## Motivation and Context
The MCP 2025-03-26 authorization spec predates Protected Resource Metadata:
the MCP server itself acted as the authorization base URL, its RFC 8414 metadata was fetched from
the server origin, and the spec's "Fallbacks for Servers without Metadata Discovery" section
required clients to use the default endpoints `/authorize`, `/token`, and `/register` relative to
the authorization base URL when no metadata was published. Both the TypeScript SDK
(`discoverOAuthServerInfo` falls back to the server base URL on PRM failure; `startAuthorization` /
`executeTokenRequest` / `registerClient` default the endpoint paths) and the Python SDK
(`build_oauth_authorization_server_metadata_discovery_urls(None, ...)` plus the same endpoint defaults)
keep this as client-side backwards compatibility, and the `auth/2025-03-26-oauth-metadata-backcompat` and
`auth/2025-03-26-oauth-endpoint-fallback` conformance scenarios exercise it.
The Ruby flow previously raised as soon as PRM discovery failed, so both scenarios were
expected conformance failures. This change adds the same fallback:
- `Flow#locate_authorization_server` first attempts PRM discovery; on any discovery failure
(404s, network errors, malformed documents, matching the TypeScript and Python SDKs' broad fallback)
the MCP server's origin becomes the legacy authorization base URL. The Communication Security check
(HTTPS or loopback) still applies to that origin, and PRM documents that parse correctly keep
their strict shape validation.
- `Flow#authorization_server_metadata` fetches RFC 8414 metadata from the base URL.
On the legacy path the `issuer` byte-match is skipped: the 2025-03-26 spec predates that requirement,
and a pre-PRM server may host its OAuth endpoints under a path prefix whose `issuer` legitimately differs
from the discovery origin (neither reference SDK validates the issuer on this path). On the modern path
the byte-match is unchanged.
- When even the metadata document is absent, synthetic metadata carrying the legacy spec's default endpoints
is used, with PKCE S256 assumed (the legacy spec mandates PKCE; the TypeScript and Python SDKs hardcode S256
on this path too). Endpoint HTTPS checks still apply.
- `run!` and `refresh!` share the new discovery helpers, and both 2025-03-26 scenarios are removed from
`conformance/expected_failures.yml`.
## How Has This Been Tested?
New tests in `test/mcp/client/oauth/flow_test.rb`:
- the metadata-backcompat shape: no PRM, AS metadata at the server origin with `/oauth`-prefixed endpoints
and a mismatched `issuer` completes the flow against those endpoints (no issuer error)
- the endpoint-fallback shape: no metadata at all registers, authorizes, and exchanges the code at `/register`,
`/authorize`, and `/token` on the origin, still sending `code_challenge` (S256) and `code_verifier`
- a remote plain-http origin is rejected as the legacy authorization base
- strict-mode regression: with PRM present, a mismatched `issuer` still aborts the flow
- a malformed PRM (top-level JSON array) now selects the legacy path instead of leaking a `TypeError`,
and surfaces a domain error when that path also dead-ends
Two existing tests that asserted PRM failure was terminal were updated to dead-end the legacy path explicitly,
preserving their original intent (single flow attempt, domain error type).
## Breaking Changes
None for spec-compliant 2025-06-18+ servers, whose PRM-based discovery and issuer validation are unchanged.
Servers that previously failed hard during PRM discovery now get one legacy discovery attempt before the flow errors,
which can only turn previously failing flows into working ones.
## Motivation and Context
SEP-2567 (modelcontextprotocol/modelcontextprotocol#2567, merged for the 2026-07-28 spec release)
makes MCP sessionless: every Streamable HTTP POST must be fully self-contained,
with no protocol-level session state shared between requests.
`StreamableHTTPTransport` already implements the SEP's transport surface via
`stateless: true` (no `Mcp-Session-Id` issued or required, GET returns 405,
DELETE is a no-op, server-to-client requests raise), but its dispatch had a state leak:
stateless POSTs were handled with `session: nil`, so `Server#init` wrote `@client` and
`@client_capabilities` onto the shared `Server` instance.
Concurrent stateless requests could therefore observe another client's identity,
and the data persisted across requests, which is exactly what SEP-2567 forbids.
The TypeScript SDK's stateless prototypes (the closed typescript-sdk#2058/#2131/#2251 stack)
solve this with per-request dispatch; this change applies the equivalent fix within the existing architecture:
- Stateless `handle_initialization`, `handle_regular_request`, and `dispatch_notification` now
run handlers against an ephemeral per-request `ServerSession` (with `session_id: nil`),
so client info, logging level, and initialized state live only for the duration of that POST.
Repeated `initialize` requests are naturally permitted because each POST gets a fresh,
never-initialized session.
- `send_notification` in stateless mode now returns `false` (non-delivery) instead of raising.
With ephemeral sessions in place, a tool calling `server_context.report_progress` or `notify_log_message`
would otherwise route every call into the exception reporter; non-delivery matches how
these helpers already degrade when no session exists. `send_request` (server-to-client requests) still raises,
as those are genuinely unsupported without a stream.
Resolves#388.
## How Has This Been Tested?
New tests in `test/mcp/server/transports/streamable_http_transport_test.rb`:
- a stateless `initialize` POST leaves `Server#client_capabilities` and the server's `@client` untouched
(the leak regression)
- repeated `initialize` POSTs both succeed with 200 and no `Mcp-Session-Id` header
- a tool calling `server_context.report_progress` under stateless mode returns its result normally and
the exception reporter is never invoked
- the existing "stateless mode does not support server-sent events" test is updated to assert
the new `false` return instead of the removed raise
All other existing stateless-mode tests pass unchanged.
## Breaking Changes
`StreamableHTTPTransport#send_notification` in stateless mode now returns `false` instead of raising `RuntimeError`.
The raise message was not a documented contract, broadcasting in stateless mode was always a non-deliverable operation,
and the boolean return matches the method's documented semantics in every other non-delivery case.
Default (session-oriented) mode is unchanged.
## Motivation and Context
The transports parse incoming JSON with `symbolize_names: true`, so a tool receives every key,
at every nesting level, as a Ruby symbol. The dispatch in `call_tool_with_args` only runs
a shallow `transform_keys(&:to_sym)`, which is effectively a no-op given the deep parse upstream.
Nothing in the SDK exercised that delivered shape: the README and examples take flat or primitive arguments,
and the tool tests invoke `call` with Ruby keyword arguments, so none go through the JSON parse to dispatch path.
A tool that reads a nested object with string keys (`payload["subject"]`) therefore passes its tests and then
returns nil against a real client.
Ruby keyword arguments bind only on symbol keys, so the top-level keys must be symbols for
the ergonomic `def call(message:, ...)` API to work. Aligning fully with the JSON wire shape that the spec and
the Python and TypeScript SDKs use (string keys) is not possible without a breaking change to that API.
This change therefore documents the existing contract rather than altering behavior.
Closes#412
## How Has This Been Tested?
New regression tests in `test/mcp/server_test.rb`:
- `tools/call` through the full `handle_json` path delivers nested object arguments with symbol keys at every level,
and string-key access on a nested value returns nil.
- A tool called under the JSON-round-tripped argument shape receives symbol keys, mirroring what a transport hands it at runtime.
## Breaking Changes
None. This is a documentation and test change with no behavior change.
The `lib/mcp/server.rb` edit is a clarifying comment on the existing key handling.
## Additional context
Making nested objects tolerant of both string and symbol keys (indifferent access) is a possible future improvement
that would remove the footgun and move closer to the other SDKs. It is intentionally left out of scope here and
can be designed separately, since it is a behavior and dependency decision rather than a documentation fix.
## Motivation and Context
The MCP specification constrains `Annotations.priority` to the 0–1 range
(`@minimum 0`, `@maximum 1`), but the Ruby SDK accepts any value. The other
official SDKs already enforce this (TypeScript, Python, and PHP).
