## Motivation and Context
Resolves#398.
`JsonRpcHandler` returned `"id": null` for JSON-RPC envelope errors
(wrong or missing `jsonrpc` version, non-string `method`) even when
the incoming payload carried a concrete, valid request id.
From the client's perspective the original request stayed pending forever,
since no response with the matching id ever arrived:
```
{"jsonrpc":"1.0","id":3,"method":"ping","params":{}}
=> {"jsonrpc":"2.0","id":null,"error":{"code":-32600,...}}
```
Per JSON-RPC 2.0 (Response object, `id`), the response id MUST be
the same as the request's id; null is reserved for requests whose id
could not be detected (e.g. Parse error). The envelope validation in
`process_request` runs after JSON parsing with the request hash in
hand, so the id is detectable - it was simply discarded by passing
the `:unknown_id` sentinel unconditionally.
The fix passes the request's id to `error_response` whenever
the request carries one. The existing guards keep every other case intact:
`error_response` already nils out ids that fail validation
(so a type-invalid or pattern-violating id still yields `"id": null`,
preserving the XSS-prevention policy on echoed ids), and the `:unknown_id`
sentinel is kept for requests without an id so an Invalid Request error
still produces a null-id response, matching the spec's own example.
Parse errors and non-object requests are unchanged (null is correct there),
and batch entries pick up the fix automatically since each entry goes through
`process_request`.
For reference, the TypeScript and Python SDKs currently respond with
`"id": null` in these cases as well, because both validate the whole
message against a schema (zod / pydantic) before extracting the id.
This change is driven by the JSON-RPC 2.0 requirement rather than
parity; the Ruby transport layer already echoes the request id where
recoverable (`invalid_request_response(request_id:)` in
`StreamableHTTPTransport`), and this closes the remaining gap in
`JsonRpcHandler`.
## How Has This Been Tested?
- Reproduced the three payloads from #398 before and after the fix;
they now return `"id":3`, `"id":4`, and `"id":8` respectively
- New and updated unit tests covering: id preserved for wrong version,
missing `jsonrpc`, numeric `method`, and `rpc.`-prefixed `method`;
id preserved for an invalid entry inside a batch; null id kept for
requests without an id, with an explicit null id, and with an id
that fails validation
## Breaking Changes
None in the protocol sense - this aligns the error responses with
JSON-RPC 2.0. Clients that matched `"id": null` on these envelope
errors will now see the request's own id, which is what allows them
to correlate the error with the pending request.
## Motivation and Context
The MCP authorization specification and SEP-1046 allow confidential clients to
obtain tokens through the OAuth 2.1 `client_credentials` grant: a machine-to-machine flow
with no user, no browser redirect, and no authorization code. The Ruby SDK
previously supported only the interactive authorization-code flow, so it could not
authenticate against a server that requires `client_credentials`. This makes
the `auth/client-credentials-basic` conformance scenario pass and is removed from
the expected failures list.
Following the TypeScript SDK (`ClientCredentialsProvider`) and the Python SDK
(`ClientCredentialsOAuthProvider`), the grant gets its own provider class rather than
overloading the authorization-code provider. The change adds:
- `MCP::Client::OAuth::ClientCredentialsProvider`, a dedicated provider
for the grant. `client_id` and `client_secret` are mandatory
(the grant is for confidential clients), `token_endpoint_auth_method` is
`client_secret_basic` (default) or `client_secret_post` -- `none` is
rejected because an unauthenticated `client_credentials` request is
meaningless. It has no redirect arguments, so a credentials-only
client never supplies the redirect URI / handlers that grant has no use for.
- `MCP::Client::OAuth::StorageBackedProvider`, an internal module that
shares the token / client-information persistence between the two provider classes
so `Flow` can treat any provider uniformly.
- `Provider#authorization_flow` (`:authorization_code`) and
`ClientCredentialsProvider#authorization_flow` (`:client_credentials`).
`Flow#run!` dispatches on this rather than inspecting
`client_metadata[:grant_types]`, which is protocol metadata for
the authorization server, not an SDK control signal.
- `run_client_credentials!` shares the same PRM / AS metadata discovery
and Communication Security checks as the interactive flow, then
exchanges `grant_type=client_credentials` at the token endpoint via
the existing `post_to_token_endpoint` (which already applies
`client_secret_basic`). There is no PKCE, redirect, or `offline_access`
augmentation, because the grant does not issue a refresh token
(OAuth 2.1 Section 4.3.3).
- `conformance/client.rb` builds a `ClientCredentialsProvider` for
the `auth/client-credentials-*` scenarios, reusing the harness-injected
`client_id` / `client_secret`.
## How Has This Been Tested?
New `ClientCredentialsProvider` tests cover: credentials are stored as
client information; `authorization_flow` is `:client_credentials`;
`client_secret_post` is accepted; missing `client_id` / `client_secret`
and `token_endpoint_auth_method: "none"` are rejected; and the token helpers
delegate to storage.
