` → Promise.race wrapper around connect(). - `settings.oauth*` → pre-seeded OAuth client credentials. - `RemoteConnectRequest` carries `settings` so the remote backend can source transport headers from the same source as the local path. - `oauthClientSecret` is persisted in `mcp.json` alongside stdio `env` values, both protected by the file's `0o600` permission. - Update `specification/v2_servers_file.md` with the new shape and the removal of the legacy headers field. Tests: round-trip in `serverList.test.ts`; persistence on POST/PUT in `servers-route.test.ts`; first-connect header injection in `transport.test.ts`; `defaultMetadata` merging in `inspectorClient.test.ts`; `useServers.updateServerSettings` + `updateServer` settings-preservation in `useServers.test.tsx`. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * fix(servers): rebuild InspectorClient on every connect so settings refresh The previous onToggleConnection branch reused the existing InspectorClient on a same-server reconnect, which froze settings at the moment the client was first constructed. Editing headers, metadata, timeouts, or OAuth credentials in the settings form was therefore invisible until the user either switched servers or reloaded the page — surprising right after a visible save. Always call setupClientForServer on (re)connect so the latest target.settings flow through to the transport's headers / requestInit, to defaultMetadata, and to the OAuth manager. Also adds remoteClientTransport tests that pin the wire-level contract: settings round-trip through the /api/mcp/connect body when supplied, and the field is omitted when no settings are configured. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * fix(history): stop wiping pendingRequestEntries inside the connect event State managers (ManagedToolsState, ManagedPromptsState, ManagedResourcesState, ManagedResourceTemplatesState, ManagedRequestorTasksState) handle the client's "connect" event by calling `void this.refresh()`. The synchronous portion of refresh runs through SDK Protocol.request → transport.send → MessageTrackingTransport.send → trackRequest, all before yielding to the network — so each list request gets tracked into MessageLogState's pendingRequestEntries inside the same connect event dispatch. MessageLogState's own "connect" listener was registered after those state managers (it's the last one constructed in App.tsx) and cleared pendingRequestEntries on every connect. Listener order meant the clear ran *after* the requests were tracked but before their responses arrived, leaving the history with unmatched "response" entries marked PENDING. The clear-on-disconnect (via statusChange → disconnected) already handles session-boundary cleanup, so clear-on-connect was purely defensive and now actively harmful. Drop the connect listener; keep the disconnect path. Tests: updated the unit test to assert the new behavior (connect does not clear); added an integration regression that wires a sibling connect listener firing listTools and asserts the response folds into the request entry instead of appearing as an orphan. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * chore: drop accidentally tracked debugging screenshot pending-requests.png was a local debugging artifact attached to a conversation, not source. Remove it from the tree (the working copy is kept so the user still has it locally) and rely on the existing untracked behavior going forward. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * test(servers): add e2e check that settings.headers reach upstream MCP Stitches the full v2 pipeline together in one assertion: browser-style RemoteClientTransport → POST /api/mcp/connect (settings in body) → backend createTransportNode applies settings.headers to requestInit → SDK StreamableHTTPClientTransport → upstream MCP test server Captures the upstream HTTP request via FetchRequestLogState and asserts both `X-Tenant` and `X-Trace` are present on the outbound POST. Catches any regression that breaks the wire between the form and the upstream server in a single integration test, instead of the previous coverage which exercised each hop in isolation. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * fix(ServerSettingsModal): invert ListToggle compact prop so icon matches state ListToggle's `compact` prop represents the list's *current* compact state: true means "currently compact" and renders the expand icon to advertise the action (open up). The settings modal was passing `compact={allExpanded}` — exactly inverted. When all sections were open it showed the expand icon (suggesting "open more") and when collapsed it showed the collapse icon, opposite of every other ListToggle caller in the app. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * style(HistoryListPanel): match ServerListScreen Export button — rename + default variant Renames "Export JSON" to "Export" and switches from the subtle ToolbarButton to the same `Button variant="default"` used by ServerListControls so the two Export affordances look identical across screens. Also moves the button to the right of the ListToggle (mirroring the order on the server list screen) and disables it when there are no entries to export. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * style(HistoryListPanel): move Clear button to top toolbar, match Export style Moves the Clear affordance out of the "History (N)" section header and up to the panel toolbar alongside Export, where it now uses the same `Button variant="default"` styling. Order in the toolbar is now: ListToggle · Clear · Export. Clear is disabled when there are no unpinned entries to remove (pinned entries are intentionally preserved). ToolbarButton helper is unused after this change and dropped. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * chore: ignore local debugging screenshots at repo root Stops `git add -A` from re-staging the `*.png` files Claude Code drops at the repo root from attached conversation screenshots. The pattern only matches the top-level (`/*.png`) so legitimate image assets in subdirectories (e.g. `clients/web/public/`) still get tracked when explicitly added. Also untracks the two screenshots that slipped through previously (initialize-request.png, pending-requests.png). Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * style(LogStreamPanel): match HistoryListPanel button styling Clear / Export / Copy All on the Logging screen were rendered with the subtle ToolbarButton helper while History's equivalents use `Button variant="default"`. Switch all three to the default variant so the toolbars look identical across screens and mirror the disabling behavior — each button is now disabled when `entries.length === 0`. ToolbarButton helper is unused after this change and dropped. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * fix(servers): address PR review — debounce save, preserve-on-omit PUT, validate shape, lift connect timeout Round-up of fixes from https://github.com/modelcontextprotocol/inspector/pull/1353#issuecomment-4526861959: 1. ServerSettingsModal saves were firing on every keystroke (one PUT + full mcp.json refresh per character). App.tsx now debounces by 300ms and flushes on modal close so a burst of edits coalesces into one PUT and the form value can't flicker back mid-typing. 2. `PUT /api/servers/:id` with an omitted `settings` field used to silently wipe the persisted settings node. The route now treats the three intents distinctly: - field omitted → preserve existing on-disk settings - explicit null → clear the settings node - settings object → validate + apply `useServers.updateServer` is simplified to drop the client-side carry-through hack, and the test that documented the broken behavior is flipped + augmented with explicit-clear and bad-shape cases. 3. `connectionTimeout` Promise.race is moved from App.tsx into `InspectorClient.connect()`, reading `this.serverSettings?.connectionTimeout`. TUI/CLI consumers now get the same behavior; on timeout the client internally disconnects so the next connect starts clean. 4. Custom Headers hint in `ServerSettingsForm` notes that `Authorization` is owned by the OAuth flow when OAuth is configured — avoids the sharp edge where the SDK's authProvider silently overwrites a user-set Authorization header. 5. New `validateSettings` on the server route rejects malformed shapes (`settings: []`, `settings.headers: "oops"`, non-numeric timeouts, etc.) with 400 instead of letting them persist and crash the UI. 7 (nit). Renamed `settings` → `savedSettings` inside `setupClientForServer` so the variable holding the persisted settings doesn't shadow the later locally-derived values. Follow-ups opened separately: #1356 — Move oauthClientSecret out of mcp.json into the OS keychain (review #6). Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * fix(servers): address PR review pass 2 — connect-timeout test, unmount cleanup, tagged intent, lenient settings read Pass-2 review at https://github.com/modelcontextprotocol/inspector/pull/1353#issuecomment-4527089705: (a) New integration test pins the new client-layer connect-timeout contract: a hanging stub transport with `connectionTimeout: 50` rejects with the descriptive error and lands the client in "error" status. Documents what TUI/CLI consumers should expect from the lifted Promise.race in InspectorClient.connect(). (b) useEffect cleanup clears `pendingSettingsTimerRef` on unmount so a route change or HMR mid-debounce can't fire one stale PUT against an unmounted component. (c) Refactor the PUT-route `settingsIntent` discriminator from `"preserve" | "clear" | { value }` to a tagged union with `kind`, and consume it with a `switch` for exhaustiveness — reads cleaner and makes adding a fourth intent painless. (d) `normalizeMcpServers` now runs `validateSettings` on the on-disk settings node and silently strips it if invalid, mirroring the existing lenient-on-read pattern from `normalizeServerType`. Closes the read/write asymmetry where a hand-edited malformed `settings` could survive on disk and get carried through preserve-on-PUT. New route test pins the strip-on-GET + no-propagate-on-preserve-PUT behavior. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * fix(servers): pass-3 review — patch-style PUT, toast on close-flush fail Pass-3 review at https://github.com/modelcontextprotocol/inspector/pull/1353#issuecomment-4529276897. (b) `PUT /api/servers/:id` now treats both `config` and `settings` as optional patches: - field omitted → preserve the on-disk value - explicit body value → apply - settings: null → clear `updateServerSettings` stops reading `existing.config` from the in-memory `servers` snapshot, which closes the closure-capture hazard where a refresh between debounce-schedule and flush could silently revert a separate edit. The route is the single source of truth for transport config now. New tests cover settings-only PUT, rejected non-object config, and the empty-body no-op patch case. The previous "rejects a missing config" test is rewritten to document the new no-op-preserve semantics. (c) Inline comment near the PUT rebuild loop documents that writing the full mcpServers map back is what gives the route its desirable self-healing property for malformed settings on *other* entries — deliberate side-effect, not an accident of normalization. (d) `flushPendingSettings` surfaces failures via @mantine/notifications instead of swallowing them. The modal already closed by the time the flush PUT resolves, so a silent fail would leave the user thinking their last edits saved (especially painful for the OAuth client secret). The notifications wiring was already mounted in main.tsx. Pass-3 (a) — settings form being effectively uncontrolled mid-edit — is acknowledged in the reply: working as intended today; the proper fix is internal modal state when file-watching (#1345) forces the issue. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * fix(servers): pass-4 review — strip smuggled settings out of config Pass-4 review at https://github.com/modelcontextprotocol/inspector/pull/1353#issuecomment-4529861349. Main finding: `normalizeServerType` spreads unknown keys, so a body that nested `settings` inside `config` would smuggle a settings field onto the stored entry without ever passing through `validateSettings`. Strip the settings key off the incoming config in `buildStoredEntry` so `validateSettings` remains the single write path for the settings node — the "one source of truth" invariant pass 2 set up holds again. Two new tests pin the strip on both routes: - POST with `config.settings = { bogus }` lands an entry with no settings node on disk. - PUT with `config.settings = { bogus }` + `settings: null` clears the real settings *and* doesn't re-attach the bogus payload via the spread. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * fix(servers): pass-5 review — absorb late connect rejection, tighten validateSettings, log smuggle warning Pass-5 review at https://github.com/modelcontextprotocol/inspector/pull/1353#issuecomment-4529954490. Main finding: when the connect-time `Promise.race` lost to the timeout, the original `this.client.connect(this.transport)` promise was left pending. After `disconnect()` tore the transport down, real transports (SSE / streamable-http) would reject that promise later — with no handler attached, producing a Node `unhandledRejection` (and a vitest suite warning). Attach a no-op `.catch` right after creating the connect promise so Node sees the late rejection as handled. Nit (a): `validateSettings` was casting the raw object through to `InspectorServerSettings`, which let unknown keys ride along onto disk. Replaced the cast with an explicit pick-and-build over the known fields. Unknown stowaways now silently drop on the way through. New route test pins the behavior. Nit (b): `buildStoredEntry` now logs a `warn` via the route's pino logger when an incoming `config` carries a `settings` key. The strip is still defensive (it isn't a documented contract) but the warning lets a misconfigured client find out about the wasted field instead of debugging a silent drop. Nit (c) — the defensive `?? {}` fallback in `buildStoredEntry` — acknowledged in the review reply; left in place as belt-and-braces. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * fix(servers): pass-6 polish — scope absorber, thread id, drop empty OAuth, guard `in` Pass-6 review at https://github.com/modelcontextprotocol/inspector/pull/1353#issuecomment-4529979135. Reviewer signed off as ready; landing the four marginal cleanups since they're all small. (a) `connectPromise.catch(() => {})` moves inside the `if (connectTimeoutMs > 0)` branch. The await-only path propagates rejection cleanly through the outer try/catch — the absorber is only needed when the race leaves the original promise unattended. Code now reads as "absorber is tied to the race," which is the real invariant. (b) Thread `id` (POST id, PUT newId) through `buildStoredEntry` and include it in the smuggle warning's pino bindings. Two clients smuggling simultaneously are distinguishable in the log instead of indistinguishable. (c) `validateSettings` coerces empty-string OAuth fields to absent. The form emits `""` when the user clears an input, and an empty `oauthClientId` on disk would later be misread as "OAuth configured." New route test pins it. (d) `buildStoredEntry` adds a null/object guard before `"settings" in configObj`. The route layer pre-checks this on POST and PUT, but the helper's `unknown` parameter is a weak contract; the guard makes it safe to call from anywhere. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * docs(spec): reflect settings persistence + patch-PUT contract in v2_servers_file The doc was authored when `mcp.json` only stored the server list. Bring it forward to match what shipped in #1352 / PR #1353: - Summary calls out that the file also stores per-server settings and links into the Per-server settings section. - On-disk format note explains that `settings` is an optional Inspector- specific extension that other MCP tools ignore. - New top paragraph on the Per-server settings section explains the basic-config / settings UI split rationale (simpler form for the common case, advanced settings tucked behind a second dialog). - UI bullet is rewritten to match the patch-style PUT semantics that emerged across the review cycle: settings-only and config-only PUTs preserve their counterpart inside the write lock, so neither modal can silently clobber the other half. The earlier "must re-send settings on PUT" hack is gone. - New bullets capture the save cadence (300ms debounce + flush-on-close + failure toast), the patch-PUT contract (omit-preserve / null-clear / rename), and the write-path / read-path validator gates. - Secret storage bullet links to #1356 (OS-keychain follow-up). Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * docs(spec): show a third entry with the optional settings node The On-disk format example demonstrated only basic stdio entries. Add a streamable-http entry with a populated `settings` node so readers can see the shape inline rather than having to scroll to the Per-server settings section. Inline comment in the block cross-links there for the full contract and notes that other MCP tools ignore the extension key. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com> |
||
|
|
db1916cd34 |
feat(servers): persist server list to ~/.mcp-inspector/mcp.json (#1343) (#1349)
* feat(servers): persist server list to ~/.mcp-inspector/mcp.json (#1343) Replaces the hardcoded SEED_SERVERS in App.tsx with a file-backed list at ~/.mcp-inspector/mcp.json. Full CRUD round-trips through new /api/servers routes; first launch writes the two existing seeds if the file is absent. Backend (core): - store-io: getDefaultMcpConfigPath() — sibling of getDefaultStorageDir() - core/mcp/serverList.ts: pure converters MCPConfig <-> ServerEntry[], DEFAULT_SEED_CONFIG, and normalizeServerType (moved from node/config.ts to keep serverList.ts Node-free) - core/mcp/remote/node/server.ts: GET/POST/PUT/:id/DELETE/:id /api/servers routes, plus RemoteServerOptions.mcpConfigPath defaulting to getDefaultMcpConfigPath(). Ids validated with validateStoreId. Frontend: - core/react/useServers.ts: { servers, loading, error, refresh, addServer, updateServer, removeServer } over the new endpoints - App.tsx: drops SEED_SERVERS, wires useServers, disconnects on remove of the active server, follows id on rename of the active server - ServerConfigModal: Add/Edit/Clone form (stdio: command/args/env/cwd; sse/streamable-http: url/headers as one-per-line text) - ServerRemoveConfirmModal: confirm-on-remove with id + transport summary Tests (52 new): - unit: getDefaultMcpConfigPath env-var permutations, serverList round-trip, hook flows against real Hono app.fetch (no TCP), modal forms + validation - integration: /api/servers routes against a real createRemoteApp + tmp file - stories with play functions for both new modals Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * fix(servers): address PR #1349 review (correctness + nits) Bugs: - normalizeServerType: validate against the allowed set and default unknown / non-string types to "stdio" (matches the missing-type case). Prevents a hand-edited {"type":"websocket"} from leaking past `as ServerType` and surprising downstream narrowing. - onConfirmRemove: when removing the active server, also destroy() the 9 state managers and null them + the client out so they GC immediately instead of waiting for the next server switch. - /api/servers mutating routes: serialize POST/PUT/DELETE through an in-process write-lock so concurrent read-modify-write cycles can't lose updates. New integration test fires 25 parallel POSTs and asserts every entry lands. - readMcpConfig comment: update to match actual behavior (valid-JSON file with no `mcpServers` → empty; invalid JSON → 500 from the outer try, so corruption surfaces rather than silently emptying the list). New integration tests pin the 500 path on both GET and POST. Nits: - Add --inspector-surface-subtle token, use it in ServerRemoveConfirmModal instead of the raw Mantine var. - Rename useServers buildHeaders boolean param to includeJsonBody. - Add a comment on the env-value vs header-value trim asymmetry (env values preserve trailing whitespace; header values follow RFC 7230). Tests: 1630 unit + 404 integration + 306 storybook all green. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * fix(ServerConfigModal): null currentTarget in functional setState updater React nulls SyntheticEvent.currentTarget after the synchronous handler returns. Reading e.currentTarget.value inside `setForm((f) => ...)` worked under happy-dom (which keeps currentTarget around) but threw "Cannot read properties of null (reading 'value')" on the first keystroke in a real browser. Capture the value before the functional updater closes over it. All seven onChange handlers in ServerConfigModal had the bug. Extended the AddEmpty storybook play to type into Server ID and Command — the real-Chromium runner now exercises this path so a future regression fails the test suite instead of the user. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * fix(remote-server): surface stderr + transport_error when subprocess crashes during startup A stdio subprocess that spawns successfully but exits before the browser opens the SSE events stream used to vanish into a bare "Session not found" 404. The fix has three parts: 1. RemoteSession.markTransportDead always pushes the transport_error event (via pushEvent's queue) rather than dropping it when no consumer is attached. The queued event drains when the consumer eventually arrives. 2. /api/mcp/connect's transport.onclose handler no longer deletes the session immediately when no consumer is attached. Instead it holds the session (with queued stderr + transport_error) for a 30s grace window so the events endpoint can drain it. A timeout sweeps if no consumer ever connects. 3. /api/mcp/events detects isTransportDead after attaching the consumer (which just drained the queue), yields once to flush, then closes the stream and deletes the session. End result: the user sees the actual error (e.g. "Cannot find module" from stderr + the transport-closed reason) instead of a confusing 404. Tests: - New unit tests (clients/web/src/test/integration/mcp/remote/remote-session.test.ts) cover the queueing behavior, live delivery, and clearEventConsumer signaling under all transport-state permutations. - New integration test (connect-crash.test.ts) spawns a node subprocess that writes to stderr and exits, then verifies the events stream delivers both the stderr line and the transport_error event before closing — the exact scenario from PR #1349. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * fix(state): gate listRequestorTasks on the server's `tasks` capability ManagedRequestorTasksState was calling tasks/list on every connect. Servers that don't advertise the `tasks` capability (the common case) reply with -32601 "Method not found", which then surfaces in the inspector's console for every connect. Skip the call when the server doesn't declare `tasks` — empty tasks list is the right semantics. Existing tests opt into capabilities so the live-path coverage is preserved; two new tests pin the gated behavior (direct refresh + connect-event-triggered refresh). Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> * fix(App): clear activeServerId on disconnect so other server cards re-enable ServerCard dims any card whose id differs from `activeServer` (and marks it inert), so cards stay non-interactive after a disconnect until the user reconnects elsewhere. activeServerId was set on connect but never reset on disconnect, leaving the whole screen locked to the just- disconnected card. Subscribe to InspectorClient's `disconnect` event and clear activeServerId there. Covers all three disconnect paths uniformly: - user toggles the connected card off - user clicks the header Disconnect button - mid-session transport failure (subprocess exit / network drop) Event-based instead of effect-based on connectionStatus to avoid the first-render-clobbers-new-id trap (status starts as "disconnected" for a freshly-created client before connect() runs). Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com> |
| Author | SHA1 | Date | |
|---|---|---|---|
|
|
e026051b47 |
||
|
|
7fecebed5e |
||
|
|
5de4e911e3 |
||
|
|
5ee347571f |
||
|
|
97b1a7fbff |
||
|
|
91f02fd6db |
||
|
|
53dc4549be |
||
|
|
b0a024269e |
||
|
|
49d6be6987 |
||
|
|
037225a9fb |
||
|
|
a9df501856 |
||
|
|
85a4b4c057 |
||
|
|
db1916cd34 |