This follows the existing pattern in `MCP::Icon`, which validates its
constrained `theme` value in the constructor and raises `ArgumentError`.
## How Has This Been Tested?
Added tests in `test/mcp/annotations_test.rb`:
- valid `priority` at the lower (0) and upper (1) bounds is accepted
- out-of-range `priority` (above 1, below 0) raises `ArgumentError`
The full unit suite and RuboCop pass locally.
## Breaking Changes
Strictly speaking yes: a caller that currently passes an out-of-range
`priority` (e.g. `priority: 99`) will now get an `ArgumentError`. Such values
already violate the MCP specification, and `nil` / in-range values are
unaffected.
## Motivation and Context
SEP-837 (modelcontextprotocol/modelcontextprotocol#837, merged for the 2026-07-28 spec release)
updates the authorization spec to require MCP clients to specify an appropriate OIDC `application_type`
(`"native"` vs `"web"`) during Dynamic Client Registration, so the authorization server can apply
the matching redirect URI policy and native and web clients do not collide on redirect URI validation rules.
This mirrors the approach taken by the TypeScript SDK (typescript-sdk#2266) and the Python SDK (python-sdk#2784):
- `MCP::Client::OAuth::Discovery.infer_application_type(redirect_uris)` returns `"native"` when every redirect URI
is a native-app URI (a custom non-http(s) scheme per RFC 8252 Section 7.1, or an http(s) URI with a loopback host
per RFC 8252 Section 7.3) and `"web"` otherwise, including for nil, empty, or unparseable input.
Loopback detection reuses the existing `loopback_host?` helper, so lookalike hosts such as `localhost.example.com`
or `127.attacker.com` are not treated as native.
- `Flow#ensure_client_registered` now posts the metadata through the new `registration_client_metadata` helper,
which merges the inferred `application_type` into the DCR request body only when the user did not set
one explicitly (symbol or string key); an explicit value always wins.
Resolves#375.
## How Has This Been Tested?
New tests in `test/mcp/client/oauth/discovery_test.rb` cover the inference: loopback http URIs (IPv4, IPv6, `localhost`),
custom schemes, https URIs, mixed lists, the `localhost.example.com` lookalike, nil/empty input, and unparseable URIs.
New tests in `test/mcp/client/oauth/flow_test.rb` assert on the actual DCR request body via WebMock `assert_requested`:
loopback redirect URI registers `"application_type": "native"`, an HTTPS redirect URI registers `"web"`,
and an explicit `application_type` (symbol- or string-keyed) is never overridden.
## Breaking Changes
None. The DCR request body gains an `application_type` member only when the user has not specified one;
RFC 7591 requires authorization servers to accept and use known metadata fields, and OIDC-registration servers
already default this field to `"web"` when absent.
## Motivation and Context
SEP-2133 (modelcontextprotocol/modelcontextprotocol#2133, merged for
the 2026-07-28 spec release) establishes the extensions framework for MCP:
both `ClientCapabilities` and `ServerCapabilities` gain an optional `extensions`
member keyed by reverse-DNS extension identifiers
(e.g. `"io.modelcontextprotocol/tasks"`, `"com.example/feature"`), with arbitrary
extension-defined configuration objects as values and an empty object meaning
"supported with no settings". Official extensions such as MCP Apps (SEP-1865)
and the Tasks extension (SEP-2663) are layered on this field.
This mirrors the shape the TypeScript SDK merged (typescript-sdk#1630):
plain declaration and passthrough, no registrar API and no key-format validation
(the naming convention is documented instead).
- `MCP::Server::Capabilities` gains `support_extensions` (repeated calls merge),
accepts an `:extensions` key in its constructor hash, and includes `extensions`
in `to_h`. The class was previously dead code: it was never required and
`Server.new` only took plain hashes. It is now required by `lib/mcp/server.rb`,
and `Server.new(capabilities:)` accepts either a plain Hash (as before) or
a `Capabilities` instance.
- Server-declared extensions appear in the `initialize` result;
extensions the client declares during `initialize` were already stored verbatim and
are readable via `Server#client_capabilities[:extensions]` and
`ServerSession#client_capabilities[:extensions]` (now covered by tests).
- `MCP::Client#connect(capabilities:)` already passes capabilities through verbatim;
its documentation now covers the `extensions` member.
Resolves#378.
## How Has This Been Tested?
- New `test/mcp/server/capabilities_test.rb` covers the previously untested
`Capabilities` class: empty default, constructor round-trip, extensions via
constructor and `support_extensions`, merge semantics, nil tolerance,
and omission from `to_h` when never declared.
- New tests in `test/mcp/server_test.rb` assert that the `initialize` result
carries declared extensions (from both a plain hash and a `Capabilities` instance)
and that client-declared extensions are readable via `Server#client_capabilities`
and `ServerSession#client_capabilities`.
## Breaking Changes
None. `extensions` is additive and appears on the wire only when declared;
servers constructed with plain capability hashes behave exactly as before.
## Motivation and Context
The MCP specification defines an optional `annotations` field on both the
`Resource` and `ResourceTemplate` types, but the Ruby SDK is the only official
SDK that does not wire it up — TypeScript, Python, and PHP all implement it.
https://modelcontextprotocol.io/specification/2025-11-25/server/resources#annotations
The `MCP::Annotations` class already exists; this commit connects it. The field
accepts an `MCP::Annotations` instance rather than a raw hash, for consistency
with other typed fields and to get `lastModified` key normalization for free.
## How Has This Been Tested?
Added tests in `test/mcp/resource_test.rb` and
`test/mcp/resource_template_test.rb`:
- `#to_h` omits `annotations` when nil
- `#to_h` includes `annotations` when present (also asserting that
`last_modified` is serialized as `lastModified`)
The full unit suite and RuboCop pass locally.
## Breaking Changes
None. `annotations:` is a new optional keyword argument defaulting to `nil`,
and it is omitted from `#to_h` output when not set.
## Motivation and Context
SEP-2164 (modelcontextprotocol/modelcontextprotocol#2164, merged for the 2026-07-28 spec release)
standardizes the resource-not-found error on the JSON-RPC Invalid Params code (-32602),
dropping the legacy -32002 code, and both reference SDK implementations attach the requested URI
as structured error data (typescript-sdk#2267 throws `InvalidParams` with `data: { uri }`;
python-sdk#2344 adds a `ResourceNotFoundError` that maps to `code=-32602, data={"uri": ...}`).
The Ruby server already used -32602 (via `error_type: :invalid_params`) for its built-in not-found path
(`completion/complete` with an unknown `ref/resource` URI), but the response carried no structured data
and the generic "Invalid params" message, and there was no public error class for `resources_read_handler`
blocks to raise. The Ruby client never special-cased -32002, so nothing needed removal there.
- New public `MCP::Server::ResourceNotFoundError` (modeled on the `URLElicitationRequiredError` precedent):
code -32602, message `"Resource not found: <uri>"`, and `data: { uri: <uri> }`.
Custom `resources_read_handler` blocks raise it for unknown URIs; the README documents the pattern.
- The `completion/complete` `ref/resource` not-found path now raises this class,
so its error response gains `data: { uri: }` and a descriptive message instead of
the generic "Invalid params" text.
- The default `resources/read` behavior (returning empty contents for unknown URIs
when no handler is registered) is intentionally unchanged; raising there would
alter existing wire behavior.
Resolves#379.
## How Has This Been Tested?
New tests in `test/mcp/server_test.rb`:
- `resources/read` with a handler raising `ResourceNotFoundError` responds
with code -32602, message `"Resource not found: file:///missing.txt"`,
and `data: { uri: "file:///missing.txt" }`
- `completion/complete` with an unknown `ref/resource` URI carries the same code,
message, and structured data
New test in `test/mcp/client_test.rb` asserts `Client#read_resource` surfaces
the -32602 code and the `data` hash unmodified through `Client::ServerError`
(regression: no special-casing swallows it).