New `Flow` tests cover: a `client_credentials` provider exchanges
`grant_type=client_credentials` with HTTP Basic auth, saves the token,
and never contacts the authorization or registration endpoint;
the requested scope is taken from PRM `scopes_supported`; and a standard
`Provider` runs the authorization-code grant regardless of what its
`client_metadata[:grant_types]` lists. A `Provider` test asserts
`authorization_flow` is `:authorization_code`.
Conformance: `auth/client-credentials-basic` now passes 7/7 with no failures.
## Breaking Changes
None. `ClientCredentialsProvider` is a new class; the existing `Provider` keeps
its required `redirect_uri` / `redirect_handler` / `callback_handler` arguments
and its behaviour is unchanged. Existing interactive clients are unaffected.
## Motivation and Context
The MCP authorization specification (2025-11-25 scope-selection-strategy)
and RFC 6750 Section 3.1 describe OAuth 2.0 step-up authentication:
the client already holds a valid access token, but the server returns a 403
with `WWW-Authenticate: Bearer error="insufficient_scope", scope="..."`
to demand a higher-privileged scope for a specific operation.
The client is expected to run a fresh authorization request with
the escalated scope and retry.
Until now the Ruby SDK only ran the OAuth flow on 401 responses.
A 403 surfaced unchanged as a `RequestHandlerError` and the operation
that needed the escalated scope failed permanently, even with a valid token
in storage. This lined up with the `auth/scope-step-up` conformance
scenario being listed in `conformance/expected_failures.yml`.
The change adds:
- `MCP::Client::HTTP#send_request` recognises a 403 carrying
an `insufficient_scope` Bearer challenge as a step-up signal,
re-runs a full authorization request with the scope from the challenge,
and retries the original request. Retries are capped at
one per `send_request` call so a server that repeatedly demands more
scope cannot loop the transport.
- `run_step_up_flow!` deliberately bypasses the refresh-token path that
`run_oauth_flow!` uses on 401. Refreshing would re-issue the same
scope set the existing token already has and the server already
rejected. Only a fresh `authorization_code` grant with the escalated
scope can succeed.
- A plain 403 with no `insufficient_scope` challenge continues to
surface as `RequestHandlerError` with `error_type: :forbidden`.
- `conformance/client.rb` invokes a tool for the `auth/scope-step-up`
scenario; the scenario's authorization middleware only requires
the escalated scope on `tools/call`, so the previous `tools/list`-only
client could never trigger the second authorization.
- `auth/scope-step-up` is removed from `conformance/expected_failures.yml`.
Resolves#383.
## How Has This Been Tested?
New `HTTPOAuthTest` cases cover: the 403 insufficient_scope path
re-authorizes with the escalated scope from the challenge and retries
the original request with the new bearer token; a plain 403 without
the `insufficient_scope` challenge is surfaced as
`error_type: :forbidden` with no OAuth side effects; repeated
`insufficient_scope` responses retry at most once and then surface the 403;
a provider with a saved `refresh_token` still goes through
the full authorization request rather than exchanging the refresh token,
because the existing scope set is precisely what was rejected.
Conformance: `auth/scope-step-up` now passes 22/22 with no warnings.
`bundle exec rake test`, `bundle exec rake rubocop`, and
`bundle exec rake conformance` are all green.
## Breaking Changes
None. Behaviour on 401 is unchanged. A 403 without the `insufficient_scope`
Bearer challenge still raises the same `RequestHandlerError` as before.
The new retry only fires when both the WWW-Authenticate header signals step-up
and the transport was constructed with an OAuth provider.
## Motivation and Context
The MCP specification defines an optional `size` field on the `Resource`
type, added in spec revision 2025-06-18 and retained in 2025-11-25:
https://modelcontextprotocol.io/specification/2025-11-25/server/resources
> The size of the raw resource content, in bytes (i.e., before base64
> encoding or any tokenization), if known. This can be used by Hosts to
> display file sizes and estimate context window usage.
`MCP::Resource` was missing this field, so servers had no way to declare a
resource's byte size. Without it, hosts cannot show file sizes or estimate
context window usage before reading the resource contents.
This aligns the Ruby SDK with the spec, matching the TypeScript SDK
(modelcontextprotocol/typescript-sdk#1574).
## How Has This Been Tested?
Added tests in `test/mcp/resource_test.rb`:
- `#to_h` omits `size` when nil
- `#to_h` includes `size` when present
- `#to_h` includes `size` when zero (distinguishes an unset size from a
0-byte resource)
The full unit suite and RuboCop pass locally.
## Breaking Changes
None. `size:` is a new optional keyword argument defaulting to `nil`, and it
is omitted from `#to_h` output when not set, so existing callers are unaffected.
## Motivation and Context
`MCP::Tool::Schema` previously used the pure-Ruby `json-schema` gem for
both construction-time metaschema validation and runtime argument /
result validation. For deep schemas this cost ~32-100ms per
construction (see issue #364).
`json_schemer` (https://rubygems.org/gems/json_schemer, v2.5.0) is
an actively maintained alternative that is much faster on this workload.