The pre-existing completion error-code tests pass unchanged.
`bundle exec rake` (tests, RuboCop, and conformance baseline) passes.
## Breaking Changes
None at the JSON-RPC code level (-32602 before and after).
The `completion/complete` resource-not-found error response changes shape within
the error object: `message` becomes `"Resource not found: <uri>"` instead of
`"Invalid params"`, and `data` becomes `{ uri: <uri> }` instead of the message string.
Both members are advisory per JSON-RPC 2.0.
## Motivation and Context
Resolves#398.
`JsonRpcHandler` returned `"id": null` for JSON-RPC envelope errors
(wrong or missing `jsonrpc` version, non-string `method`) even when
the incoming payload carried a concrete, valid request id.
From the client's perspective the original request stayed pending forever,
since no response with the matching id ever arrived:
```
{"jsonrpc":"1.0","id":3,"method":"ping","params":{}}
=> {"jsonrpc":"2.0","id":null,"error":{"code":-32600,...}}
```
Per JSON-RPC 2.0 (Response object, `id`), the response id MUST be
the same as the request's id; null is reserved for requests whose id
could not be detected (e.g. Parse error). The envelope validation in
`process_request` runs after JSON parsing with the request hash in
hand, so the id is detectable - it was simply discarded by passing
the `:unknown_id` sentinel unconditionally.
The fix passes the request's id to `error_response` whenever
the request carries one. The existing guards keep every other case intact:
`error_response` already nils out ids that fail validation
(so a type-invalid or pattern-violating id still yields `"id": null`,
preserving the XSS-prevention policy on echoed ids), and the `:unknown_id`
sentinel is kept for requests without an id so an Invalid Request error
still produces a null-id response, matching the spec's own example.
Parse errors and non-object requests are unchanged (null is correct there),
and batch entries pick up the fix automatically since each entry goes through
`process_request`.
For reference, the TypeScript and Python SDKs currently respond with
`"id": null` in these cases as well, because both validate the whole
message against a schema (zod / pydantic) before extracting the id.
This change is driven by the JSON-RPC 2.0 requirement rather than
parity; the Ruby transport layer already echoes the request id where
recoverable (`invalid_request_response(request_id:)` in
`StreamableHTTPTransport`), and this closes the remaining gap in
`JsonRpcHandler`.
## How Has This Been Tested?
- Reproduced the three payloads from #398 before and after the fix;
they now return `"id":3`, `"id":4`, and `"id":8` respectively
- New and updated unit tests covering: id preserved for wrong version,
missing `jsonrpc`, numeric `method`, and `rpc.`-prefixed `method`;
id preserved for an invalid entry inside a batch; null id kept for
requests without an id, with an explicit null id, and with an id
that fails validation
## Breaking Changes
None in the protocol sense - this aligns the error responses with
JSON-RPC 2.0. Clients that matched `"id": null` on these envelope
errors will now see the request's own id, which is what allows them
to correlate the error with the pending request.
## Motivation and Context
The MCP authorization specification and SEP-1046 allow confidential clients to
obtain tokens through the OAuth 2.1 `client_credentials` grant: a machine-to-machine flow
with no user, no browser redirect, and no authorization code. The Ruby SDK
previously supported only the interactive authorization-code flow, so it could not
authenticate against a server that requires `client_credentials`. This makes
the `auth/client-credentials-basic` conformance scenario pass and is removed from
the expected failures list.
Following the TypeScript SDK (`ClientCredentialsProvider`) and the Python SDK
(`ClientCredentialsOAuthProvider`), the grant gets its own provider class rather than
overloading the authorization-code provider. The change adds:
- `MCP::Client::OAuth::ClientCredentialsProvider`, a dedicated provider
for the grant. `client_id` and `client_secret` are mandatory
(the grant is for confidential clients), `token_endpoint_auth_method` is
`client_secret_basic` (default) or `client_secret_post` -- `none` is
rejected because an unauthenticated `client_credentials` request is
meaningless. It has no redirect arguments, so a credentials-only
client never supplies the redirect URI / handlers that grant has no use for.
- `MCP::Client::OAuth::StorageBackedProvider`, an internal module that
shares the token / client-information persistence between the two provider classes
so `Flow` can treat any provider uniformly.
- `Provider#authorization_flow` (`:authorization_code`) and
`ClientCredentialsProvider#authorization_flow` (`:client_credentials`).
`Flow#run!` dispatches on this rather than inspecting
`client_metadata[:grant_types]`, which is protocol metadata for
the authorization server, not an SDK control signal.
- `run_client_credentials!` shares the same PRM / AS metadata discovery
and Communication Security checks as the interactive flow, then
exchanges `grant_type=client_credentials` at the token endpoint via
the existing `post_to_token_endpoint` (which already applies
`client_secret_basic`). There is no PKCE, redirect, or `offline_access`
augmentation, because the grant does not issue a refresh token
(OAuth 2.1 Section 4.3.3).
- `conformance/client.rb` builds a `ClientCredentialsProvider` for
the `auth/client-credentials-*` scenarios, reusing the harness-injected
`client_id` / `client_secret`.
## How Has This Been Tested?
New `ClientCredentialsProvider` tests cover: credentials are stored as
client information; `authorization_flow` is `:client_credentials`;
`client_secret_post` is accepted; missing `client_id` / `client_secret`
and `token_endpoint_auth_method: "none"` are rejected; and the token helpers
delegate to storage.
New `Flow` tests cover: a `client_credentials` provider exchanges
`grant_type=client_credentials` with HTTP Basic auth, saves the token,
and never contacts the authorization or registration endpoint;
the requested scope is taken from PRM `scopes_supported`; and a standard
`Provider` runs the authorization-code grant regardless of what its
`client_metadata[:grant_types]` lists. A `Provider` test asserts
`authorization_flow` is `:authorization_code`.
Conformance: `auth/client-credentials-basic` now passes 7/7 with no failures.
## Breaking Changes
None. `ClientCredentialsProvider` is a new class; the existing `Provider` keeps
its required `redirect_uri` / `redirect_handler` / `callback_handler` arguments
and its behaviour is unchanged. Existing interactive clients are unaffected.
## Motivation and Context
SEP-414 (modelcontextprotocol/modelcontextprotocol#414, merged for
the 2026-07-28 spec release) documents OpenTelemetry trace context propagation
conventions for MCP: the un-prefixed `_meta` keys `traceparent`,
`tracestate`, and `baggage` are reserved (an explicit exception to
the reverse-DNS prefix rule) so trace context can flow between MCP clients and
servers per the W3C Trace Context and Baggage specifications.
This follows the TypeScript SDK's approach (typescript-sdk#2270):
guarantee `_meta` passthrough, export constants for the reserved key names,
and lock the behavior in with regression tests and documentation, without adding
an OpenTelemetry dependency (the Python SDK's python-sdk#2381 makes
`opentelemetry-api` a hard dependency instead, which conflicts with
this SDK's keep-dependencies-minimal policy):
- New `MCP::TraceContext` module exposing `TRACEPARENT_META_KEY`,
`TRACESTATE_META_KEY`, `BAGGAGE_META_KEY`, and `META_KEYS`.
- The server side already passes incoming request `_meta` to tool and prompt
handlers untouched via `server_context[:_meta]`; new regression tests pin
that guarantee for the three reserved keys.
- Every `MCP::Client` request method (`call_tool`, `read_resource`,
`get_prompt`, `complete`, `ping`, and the `list_*` methods) gains
a `meta:` keyword so Ruby clients can inject trace context (or any other
`_meta` entries) into outgoing requests; per SEP-414, trace context
should flow on every request, not only tool calls. The caller's hash is
never mutated. On `call_tool`, `progress_token` takes precedence over
a `progressToken` entry in `meta`, and an empty merge result omits `_meta`
entirely, preserving the existing wire format.