Switching reduces cold-start warming pressure in horizontally scaled
multi-tenant deployments (the scenario raised in #364) and brings
runtime data validation down to sub-millisecond per call once
the per-instance schemer is memoized.
The implementation preserves the legacy behavior of the `json-schema`
based code. Metaschema is pinned to draft-04 (`meta_schema:` option);
the `$schema` dialect URI is still emitted in `to_h` as 2020-12
but runtime validation continues to use draft-04, exactly as before.
Moving the runtime validator itself to 2020-12 is out of scope for
this PR and warrants its own discussion. `format` keywords are not enforced
(`format: false` option), matching what `json-schema`'s draft-04 path did.
Malformed schemas (e.g. an invalid `pattern` regex) continue to
surface as `ArgumentError, "Invalid JSON Schema: ..."`;
the `RegexpError` `json_schemer` raises during construction is wrapped.
`Symbol` values in argument data are coerced to strings inside
the internal `stringify` helper so they validate against `type: "string"`
the same way they did before.
The public `Schema#schema` accessor is dropped. It was a refactor
artifact from #198 (the consolidation of `InputSchema`'s
`properties` / `required` readers into a single hash) with no callers
in `lib/`; tests that needed the merged hash now read it through
`to_h`. The accessor's only remaining role would have been to expose
a mutation path that could desynchronize the memoized `@schemer`,
which this change removes.
Runtime dependency delta: drops `json-schema` (and `addressable`),
adds `json_schemer`, `hana`, `regexp_parser`, and `simpleidn`. Each added
gem is a single-purpose library tied to JSON Schema spec compliance.
Closes#364.
## How Has This Been Tested?
Side-by-side benchmark on representative schemas (simple, with `$ref` /
`additionalProperties`, nested, depth 20, depth 40):
construction-time metaschema validation is 4.7x to ~100x faster;
runtime data validation with the memoized schemer is sub-millisecond
across all sizes.
Four existing tests had their stub targets or message assertions updated
to track the new validator while preserving the original test intent.
The "unexpected errors bubble up" tests in `input_schema_test.rb`
and `output_schema_test.rb` now stub `JSONSchemer::Schema#validate`
instead of `JSON::Validator.fully_validate`. The cache tests in
`schema_test.rb` now stub `JSONSchemer::Schema#validate_schema`.
The two "detailed error message" tests in `tool_test.rb` switched from
asserting `json-schema`'s exact wording to format-agnostic substrings
(`"properties/count/minimum"`, `"number"`). The "required arguments are
converted to strings" test in `input_schema_test.rb` now reads the result
through `to_h[:required]` instead of the removed `schema` accessor.
Regression tests added for the legacy-behavior preservations above:
`format` keyword is not enforced, invalid `pattern` raises `ArgumentError`
(not `RegexpError`), and `Symbol` values validate against `type: "string"`.
## Breaking Changes
`Schema#schema` is no longer a public method. The accessor had no callers
outside the test suite, but anyone reading the internal representation
directly (rather than through `to_h`) will need to switch.
`Schema` / `InputSchema` / `OutputSchema` otherwise keep
their constructor signatures, `to_h` output, `ValidationError` /
`ArgumentError` raise points, and the `$schema` dialect emission.
The validator error message wording inside `ArgumentError` and
`ValidationError` now comes from `json_schemer` and still includes
the JSON pointer path and a description of the mismatch.
## Motivation and Context
SEP-2207 describes how an OAuth client obtains refresh tokens: it
declares the `refresh_token` grant type in its client metadata and
requests the `offline_access` scope, but only when the authorization
server advertises `offline_access` in its metadata `scopes_supported`.
Requesting `offline_access` when the server does not list it is forbidden.
The Ruby SDK already supports the refresh grant (`Flow#refresh!`) but never
requested `offline_access`, so it could not obtain a refresh token from a server
that gates it behind that scope. This aligns the SDK with the Python and TypeScript SDKs
and makes the `auth/offline-access-scope` conformance scenario pass
(previously it reported one warning, `sep-2207-client-metadata-grant-types`,
and was listed in the expected-failures baseline).
The change adds:
- `Flow#augment_scope_with_offline_access`, called from `run!` after
`resolve_scope`, appends `offline_access` to the requested scope when
both the client opted into refresh tokens (its registered
`grant_types` include `refresh_token`) and the authorization server
advertises `offline_access` in its metadata `scopes_supported`.
Already-present `offline_access` is not duplicated. Gating on the server
advertisement keeps the SDK from ever requesting the scope where it is not supported.
- `conformance/client.rb` declares `refresh_token` in `grant_types`, an honest reflection
of the SDK's refresh support, which clears the SEP-2207 grant-types warning.
- `auth/offline-access-scope` is removed from `conformance/expected_failures.yml`.
## How Has This Been Tested?
New `Flow` tests cover: `offline_access` is requested when the server advertises it
and the client declared the `refresh_token` grant; `offline_access` is NOT requested
when the client did not declare the grant; `offline_access` is NOT requested
when the server does not advertise it (even with the grant declared);
and `offline_access` is not duplicated when it is already part of the resolved scope.