- README documents the convention and how to bridge the values to a tracing
system such as the `opentelemetry-ruby` gems.
Scope is intentionally client-to-server: server-initiated requests
(`sampling/createMessage`, `roots/list`, `elicitation/create`) do not accept
`meta:` yet; propagating trace context on those is a separate follow-up.
Resolves#374.
## How Has This Been Tested?
- New `test/mcp/trace_context_test.rb` pins the exact reserved key names and
the frozen `META_KEYS` list.
- New tests in `test/mcp/server_test.rb` assert that `tools/call` and
`prompts/get` deliver `traceparent`, `tracestate`, and `baggage` (alongside
`progressToken`) to handlers through `server_context[:_meta]` unchanged.
- New tests in `test/mcp/client_test.rb` cover the `meta:` keyword: the
trace keys are sent in `_meta` on `call_tool` and `read_resource`,
a table-driven test exercises the remaining request methods (`tools/list`,
`resources/list`, `resources/templates/list`, `prompts/list`,
`prompts/get`, `completion/complete`, `ping`), `progress_token` overrides
a `progressToken` entry in `meta` without duplicating the key,
the caller's `meta` hash is not mutated, and requests without `meta:`
serialize exactly as before (wire-format regressions for both the empty `meta`
hash and the no-params list request).
## Breaking Changes
None. `MCP::TraceContext` and the `meta:` keyword are purely additive, and
requests without `meta:` serialize exactly as before.
## Motivation and Context
The MCP authorization specification (2025-11-25 scope-selection-strategy)
and RFC 6750 Section 3.1 describe OAuth 2.0 step-up authentication:
the client already holds a valid access token, but the server returns a 403
with `WWW-Authenticate: Bearer error="insufficient_scope", scope="..."`
to demand a higher-privileged scope for a specific operation.
The client is expected to run a fresh authorization request with
the escalated scope and retry.
Until now the Ruby SDK only ran the OAuth flow on 401 responses.
A 403 surfaced unchanged as a `RequestHandlerError` and the operation
that needed the escalated scope failed permanently, even with a valid token
in storage. This lined up with the `auth/scope-step-up` conformance
scenario being listed in `conformance/expected_failures.yml`.
The change adds:
- `MCP::Client::HTTP#send_request` recognises a 403 carrying
an `insufficient_scope` Bearer challenge as a step-up signal,
re-runs a full authorization request with the scope from the challenge,
and retries the original request. Retries are capped at
one per `send_request` call so a server that repeatedly demands more
scope cannot loop the transport.
- `run_step_up_flow!` deliberately bypasses the refresh-token path that
`run_oauth_flow!` uses on 401. Refreshing would re-issue the same
scope set the existing token already has and the server already
rejected. Only a fresh `authorization_code` grant with the escalated
scope can succeed.
- A plain 403 with no `insufficient_scope` challenge continues to
surface as `RequestHandlerError` with `error_type: :forbidden`.
- `conformance/client.rb` invokes a tool for the `auth/scope-step-up`
scenario; the scenario's authorization middleware only requires
the escalated scope on `tools/call`, so the previous `tools/list`-only
client could never trigger the second authorization.
- `auth/scope-step-up` is removed from `conformance/expected_failures.yml`.
Resolves#383.
## How Has This Been Tested?
New `HTTPOAuthTest` cases cover: the 403 insufficient_scope path
re-authorizes with the escalated scope from the challenge and retries
the original request with the new bearer token; a plain 403 without
the `insufficient_scope` challenge is surfaced as
`error_type: :forbidden` with no OAuth side effects; repeated
`insufficient_scope` responses retry at most once and then surface the 403;
a provider with a saved `refresh_token` still goes through
the full authorization request rather than exchanging the refresh token,
because the existing scope set is precisely what was rejected.
Conformance: `auth/scope-step-up` now passes 22/22 with no warnings.
`bundle exec rake test`, `bundle exec rake rubocop`, and
`bundle exec rake conformance` are all green.
## Breaking Changes
None. Behaviour on 401 is unchanged. A 403 without the `insufficient_scope`
Bearer challenge still raises the same `RequestHandlerError` as before.
The new retry only fires when both the WWW-Authenticate header signals step-up
and the transport was constructed with an OAuth provider.
## Motivation and Context
SEP-2351 (modelcontextprotocol/modelcontextprotocol#2351, merged for the 2026-07-28 spec release)
makes explicit that MCP uses the default `oauth-authorization-server` well-known URI suffix from
RFC 8414 Section 3.1 and defines no application-specific suffix.
`MCP::Client::OAuth::Discovery.authorization_server_metadata_urls` already conforms:
it probes the RFC 8414 default suffix first (path-inserted form for path issuers) and
otherwise uses only the OpenID Connect Discovery `openid-configuration` suffix.
Neither the Python SDK nor the TypeScript SDK needed a behavior change for this SEP either;
their tracking issues (python-sdk#2799, typescript-sdk#2256) remain documentation-level.
This change documents the SEP-2351 guarantee in the discovery helper and locks the behavior
in with regression tests so a future refactor cannot silently introduce a non-default suffix.
Resolves#384.
## How Has This Been Tested?
New regression tests in `test/mcp/client/oauth/discovery_test.rb`:
- the first probed candidate for a root issuer is exactly `/.well-known/oauth-authorization-server`
- every generated candidate uses only the `oauth-authorization-server` or `openid-configuration` suffix
- the RFC 8414 path-inserted `oauth-authorization-server` candidate comes first for issuers with a path component
- an issuer URL with a trailing slash is treated as a root issuer
## Breaking Changes
None. Documentation and regression tests only; no behavior change.
## Motivation and Context
The MCP specification defines an optional `size` field on the `Resource`
type, added in spec revision 2025-06-18 and retained in 2025-11-25:
https://modelcontextprotocol.io/specification/2025-11-25/server/resources
> The size of the raw resource content, in bytes (i.e., before base64
> encoding or any tokenization), if known. This can be used by Hosts to
> display file sizes and estimate context window usage.
`MCP::Resource` was missing this field, so servers had no way to declare a
resource's byte size. Without it, hosts cannot show file sizes or estimate
context window usage before reading the resource contents.
This aligns the Ruby SDK with the spec, matching the TypeScript SDK
(modelcontextprotocol/typescript-sdk#1574).
## How Has This Been Tested?
Added tests in `test/mcp/resource_test.rb`:
- `#to_h` omits `size` when nil
- `#to_h` includes `size` when present
- `#to_h` includes `size` when zero (distinguishes an unset size from a
0-byte resource)
The full unit suite and RuboCop pass locally.
## Breaking Changes
None. `size:` is a new optional keyword argument defaulting to `nil`, and it
is omitted from `#to_h` output when not set, so existing callers are unaffected.
## Motivation and Context
MCP 2025-11-25 (basic/transports#protocol-version-header) specifies:
> For backwards compatibility, if the server does not receive an
> `MCP-Protocol-Version` header, and has no other way to identify the
> version - for example, by relying on the protocol version negotiated
> during initialization - the server SHOULD assume protocol version `2025-03-26`.
PR #347 satisfied only the MUST requirement (reject invalid/unsupported
values with 400). The SHOULD requirement to default a missing header to
`2025-03-26` was deferred to this follow-up.
This change brings the Ruby SDK in line with the Python SDK
(`src/mcp/server/streamable_http.py`), which falls back to
`DEFAULT_NEGOTIATED_VERSION` and then revalidates against the supported list.
## Behavior
A new constant `MCP::Configuration::DEFAULT_NEGOTIATED_PROTOCOL_VERSION`
holds `"2025-03-26"`. `validate_protocol_version_header` now substitutes
this value when the `MCP-Protocol-Version` header is absent, then runs
the same supported-version check. Because `"2025-03-26"` is currently in
`SUPPORTED_STABLE_PROTOCOL_VERSIONS`, missing headers continue to pass
through as before. Once `"2025-03-26"` is dropped from the supported
list in a future change, missing headers will start returning 400 with
a message naming the defaulted value.
## How Has This Been Tested?
Existing test `POST request without MCP-Protocol-Version header
succeeds` continues to pass (observable behavior unchanged today).
Added a focused regression test that stubs the supported-version list
to exclude `"2025-03-26"` and verifies that a header-less request is
rejected with the defaulted value reported in the error message;
this exercises the fallback branch directly.
## Breaking Changes
None today. The fallback is future-proofing: when `"2025-03-26"` is
eventually dropped, header-less requests will start returning 400.
That is the intended spec-driven behavior.
## Motivation and Context
PR #347 introduced a single JSON-RPC error envelope response for
unsupported `MCP-Protocol-Version` headers, while the rest of the
transport-level error responses (Accept, Content-Type, Invalid JSON,
session management, method not allowed, internal server error) still
returned plain JSON of the form `{ "error": "..." }`. The Python SDK
(`src/mcp/server/streamable_http.py`) and TypeScript SDK
(`packages/server/src/server/streamableHttp.ts`) consistently use
a JSON-RPC error envelope for all transport-level errors.
Unify the Ruby SDK with them.
## Behavior
All transport-level error responses now return a JSON-RPC error envelope:
```json
{
"jsonrpc": "2.0",
"id": null,
"error": {
"code": -32600,
"message": "..."
}
}
```
Affected helpers in `lib/mcp/server/transports/streamable_http_transport.rb`:
- `validate_content_type` (HTTP 415)
- `not_acceptable_response` (HTTP 406)
- `parse_request_body` error (HTTP 400, `PARSE_ERROR` `-32700`)
- `method_not_allowed_response` (HTTP 405)
- `missing_session_id_response` (HTTP 400)
- `session_not_found_response` (HTTP 404)
- `session_already_connected_response` (HTTP 409)
- Internal server error fallback in `handle_post` (HTTP 500, `INTERNAL_ERROR` `-32603`)
- `validate_protocol_version_header` (HTTP 400, dedup with shared helper)
A new private helper `json_rpc_error_response(status:, code:, message:)`
centralizes the envelope construction.
The "Invalid JSON" message wording is updated to "Parse error: Invalid JSON"
to match the JSON-RPC 2.0 `PARSE_ERROR` semantics.
## How Has This Been Tested?
Updated all affected tests in `test/mcp/server/transports/streamable_http_transport_test.rb` to
assert the new envelope shape (`body["error"]["message"]` instead of `body["error"]`).
## Breaking Changes
Clients that parsed the previous plain `{"error": "..."}` shape will need to read
`body["error"]["message"]` (or `body["error"]["code"]`).
The HTTP status codes are unchanged, only the response body structure changed.
## Motivation and Context
`MCP::Tool::Schema` previously used the pure-Ruby `json-schema` gem for
both construction-time metaschema validation and runtime argument /
result validation. For deep schemas this cost ~32-100ms per
construction (see issue #364).
`json_schemer` (https://rubygems.org/gems/json_schemer, v2.5.0) is
an actively maintained alternative that is much faster on this workload.
Switching reduces cold-start warming pressure in horizontally scaled
multi-tenant deployments (the scenario raised in #364) and brings
runtime data validation down to sub-millisecond per call once
the per-instance schemer is memoized.
The implementation preserves the legacy behavior of the `json-schema`
based code. Metaschema is pinned to draft-04 (`meta_schema:` option);
the `$schema` dialect URI is still emitted in `to_h` as 2020-12
but runtime validation continues to use draft-04, exactly as before.
Moving the runtime validator itself to 2020-12 is out of scope for
this PR and warrants its own discussion. `format` keywords are not enforced
(`format: false` option), matching what `json-schema`'s draft-04 path did.
Malformed schemas (e.g. an invalid `pattern` regex) continue to
surface as `ArgumentError, "Invalid JSON Schema: ..."`;
the `RegexpError` `json_schemer` raises during construction is wrapped.
`Symbol` values in argument data are coerced to strings inside
the internal `stringify` helper so they validate against `type: "string"`
the same way they did before.
The public `Schema#schema` accessor is dropped. It was a refactor
artifact from #198 (the consolidation of `InputSchema`'s
`properties` / `required` readers into a single hash) with no callers
in `lib/`; tests that needed the merged hash now read it through
`to_h`. The accessor's only remaining role would have been to expose
a mutation path that could desynchronize the memoized `@schemer`,
which this change removes.
Runtime dependency delta: drops `json-schema` (and `addressable`),
adds `json_schemer`, `hana`, `regexp_parser`, and `simpleidn`. Each added
gem is a single-purpose library tied to JSON Schema spec compliance.
Closes#364.
## How Has This Been Tested?
Side-by-side benchmark on representative schemas (simple, with `$ref` /
`additionalProperties`, nested, depth 20, depth 40):
construction-time metaschema validation is 4.7x to ~100x faster;
runtime data validation with the memoized schemer is sub-millisecond
across all sizes.
Four existing tests had their stub targets or message assertions updated
to track the new validator while preserving the original test intent.
The "unexpected errors bubble up" tests in `input_schema_test.rb`
and `output_schema_test.rb` now stub `JSONSchemer::Schema#validate`
instead of `JSON::Validator.fully_validate`. The cache tests in
`schema_test.rb` now stub `JSONSchemer::Schema#validate_schema`.
The two "detailed error message" tests in `tool_test.rb` switched from
asserting `json-schema`'s exact wording to format-agnostic substrings
(`"properties/count/minimum"`, `"number"`). The "required arguments are
converted to strings" test in `input_schema_test.rb` now reads the result
through `to_h[:required]` instead of the removed `schema` accessor.
Regression tests added for the legacy-behavior preservations above:
`format` keyword is not enforced, invalid `pattern` raises `ArgumentError`
(not `RegexpError`), and `Symbol` values validate against `type: "string"`.
## Breaking Changes
`Schema#schema` is no longer a public method. The accessor had no callers
outside the test suite, but anyone reading the internal representation
directly (rather than through `to_h`) will need to switch.
`Schema` / `InputSchema` / `OutputSchema` otherwise keep
their constructor signatures, `to_h` output, `ValidationError` /
`ArgumentError` raise points, and the `$schema` dialect emission.
The validator error message wording inside `ArgumentError` and
`ValidationError` now comes from `json_schemer` and still includes
the JSON pointer path and a description of the mismatch.
## Motivation and Context
SEP-2207 describes how an OAuth client obtains refresh tokens: it
declares the `refresh_token` grant type in its client metadata and
requests the `offline_access` scope, but only when the authorization
server advertises `offline_access` in its metadata `scopes_supported`.
Requesting `offline_access` when the server does not list it is forbidden.
The Ruby SDK already supports the refresh grant (`Flow#refresh!`) but never
requested `offline_access`, so it could not obtain a refresh token from a server
that gates it behind that scope. This aligns the SDK with the Python and TypeScript SDKs
and makes the `auth/offline-access-scope` conformance scenario pass
(previously it reported one warning, `sep-2207-client-metadata-grant-types`,
and was listed in the expected-failures baseline).
The change adds:
- `Flow#augment_scope_with_offline_access`, called from `run!` after
`resolve_scope`, appends `offline_access` to the requested scope when
both the client opted into refresh tokens (its registered
`grant_types` include `refresh_token`) and the authorization server
advertises `offline_access` in its metadata `scopes_supported`.