Conformance: `auth/offline-access-scope` now passes 14/14 with no warnings,
and `auth/offline-access-not-supported` still passes 13/13 (no regression).
`bundle exec rake test`, `bundle exec rake rubocop`, and `bundle exec rake conformance`
are all green.
## Breaking Changes
None. `offline_access` is appended only when the client's own `grant_types` opt
into refresh tokens and the authorization server advertises the scope, so existing clients
that do neither see no change in the scope they request.
## Motivation and Context
`MCP::Tool::Schema#initialize` validated every instance against the draft-04 metaschema
via `JSON::Validator.fully_validate`, costing ~32ms for deep schemas (up to ~100ms).
When schemas are built dynamically and repeatedly, this work is wasted because
the result depends only on the schema content.
This caches successful validations by a content digest, so an identical schema is validated
once and subsequent constructions skip the traversal (~100ms to ~0.1ms on a cache hit).
The cache is bounded and thread-safe. It supersedes the `validate: false` escape hatch proposed
in #362, which would have added permanent public interface and allowed invalid schemas
to reach clients.
Python and TypeScript SDKs do not metaschema-validate schema definitions, so this cost is specific
to the Ruby SDK; caching reduces it without weakening the default or changing validation semantics.
## How Has This Been Tested?
Added regression tests in `test/mcp/tool/schema_test.rb`: identical schemas validate only once,
distinct schemas validate separately, a cache hit still yields a usable and correctly validated schema,
invalid schemas raise on every construction and are not cached, a schema at the normalization depth limit
is cached without a nesting error, and `ValidationCache` evicts the oldest entry beyond its max size.
The full suite (`rake test`) and `rake rubocop` pass.
## Breaking Changes
None. Validation safety is preserved: every distinct schema is still validated, and invalid schemas
continue to raise. The initializer signature and validation semantics are unchanged.
## Motivation and Context
The MCP 2025-11-25 authorization specification and `draft-ietf-oauth-client-id-metadata-document-00` define
Client ID Metadata Documents (CIMD): a client publishes its OAuth metadata at an HTTPS URL and uses that URL
as the OAuth `client_id` instead of going through Dynamic Client Registration. The Python and TypeScript SDKs
already implement this; the Ruby SDK now reaches parity.
The change adds:
- `MCP::Client::OAuth::Provider` accepts an optional `client_id_metadata_document_url:` keyword.
- A new `Discovery.client_id_metadata_document_url?` validator enforces structural requirements.
Spec-required: `https` scheme, a non-root path, and no fragment, userinfo, or `.`/`..` segments
(including the percent-encoded form `%2E`). Stricter than the draft as an SDK policy: query strings
are also rejected, because different encodings of the same query would yield distinct `client_id` strings for
the same logical document. The loopback `http` carve-out used for discovery URLs does not extend to CIMD URLs,
since the value is sent verbatim to the authorization server as the OAuth `client_id` and travels off-loopback.
Validation failures raise `Provider::InvalidClientIDMetadataDocumentURLError`.
- `Flow#ensure_client_registered` routes through CIMD only when the authorization server advertises
`client_id_metadata_document_supported` as JSON `boolean true`; truthy non-boolean values
(string `"true"`, `"false"`, etc.) fall back to DCR, matching the gating in the Python and TypeScript SDKs.
- The CIMD `client_id` is NOT persisted to storage. AS support is re-read on every flow so a server
that later drops CIMD support stops receiving the stale URL. Pre-registered `client_information`
continues to win over CIMD when both are available.
- `Flow#refresh!` reconstructs the CIMD `client_id` from live AS metadata when refreshing tokens obtained via CIMD.
When support has been withdrawn and no other identity is stored, it raises a clear `AuthorizationError` rather than
sending a `client_id` the authorization server no longer recognises.
- The Provider docstring and README OAuth section explain that DCR `client_metadata` and the JSON document served at
the CIMD URL are separate artifacts: DCR metadata MUST NOT include `client_id`, while the CIMD document MUST include
`client_id` set to the URL, `client_name`, and `redirect_uris` covering `redirect_uri`.
- `auth/basic-cimd` is removed from `conformance/expected_failures.yml`.
## How Has This Been Tested?
`Discovery` tests cover: https with path accepted; non-https rejected (http, ftp, file); root and empty path rejected;
fragment, query, and userinfo rejected; dot segments rejected including the percent-encoded form `%2E`; nil, empty,
and malformed inputs rejected.
`Provider` tests cover: the default `nil`; rejection of http URLs (loopback included); non-https schemes;
root and empty path; fragment; query; userinfo; and dot segments.
`Flow#run!` tests cover: skip DCR when the authorization server advertises CIMD and the provider has a URL;
fall back to DCR when the authorization server does not advertise support; fall back to DCR when the value is
the string `"false"` or `"true"`; pre-registered `client_information` wins over CIMD; the CIMD `client_id` is not
persisted to storage; a second flow against an authorization server that has dropped CIMD support recovers via DCR.