Already-present `offline_access` is not duplicated. Gating on the server
advertisement keeps the SDK from ever requesting the scope where it is not supported.
- `conformance/client.rb` declares `refresh_token` in `grant_types`, an honest reflection
of the SDK's refresh support, which clears the SEP-2207 grant-types warning.
- `auth/offline-access-scope` is removed from `conformance/expected_failures.yml`.
## How Has This Been Tested?
New `Flow` tests cover: `offline_access` is requested when the server advertises it
and the client declared the `refresh_token` grant; `offline_access` is NOT requested
when the client did not declare the grant; `offline_access` is NOT requested
when the server does not advertise it (even with the grant declared);
and `offline_access` is not duplicated when it is already part of the resolved scope.
Conformance: `auth/offline-access-scope` now passes 14/14 with no warnings,
and `auth/offline-access-not-supported` still passes 13/13 (no regression).
`bundle exec rake test`, `bundle exec rake rubocop`, and `bundle exec rake conformance`
are all green.
## Breaking Changes
None. `offline_access` is appended only when the client's own `grant_types` opt
into refresh tokens and the authorization server advertises the scope, so existing clients
that do neither see no change in the scope they request.
## Motivation and Context
`MCP::Tool::Schema#initialize` validated every instance against the draft-04 metaschema
via `JSON::Validator.fully_validate`, costing ~32ms for deep schemas (up to ~100ms).
When schemas are built dynamically and repeatedly, this work is wasted because
the result depends only on the schema content.
This caches successful validations by a content digest, so an identical schema is validated
once and subsequent constructions skip the traversal (~100ms to ~0.1ms on a cache hit).
The cache is bounded and thread-safe. It supersedes the `validate: false` escape hatch proposed
in #362, which would have added permanent public interface and allowed invalid schemas
to reach clients.
Python and TypeScript SDKs do not metaschema-validate schema definitions, so this cost is specific
to the Ruby SDK; caching reduces it without weakening the default or changing validation semantics.
## How Has This Been Tested?
Added regression tests in `test/mcp/tool/schema_test.rb`: identical schemas validate only once,
distinct schemas validate separately, a cache hit still yields a usable and correctly validated schema,
invalid schemas raise on every construction and are not cached, a schema at the normalization depth limit
is cached without a nesting error, and `ValidationCache` evicts the oldest entry beyond its max size.
The full suite (`rake test`) and `rake rubocop` pass.
## Breaking Changes
None. Validation safety is preserved: every distinct schema is still validated, and invalid schemas
continue to raise. The initializer signature and validation semantics are unchanged.
## Motivation and Context
The MCP 2025-11-25 authorization specification and `draft-ietf-oauth-client-id-metadata-document-00` define
Client ID Metadata Documents (CIMD): a client publishes its OAuth metadata at an HTTPS URL and uses that URL
as the OAuth `client_id` instead of going through Dynamic Client Registration. The Python and TypeScript SDKs
already implement this; the Ruby SDK now reaches parity.
The change adds:
- `MCP::Client::OAuth::Provider` accepts an optional `client_id_metadata_document_url:` keyword.
- A new `Discovery.client_id_metadata_document_url?` validator enforces structural requirements.
Spec-required: `https` scheme, a non-root path, and no fragment, userinfo, or `.`/`..` segments
(including the percent-encoded form `%2E`). Stricter than the draft as an SDK policy: query strings
are also rejected, because different encodings of the same query would yield distinct `client_id` strings for
the same logical document. The loopback `http` carve-out used for discovery URLs does not extend to CIMD URLs,
since the value is sent verbatim to the authorization server as the OAuth `client_id` and travels off-loopback.
Validation failures raise `Provider::InvalidClientIDMetadataDocumentURLError`.
- `Flow#ensure_client_registered` routes through CIMD only when the authorization server advertises
`client_id_metadata_document_supported` as JSON `boolean true`; truthy non-boolean values
(string `"true"`, `"false"`, etc.) fall back to DCR, matching the gating in the Python and TypeScript SDKs.
- The CIMD `client_id` is NOT persisted to storage. AS support is re-read on every flow so a server
that later drops CIMD support stops receiving the stale URL. Pre-registered `client_information`
continues to win over CIMD when both are available.
- `Flow#refresh!` reconstructs the CIMD `client_id` from live AS metadata when refreshing tokens obtained via CIMD.
When support has been withdrawn and no other identity is stored, it raises a clear `AuthorizationError` rather than
sending a `client_id` the authorization server no longer recognises.
- The Provider docstring and README OAuth section explain that DCR `client_metadata` and the JSON document served at
the CIMD URL are separate artifacts: DCR metadata MUST NOT include `client_id`, while the CIMD document MUST include
`client_id` set to the URL, `client_name`, and `redirect_uris` covering `redirect_uri`.
- `auth/basic-cimd` is removed from `conformance/expected_failures.yml`.
## How Has This Been Tested?
`Discovery` tests cover: https with path accepted; non-https rejected (http, ftp, file); root and empty path rejected;
fragment, query, and userinfo rejected; dot segments rejected including the percent-encoded form `%2E`; nil, empty,
and malformed inputs rejected.
`Provider` tests cover: the default `nil`; rejection of http URLs (loopback included); non-https schemes;
root and empty path; fragment; query; userinfo; and dot segments.
`Flow#run!` tests cover: skip DCR when the authorization server advertises CIMD and the provider has a URL;
fall back to DCR when the authorization server does not advertise support; fall back to DCR when the value is
the string `"false"` or `"true"`; pre-registered `client_information` wins over CIMD; the CIMD `client_id` is not
persisted to storage; a second flow against an authorization server that has dropped CIMD support recovers via DCR.
`Flow#refresh!` tests cover: refresh reconstructs the CIMD `client_id` without a stored `client_information`;
refresh raises when the authorization server no longer advertises CIMD support; stored `client_information`
takes precedence over the CIMD URL during refresh.
Conformance: `auth/basic-cimd` now passes 12/12 with no warnings. `bundle exec rake test`, `bundle exec rake rubocop`,
and `bundle exec rake conformance` are all green.
## Breaking Changes
None. The `client_id_metadata_document_url:` keyword is purely opt-in and defaults to `nil`.
When the keyword is omitted, the DCR flow is unchanged. Existing OAuth users see no behaviour change.
The CIMD path is only entered when both the user explicitly configures a URL and the authorization server
advertises support via `client_id_metadata_document_supported: true`.
## Motivation and Context
RFC 9110 defines media type comparison as case-insensitive,
but `parse_accept_header` compared types without normalizing case.
This caused `Application/JSON` or `TEXT/Event-Stream` to be rejected
with 406 Not Acceptable.
## How Has This Been Tested?
Added tests for mixed-case Accept headers:
- `Accept: Application/JSON, Text/Event-Stream` succeeds for POST
- `Accept: TEXT/EVENT-STREAM` succeeds for GET SSE
## Breaking Changes
None. This is a bug fix bringing behavior into conformance with RFC 9110.
## Motivation and Context
The MCP specification defines `ping` as a bidirectional utility: either party may issue it.
https://modelcontextprotocol.io/specification/2025-11-25/basic/utilities/ping
The previous PR added `MCP::Client#ping`. This PR adds the symmetric server-side send capability,
`ServerSession#ping`.
This aligns the Ruby SDK with the Python SDK (`ServerSession.send_ping`) and
the TypeScript SDK (`Server.ping()`), both of which expose a server-initiated ping.
In practice this enables a Ruby MCP server to health-check non-Ruby clients
(e.g., Claude Desktop, the Python or TypeScript SDK client) during long-running tool operations.
Scope is intentionally server-only: this PR does not add client-side inbound request dispatch,
which is a larger refactor outside the ping utility. A Ruby `MCP::Client` therefore still cannot receive
a server-initiated ping; that gap is tracked as a separate follow-up.
## How Has This Been Tested?
New file `test/mcp/server_session_ping_test.rb` covers:
- success (empty `result` returned)
- `related_request_id` propagated through the transport when a session ID is set
- `ValidationError` when the transport returns `nil`
- `ValidationError` when the transport returns a non-Hash `result`
- transport-level errors propagate unchanged
- ping succeeds without any client capability declaration (per spec, ping has no capability gate)
`test/mcp/server_context_test.rb` adds two tests for `ServerContext#ping` delegation
(happy path and `NoMethodError` when the session lacks `#ping`).
The existing server-side `ping` handler tests continue to pass unchanged.
## Breaking Changes
None. `MCP::ServerContext#ping` and `MCP::Server::ValidationError` are purely additive.
## Motivation and Context
The Ruby SDK accepted duplicate `initialize` requests after a session was already initialized.
On stdio, a second `initialize` silently overwrote the per-session `clientInfo` and `clientCapabilities`
(including with an older `protocolVersion`). On Streamable HTTP, every `initialize` minted a fresh
`Mcp-Session-Id` and `ServerSession`, abandoning the originally negotiated session.
MCP specification (`2025-06-18` / `2025-11-25` lifecycle) states that the initialization phase
MUST be the first interaction between client and server;
re-initialization on an established session is not part of the defined lifecycle.
TypeScript SDK rejects duplicate `initialize` on a live session with HTTP 400 + JSON-RPC `-32600`
("Invalid Request: Server already initialized"), and Python SDK does not mint a new session
on duplicate `initialize`. The Ruby SDK was the outlier; this change aligns it with the TypeScript SDK.
- `ServerSession` tracks an `@initialized` flag, exposed via `initialized?` and
set by `mark_initialized!` after a successful `initialize` response.
- `Server#init` raises `RequestHandlerError(error_type: :invalid_request)` when
the session is already initialized, which the existing error mapping converts
to JSON-RPC `-32600 Invalid Request`.
- `StreamableHTTPTransport#handle_post` short-circuits at the transport layer:
duplicate `initialize` against a live session returns HTTP 400 + JSON-RPC
`-32600`; a stale or expired `Mcp-Session-Id` returns 404 (evicting the expired entry
instead of misreporting it as a duplicate).
- `handle_initialization` evicts the registered session and omits the `Mcp-Session-Id`
header when the first `initialize` fails before `mark_initialized!` is reached,
so retries do not collide with an orphaned ID.
- Non-Hash JSON-RPC POST bodies (e.g. batched arrays, which are not supported in `2025-11-25`)
are explicitly rejected with HTTP 400 + JSON-RPC `-32600` rather than falling through to
an unparseable Rack response.
## How Has This Been Tested?
- Server tests: a second `initialize` on the same `ServerSession` returns
`code: -32600` and the original `clientInfo` is preserved.
- Streamable HTTP tests: duplicate `initialize` with a live `Mcp-Session-Id`
returns HTTP 400 + `-32600` and the original session remains usable for
subsequent `ping`; stale `Mcp-Session-Id` returns 404; an idle-expired
session is evicted on duplicate `initialize` and returns 404; a failed
`initialize` (invalid `jsonrpc` envelope) does not leak `Mcp-Session-Id` and
leaves `@sessions` empty; an array body is rejected with HTTP 400 + `-32600`.
- Stdio tests: a second `initialize` on the same stdio session returns
`code: -32600` and the original `clientInfo` is preserved.
## Breaking Changes
Clients that previously sent `initialize` more than once on the same session
now receive a JSON-RPC error with `code: -32600` for the second and later requests
instead of silently overwriting session state (stdio) or being re-issued
a new `Mcp-Session-Id` (Streamable HTTP). Clients that follow the MCP specification
(single `initialize` per session) are unaffected.
Additionally, non-Hash JSON-RPC POST bodies on Streamable HTTP now return
HTTP 400 + JSON-RPC `-32600` rather than falling through to a broken Rack response.
The previous behavior produced an unparseable response, so this is unlikely to
affect any working client.
Closes#349.
## Motivation and Context
MCP 2025-11-25 does not support JSON-RPC batch (batch support was removed in 2025-06-18),
so request bodies are expected to be a single JSON-RPC message object. The previous code path:
```ruby
body = parse_request_body(body_string)
return body unless body.is_a?(Hash)
```
returned the parsed JSON value as if it were a Rack response when
the body was a JSON array (former batch shape), a string, a number,
or any other non-Hash JSON value. This produced a malformed Rack response
instead of a proper HTTP 400.
This was a pre-existing bug exposed during follow-up review of #347
(`MCP-Protocol-Version` header validation), which surfaced it but did not fix
the broken response shape for non-Hash bodies sent with a valid header.
### Behavior
- `parse_request_body` now raises a private `InvalidJsonError` on parse
failure instead of returning a Rack response tuple. The overloaded
return type and the `parse_error_tuple?` discriminator are gone.
- `handle_post` rescues `InvalidJsonError` and returns the same plain
JSON 400 response as before (`{"error":"Invalid JSON"}`), so parse
error handling is observably unchanged.
- Non-Hash parsed bodies (arrays, strings, numbers, booleans, null) now
return HTTP 400 with a plain JSON body explaining that the body must
be a single JSON-RPC message object, instead of producing a malformed
Rack response.
The error response shape stays in the existing plain JSON style for
consistency with `validate_content_type`, `not_acceptable_response`,
and the other transport-level error helpers. Unifying all of these to
a JSON-RPC error envelope (matching the Python and TypeScript SDKs) is
deferred to a separate follow-up.
### SDK Comparison
- Python SDK (`src/mcp/server/streamable_http.py`): Already rejects
non-Hash bodies (Array, primitive) with HTTP 400. Uses a JSON-RPC
error envelope with `INVALID_PARAMS`.
- TypeScript SDK (`packages/server/src/server/streamableHttp.ts`):
As of `main`, still processes JSON arrays as JSON-RPC batches and
has not yet caught up with the 2025-06-18 batch removal. Primitives
fail schema validation and return 400 with a JSON-RPC error envelope.
This change brings the Ruby SDK in line with the current MCP spec
(no batch). The Ruby SDK is now closer to the spec than the TypeScript
SDK's `main` branch on this specific point.
## How Has This Been Tested?
Existing regression test `test "handles POST request with invalid
JSON"` continues to pass unchanged (plain JSON response preserved).
Added new regression tests:
- POST with a JSON array body returns 400 with a clear error message
- POST with a non-object JSON body (e.g. `"foo"`) returns 400
`bundle exec rake test` and `bundle exec rake rubocop` both pass.
## Breaking Changes
None for compliant clients sending single JSON-RPC message objects.
Clients that were sending JSON arrays (batch requests, no longer
supported as of MCP 2025-11-25) or other non-object bodies will now
receive a proper HTTP 400 with a JSON error body instead of
the previous malformed Rack response; no client could have relied on
the broken pre-existing behavior.
## Motivation and Context
The MCP Authorization spec (2025-11-25) requires clients to support
Protected Resource Metadata discovery (RFC 9728), Authorization
Server Metadata discovery (RFC 8414), Dynamic Client Registration,
and OAuth 2.1 Authorization Code grant with PKCE (S256). The Ruby SDK
previously had no client-side OAuth support: the HTTP transport raised
`RequestHandlerError` on a 401 with no recovery, and 21 `auth/*` scenarios
were listed as known failures in `conformance/expected_failures.yml`.
This aligns the Ruby SDK with the Python and TypeScript SDKs,
both of which expose a pluggable OAuth client provider that drives
the full discovery + DCR + authorization + token exchange flow.
`MCP::Client::OAuth::Provider` mirrors that surface: callers supply
`client_metadata`, a `redirect_uri`, and pluggable `redirect_handler`
/ `callback_handler` hooks plus a token/client information storage.