`Flow#refresh!` tests cover: refresh reconstructs the CIMD `client_id` without a stored `client_information`;
refresh raises when the authorization server no longer advertises CIMD support; stored `client_information`
takes precedence over the CIMD URL during refresh.
Conformance: `auth/basic-cimd` now passes 12/12 with no warnings. `bundle exec rake test`, `bundle exec rake rubocop`,
and `bundle exec rake conformance` are all green.
## Breaking Changes
None. The `client_id_metadata_document_url:` keyword is purely opt-in and defaults to `nil`.
When the keyword is omitted, the DCR flow is unchanged. Existing OAuth users see no behaviour change.
The CIMD path is only entered when both the user explicitly configures a URL and the authorization server
advertises support via `client_id_metadata_document_supported: true`.
## Motivation and Context
RFC 9110 defines media type comparison as case-insensitive,
but `parse_accept_header` compared types without normalizing case.
This caused `Application/JSON` or `TEXT/Event-Stream` to be rejected
with 406 Not Acceptable.
## How Has This Been Tested?
Added tests for mixed-case Accept headers:
- `Accept: Application/JSON, Text/Event-Stream` succeeds for POST
- `Accept: TEXT/EVENT-STREAM` succeeds for GET SSE
## Breaking Changes
None. This is a bug fix bringing behavior into conformance with RFC 9110.
## Motivation and Context
The MCP specification defines `ping` as a bidirectional utility: either party may issue it.
https://modelcontextprotocol.io/specification/2025-11-25/basic/utilities/ping
The previous PR added `MCP::Client#ping`. This PR adds the symmetric server-side send capability,
`ServerSession#ping`.
This aligns the Ruby SDK with the Python SDK (`ServerSession.send_ping`) and
the TypeScript SDK (`Server.ping()`), both of which expose a server-initiated ping.
In practice this enables a Ruby MCP server to health-check non-Ruby clients
(e.g., Claude Desktop, the Python or TypeScript SDK client) during long-running tool operations.
Scope is intentionally server-only: this PR does not add client-side inbound request dispatch,
which is a larger refactor outside the ping utility. A Ruby `MCP::Client` therefore still cannot receive
a server-initiated ping; that gap is tracked as a separate follow-up.
## How Has This Been Tested?
New file `test/mcp/server_session_ping_test.rb` covers:
- success (empty `result` returned)
- `related_request_id` propagated through the transport when a session ID is set
- `ValidationError` when the transport returns `nil`
- `ValidationError` when the transport returns a non-Hash `result`
- transport-level errors propagate unchanged
- ping succeeds without any client capability declaration (per spec, ping has no capability gate)
`test/mcp/server_context_test.rb` adds two tests for `ServerContext#ping` delegation
(happy path and `NoMethodError` when the session lacks `#ping`).
The existing server-side `ping` handler tests continue to pass unchanged.
## Breaking Changes
None. `MCP::ServerContext#ping` and `MCP::Server::ValidationError` are purely additive.
## Motivation and Context
The Ruby SDK accepted duplicate `initialize` requests after a session was already initialized.
On stdio, a second `initialize` silently overwrote the per-session `clientInfo` and `clientCapabilities`
(including with an older `protocolVersion`). On Streamable HTTP, every `initialize` minted a fresh
`Mcp-Session-Id` and `ServerSession`, abandoning the originally negotiated session.
MCP specification (`2025-06-18` / `2025-11-25` lifecycle) states that the initialization phase
MUST be the first interaction between client and server;
re-initialization on an established session is not part of the defined lifecycle.
TypeScript SDK rejects duplicate `initialize` on a live session with HTTP 400 + JSON-RPC `-32600`
("Invalid Request: Server already initialized"), and Python SDK does not mint a new session
on duplicate `initialize`. The Ruby SDK was the outlier; this change aligns it with the TypeScript SDK.
- `ServerSession` tracks an `@initialized` flag, exposed via `initialized?` and
set by `mark_initialized!` after a successful `initialize` response.
- `Server#init` raises `RequestHandlerError(error_type: :invalid_request)` when
the session is already initialized, which the existing error mapping converts
to JSON-RPC `-32600 Invalid Request`.
- `StreamableHTTPTransport#handle_post` short-circuits at the transport layer:
duplicate `initialize` against a live session returns HTTP 400 + JSON-RPC
`-32600`; a stale or expired `Mcp-Session-Id` returns 404 (evicting the expired entry
instead of misreporting it as a duplicate).
- `handle_initialization` evicts the registered session and omits the `Mcp-Session-Id`
header when the first `initialize` fails before `mark_initialized!` is reached,
so retries do not collide with an orphaned ID.
- Non-Hash JSON-RPC POST bodies (e.g. batched arrays, which are not supported in `2025-11-25`)
are explicitly rejected with HTTP 400 + JSON-RPC `-32600` rather than falling through to
an unparseable Rack response.