`MCP::Client::OAuth::InMemoryStorage` is provided as a default.
`MCP::Client::HTTP` accepts a new optional `oauth:` keyword. When present,
the transport attaches `Authorization: Bearer` to every request,
and on a 401 parses `WWW-Authenticate` for the `resource_metadata` URL
and `scope` challenge, drives the discovery + DCR + authorization code flow
through the provider, and retries the failed request once with the acquired token.
Spec compliance details:
- The `WWW-Authenticate` parser handles multiple challenges
(e.g. `Basic ..., Bearer ...` or `Bearer ..., DPoP ...`), extracting only
the parameters that belong to the Bearer challenge.
- The PRM `resource` value is required to cover the MCP server URL
(same scheme/host/port, with the PRM path as a prefix of the server path)
before the flow continues, preventing redirection of issued tokens to a different audience.
- Both authorization and token requests always include a `resource`
parameter (RFC 8707), defaulting to a canonicalized form of
the MCP server URL when PRM does not advertise one.
- `client_secret_basic`, `client_secret_post`, and `none` token endpoint
authentication methods are supported. When pre-registered client information
specifies no `token_endpoint_auth_method`, the transport defaults to
`client_secret_basic` per RFC 6749 §2.3.1 an dthe TS/Python SDK convention.
Pre-registered client credentials supplied via `Storage#save_client_information`
with either string or symbol keys are honored, skipping DCR.
- Scope resolution follows the spec order: the `WWW-Authenticate` challenge scope wins first,
then PRM `scopes_supported`, and `Provider#scope` is the last-resort fallback only
if neither is supplied (the provider-supplied scope must not pre-empt server-advertised scope).
- Token endpoint error responses (RFC 6749 §5.2) are parsed: a 4x with
`error: "invalid_grant"` raises `Flow::InvalidGrantError`,
so `MCP::Client::HTTP` can discard the stored refresh token only when
the AS truly says it is dead. Generic `AuthorizationError`
(5xx, network failures, other error codes) leaves the refresh token
intact, so a transient AS outage does not force interactive reauth
on the next attempt.
- The OAuth `state` parameter is compared via
`OpenSSL.fixed_length_secure_compare` (with a `bytesize` guard) to
prevent timing-based discovery of the expected value.
- The 401 retry guard is a request-scoped local variable, so an MCP server
that keeps returning 401 is surfaced as an error after one
retry rather than triggering an infinite re-authorization loop.
## How Has This Been Tested?
Unit tests cover PKCE generation, multi-challenge `WWW-Authenticate` parsing,
PRM and Authorization Server metadata URL builders, the full Flow orchestrator
(success path, state mismatch, missing PKCE support, skipping DCR for both string
and symbol-keyed preregistered client information, `client_secret_basic`
token endpoint authentication, PRM `resource` mismatch rejection, fallback to
the server URL when PRM omits `resource`, scope resolution preferring PRM
`scopes_supported` over `Provider#scope`, default `client_secret_basic` for
confidential clients without an explicit `token_endpoint_auth_method`,
and the new `InvalidGrantError` vs generic `AuthorizationError` split for
token endpoint rejections), and the HTTP transport behavior
(401 recovery + retry, no-provider fallthrough, no infinite loop on repeated 401,
no infinite loop on flow failure, refresh-token retention on transient 5xx from
the token endpoint).
Conformance: `bundle exec rake conformance` newly passes 16 `auth/*`
scenarios beyond the existing baseline, including
`auth/metadata-default`, `metadata-var{1,2,3}`,
`scope-from-www-authenticate`, `scope-from-scopes-supported`,
`scope-omitted-when-undefined`, `scope-retry-limit`,
`token-endpoint-auth-{basic,post,none}`, `pre-registration`,
`resource-mismatch`, and `offline-access-not-supported`. Remaining
`auth/*` scenarios stay in `expected_failures.yml`.
`bundle exec rake test rubocop` is clean.
## Breaking Changes
None. `MCP::Client::HTTP#initialize` accepts a new optional `oauth:`
keyword that defaults to `nil`, preserving existing behavior. When unset,
the transport raises `MCP::Client::RequestHandlerError` on a 401 exactly as before.
## Motivation and Context
When an `initialize` POST carries an `MCP-Protocol-Version` HTTP header that disagrees with
`params.protocolVersion` in the JSON-RPC body, the Streamable HTTP server accepts the request
and negotiates using the body value. The behavior was already encoded in `handle_post`
(the header check is skipped on `initialize`) but it was not stated in the code and there was
no regression test for the specific mismatch case.
MCP 2025-06-18 / 2025-11-25 only requires `MCP-Protocol-Version` on requests subsequent to
`initialize`, and the spec does not require the header and body to agree on the initial `initialize`.
All official MCP SDKs (TypeScript, Python, Rust, Java, Go, PHP) accept the mismatch and
treat the JSON-RPC body as authoritative.
## How Has This Been Tested?
Streamable HTTP tests: two new regression tests confirm that on an `initialize` POST
with a supported but mismatched `MCP-Protocol-Version` header, the server returns
HTTP 200 and the response's `result.protocolVersion` matches the JSON-RPC body value,
in both mismatch directions (header older / body newer, and header newer / body older).
## Breaking Changes
None. The behavior is unchanged: `initialize` requests with a mismatched `MCP-Protocol-Version` header
are still accepted, and the JSON-RPC body `params.protocolVersion` continues to drive negotiation.
This commit only adds an explanatory comment and regression tests.
Closes#351.
## Motivation and Context
MCP 2025-11-25 (basic/transports#protocol-version-header) requires servers
to respond with `400 Bad Request` when receiving a request with an invalid
or unsupported `MCP-Protocol-Version` header:
> If the server receives a request with an invalid or unsupported
> `MCP-Protocol-Version`, it MUST respond with `400 Bad Request`.
The Ruby SDK was not reading the header at all, accepting any value
(including malformed strings like `not-a-version` and unsupported versions
like `1900-01-01`) and dispatching requests normally with HTTP 200.
## Behavior
`StreamableHTTPTransport` now validates the `MCP-Protocol-Version` header
on POST (non-initialize), GET, and DELETE requests. Missing headers are
accepted as before; the spec SHOULD requirement to default to `2025-03-26`
is intentionally left for a follow-up. The `initialize` POST is exempt
because the client does not know the negotiated version until the response
arrives, matching the Python (`src/mcp/server/streamable_http.py`) and
TypeScript (`packages/server/src/server/streamableHttp.ts`) SDKs.
The error response uses a JSON-RPC envelope with `code: -32600`
(`INVALID_REQUEST`) to match the Python SDK shape:
```json
{
"jsonrpc": "2.0",
"id": null,
"error": {
"code": -32600,
"message": "Bad Request: Unsupported protocol version: <value>. Supported versions: ..."
}
}
```
Validation order is session then protocol version, matching the Python and
TypeScript SDKs.
`handle_post` was reorganized so that non-Hash request bodies (e.g., JSON
arrays, which MCP 2025-11-25 no longer supports as batches) also pass
through the header check. The pre-existing broken response for Array
bodies sent with a valid header is unchanged and is tracked as a separate
follow-up.
## How Has This Been Tested?
Added regression tests covering:
- POST `initialize` ignores the header (bypass)
- POST non-initialize with unsupported / malformed / valid / missing values
- POST array body with unsupported value returns 400
- GET with unsupported / missing values
- DELETE with unsupported value in both stateful and stateless modes
- DELETE validates session before protocol version
`bundle exec rake test` and `bundle exec rake rubocop` both pass.
## Breaking Changes
Strictly additive for compliant clients. Third-party clients sending stale
or malformed `MCP-Protocol-Version` values will now receive `400` instead
of `200`, which is the intended spec behavior.
Fixes#346.