## How Has This Been Tested?
- Server tests: a second `initialize` on the same `ServerSession` returns
`code: -32600` and the original `clientInfo` is preserved.
- Streamable HTTP tests: duplicate `initialize` with a live `Mcp-Session-Id`
returns HTTP 400 + `-32600` and the original session remains usable for
subsequent `ping`; stale `Mcp-Session-Id` returns 404; an idle-expired
session is evicted on duplicate `initialize` and returns 404; a failed
`initialize` (invalid `jsonrpc` envelope) does not leak `Mcp-Session-Id` and
leaves `@sessions` empty; an array body is rejected with HTTP 400 + `-32600`.
- Stdio tests: a second `initialize` on the same stdio session returns
`code: -32600` and the original `clientInfo` is preserved.
## Breaking Changes
Clients that previously sent `initialize` more than once on the same session
now receive a JSON-RPC error with `code: -32600` for the second and later requests
instead of silently overwriting session state (stdio) or being re-issued
a new `Mcp-Session-Id` (Streamable HTTP). Clients that follow the MCP specification
(single `initialize` per session) are unaffected.
Additionally, non-Hash JSON-RPC POST bodies on Streamable HTTP now return
HTTP 400 + JSON-RPC `-32600` rather than falling through to a broken Rack response.
The previous behavior produced an unparseable response, so this is unlikely to
affect any working client.
Closes#349.
## Motivation and Context
MCP 2025-11-25 does not support JSON-RPC batch (batch support was removed in 2025-06-18),
so request bodies are expected to be a single JSON-RPC message object. The previous code path:
```ruby
body = parse_request_body(body_string)
return body unless body.is_a?(Hash)
```
returned the parsed JSON value as if it were a Rack response when
the body was a JSON array (former batch shape), a string, a number,
or any other non-Hash JSON value. This produced a malformed Rack response
instead of a proper HTTP 400.
This was a pre-existing bug exposed during follow-up review of #347
(`MCP-Protocol-Version` header validation), which surfaced it but did not fix
the broken response shape for non-Hash bodies sent with a valid header.
### Behavior
- `parse_request_body` now raises a private `InvalidJsonError` on parse
failure instead of returning a Rack response tuple. The overloaded
return type and the `parse_error_tuple?` discriminator are gone.
- `handle_post` rescues `InvalidJsonError` and returns the same plain
JSON 400 response as before (`{"error":"Invalid JSON"}`), so parse
error handling is observably unchanged.
- Non-Hash parsed bodies (arrays, strings, numbers, booleans, null) now
return HTTP 400 with a plain JSON body explaining that the body must
be a single JSON-RPC message object, instead of producing a malformed
Rack response.
The error response shape stays in the existing plain JSON style for
consistency with `validate_content_type`, `not_acceptable_response`,
and the other transport-level error helpers. Unifying all of these to
a JSON-RPC error envelope (matching the Python and TypeScript SDKs) is
deferred to a separate follow-up.
### SDK Comparison
- Python SDK (`src/mcp/server/streamable_http.py`): Already rejects
non-Hash bodies (Array, primitive) with HTTP 400. Uses a JSON-RPC
error envelope with `INVALID_PARAMS`.
- TypeScript SDK (`packages/server/src/server/streamableHttp.ts`):
As of `main`, still processes JSON arrays as JSON-RPC batches and
has not yet caught up with the 2025-06-18 batch removal. Primitives
fail schema validation and return 400 with a JSON-RPC error envelope.
This change brings the Ruby SDK in line with the current MCP spec
(no batch). The Ruby SDK is now closer to the spec than the TypeScript
SDK's `main` branch on this specific point.
## How Has This Been Tested?
Existing regression test `test "handles POST request with invalid
JSON"` continues to pass unchanged (plain JSON response preserved).
Added new regression tests:
- POST with a JSON array body returns 400 with a clear error message
- POST with a non-object JSON body (e.g. `"foo"`) returns 400
`bundle exec rake test` and `bundle exec rake rubocop` both pass.
## Breaking Changes
None for compliant clients sending single JSON-RPC message objects.
Clients that were sending JSON arrays (batch requests, no longer
supported as of MCP 2025-11-25) or other non-object bodies will now
receive a proper HTTP 400 with a JSON error body instead of
the previous malformed Rack response; no client could have relied on
the broken pre-existing behavior.
## Motivation and Context
The MCP Authorization spec (2025-11-25) requires clients to support
Protected Resource Metadata discovery (RFC 9728), Authorization
Server Metadata discovery (RFC 8414), Dynamic Client Registration,
and OAuth 2.1 Authorization Code grant with PKCE (S256). The Ruby SDK
previously had no client-side OAuth support: the HTTP transport raised
`RequestHandlerError` on a 401 with no recovery, and 21 `auth/*` scenarios
were listed as known failures in `conformance/expected_failures.yml`.
This aligns the Ruby SDK with the Python and TypeScript SDKs,
both of which expose a pluggable OAuth client provider that drives
the full discovery + DCR + authorization + token exchange flow.
`MCP::Client::OAuth::Provider` mirrors that surface: callers supply
`client_metadata`, a `redirect_uri`, and pluggable `redirect_handler`
/ `callback_handler` hooks plus a token/client information storage.
`MCP::Client::OAuth::InMemoryStorage` is provided as a default.
`MCP::Client::HTTP` accepts a new optional `oauth:` keyword. When present,
the transport attaches `Authorization: Bearer` to every request,
and on a 401 parses `WWW-Authenticate` for the `resource_metadata` URL
and `scope` challenge, drives the discovery + DCR + authorization code flow
through the provider, and retries the failed request once with the acquired token.
Spec compliance details:
- The `WWW-Authenticate` parser handles multiple challenges
(e.g. `Basic ..., Bearer ...` or `Bearer ..., DPoP ...`), extracting only
the parameters that belong to the Bearer challenge.
- The PRM `resource` value is required to cover the MCP server URL
(same scheme/host/port, with the PRM path as a prefix of the server path)
before the flow continues, preventing redirection of issued tokens to a different audience.
- Both authorization and token requests always include a `resource`
parameter (RFC 8707), defaulting to a canonicalized form of
the MCP server URL when PRM does not advertise one.
- `client_secret_basic`, `client_secret_post`, and `none` token endpoint
authentication methods are supported. When pre-registered client information
specifies no `token_endpoint_auth_method`, the transport defaults to
`client_secret_basic` per RFC 6749 §2.3.1 an dthe TS/Python SDK convention.
Pre-registered client credentials supplied via `Storage#save_client_information`
with either string or symbol keys are honored, skipping DCR.
- Scope resolution follows the spec order: the `WWW-Authenticate` challenge scope wins first,
then PRM `scopes_supported`, and `Provider#scope` is the last-resort fallback only
if neither is supplied (the provider-supplied scope must not pre-empt server-advertised scope).
- Token endpoint error responses (RFC 6749 §5.2) are parsed: a 4x with
`error: "invalid_grant"` raises `Flow::InvalidGrantError`,
so `MCP::Client::HTTP` can discard the stored refresh token only when
the AS truly says it is dead. Generic `AuthorizationError`
(5xx, network failures, other error codes) leaves the refresh token
intact, so a transient AS outage does not force interactive reauth
on the next attempt.
- The OAuth `state` parameter is compared via
`OpenSSL.fixed_length_secure_compare` (with a `bytesize` guard) to
prevent timing-based discovery of the expected value.
- The 401 retry guard is a request-scoped local variable, so an MCP server
that keeps returning 401 is surfaced as an error after one
retry rather than triggering an infinite re-authorization loop.
## How Has This Been Tested?
Unit tests cover PKCE generation, multi-challenge `WWW-Authenticate` parsing,
PRM and Authorization Server metadata URL builders, the full Flow orchestrator
(success path, state mismatch, missing PKCE support, skipping DCR for both string
and symbol-keyed preregistered client information, `client_secret_basic`
token endpoint authentication, PRM `resource` mismatch rejection, fallback to
the server URL when PRM omits `resource`, scope resolution preferring PRM
`scopes_supported` over `Provider#scope`, default `client_secret_basic` for
confidential clients without an explicit `token_endpoint_auth_method`,
and the new `InvalidGrantError` vs generic `AuthorizationError` split for
token endpoint rejections), and the HTTP transport behavior
(401 recovery + retry, no-provider fallthrough, no infinite loop on repeated 401,
no infinite loop on flow failure, refresh-token retention on transient 5xx from
the token endpoint).
Conformance: `bundle exec rake conformance` newly passes 16 `auth/*`
scenarios beyond the existing baseline, including
`auth/metadata-default`, `metadata-var{1,2,3}`,
`scope-from-www-authenticate`, `scope-from-scopes-supported`,
`scope-omitted-when-undefined`, `scope-retry-limit`,
`token-endpoint-auth-{basic,post,none}`, `pre-registration`,
`resource-mismatch`, and `offline-access-not-supported`. Remaining
`auth/*` scenarios stay in `expected_failures.yml`.
`bundle exec rake test rubocop` is clean.
## Breaking Changes
None. `MCP::Client::HTTP#initialize` accepts a new optional `oauth:`
keyword that defaults to `nil`, preserving existing behavior. When unset,
the transport raises `MCP::Client::RequestHandlerError` on a 401 exactly as before.
## Motivation and Context
When an `initialize` POST carries an `MCP-Protocol-Version` HTTP header that disagrees with
`params.protocolVersion` in the JSON-RPC body, the Streamable HTTP server accepts the request
and negotiates using the body value. The behavior was already encoded in `handle_post`
(the header check is skipped on `initialize`) but it was not stated in the code and there was
no regression test for the specific mismatch case.
MCP 2025-06-18 / 2025-11-25 only requires `MCP-Protocol-Version` on requests subsequent to
`initialize`, and the spec does not require the header and body to agree on the initial `initialize`.
All official MCP SDKs (TypeScript, Python, Rust, Java, Go, PHP) accept the mismatch and
treat the JSON-RPC body as authoritative.
## How Has This Been Tested?
Streamable HTTP tests: two new regression tests confirm that on an `initialize` POST
with a supported but mismatched `MCP-Protocol-Version` header, the server returns
HTTP 200 and the response's `result.protocolVersion` matches the JSON-RPC body value,
in both mismatch directions (header older / body newer, and header newer / body older).
## Breaking Changes
None. The behavior is unchanged: `initialize` requests with a mismatched `MCP-Protocol-Version` header
are still accepted, and the JSON-RPC body `params.protocolVersion` continues to drive negotiation.
This commit only adds an explanatory comment and regression tests.
Closes#351.
## Motivation and Context
MCP 2025-11-25 (basic/transports#protocol-version-header) requires servers
to respond with `400 Bad Request` when receiving a request with an invalid
or unsupported `MCP-Protocol-Version` header:
> If the server receives a request with an invalid or unsupported
> `MCP-Protocol-Version`, it MUST respond with `400 Bad Request`.
The Ruby SDK was not reading the header at all, accepting any value
(including malformed strings like `not-a-version` and unsupported versions
like `1900-01-01`) and dispatching requests normally with HTTP 200.
## Behavior
`StreamableHTTPTransport` now validates the `MCP-Protocol-Version` header
on POST (non-initialize), GET, and DELETE requests. Missing headers are
accepted as before; the spec SHOULD requirement to default to `2025-03-26`
is intentionally left for a follow-up. The `initialize` POST is exempt
because the client does not know the negotiated version until the response
arrives, matching the Python (`src/mcp/server/streamable_http.py`) and
TypeScript (`packages/server/src/server/streamableHttp.ts`) SDKs.
The error response uses a JSON-RPC envelope with `code: -32600`
(`INVALID_REQUEST`) to match the Python SDK shape:
```json
{
"jsonrpc": "2.0",
"id": null,
"error": {
"code": -32600,
"message": "Bad Request: Unsupported protocol version: <value>. Supported versions: ..."
}
}
```
Validation order is session then protocol version, matching the Python and
TypeScript SDKs.
`handle_post` was reorganized so that non-Hash request bodies (e.g., JSON
arrays, which MCP 2025-11-25 no longer supports as batches) also pass
through the header check. The pre-existing broken response for Array
bodies sent with a valid header is unchanged and is tracked as a separate
follow-up.
## How Has This Been Tested?
Added regression tests covering:
- POST `initialize` ignores the header (bypass)
- POST non-initialize with unsupported / malformed / valid / missing values
- POST array body with unsupported value returns 400
- GET with unsupported / missing values
- DELETE with unsupported value in both stateful and stateless modes
- DELETE validates session before protocol version
`bundle exec rake test` and `bundle exec rake rubocop` both pass.
## Breaking Changes
Strictly additive for compliant clients. Third-party clients sending stale
or malformed `MCP-Protocol-Version` values will now receive `400` instead
of `200`, which is the intended spec behavior.
Fixes#346.
## Motivation and Context
MCP 2025-11-25 (SEP-1613) establishes JSON Schema 2020-12 as the default dialect
for MCP schema definitions.
https://github.com/modelcontextprotocol/modelcontextprotocol/issues/1613
The Ruby SDK was emitting tool input and output schemas with no `$schema` field,
leaving the dialect implicit and inconsistent with the TypeScript SDK
(`packages/core/src/util/standardSchema.ts`, which emits with `target: 'draft-2020-12'`)
and the Python SDK (which preserves `$schema` in its types and conformance fixtures).
`Tool::Schema#to_h` now includes `"$schema": "https://json-schema.org/draft/2020-12/schema"`
unless the user supplied a different `$schema` value, so clients see the canonical dialect URI
on the wire.
Runtime metaschema and argument validation remain on draft-04 because the `json-schema` gem
does not yet support 2020-12. Switching the runtime validator is left as a separate change
because it requires either replacing the gem or waiting for upstream 2020-12 support.
## How Has This Been Tested?
Updated `Tool::Schema#to_h` expectations across `input_schema_test`, `output_schema_test`,
`tool_test`, and the `tools/list` server tests to reflect the new `$schema` field.
Added focused regression tests:
- `to_h` preserves a user-supplied `$schema` URI rather than overwriting it
(covered for both symbol-keyed input and the string-keyed Hash form that
goes through the initializer's `symbolize_names` normalization)
- `validate_arguments` / `validate_result` continue to work when the user supplies
a 2020-12 `$schema` URI on the schema (the validator strips the unknown top-level
dialect URI before invoking the draft-04 validator, instead of raising `JSON::Schema::SchemaError`)
- `tools/list` JSON-RPC response includes the 2020-12 `$schema` on both `inputSchema`
and `outputSchema` (transport-boundary assertion)
`bundle exec rake test` and `bundle exec rake rubocop` both pass.
## Breaking Changes
Additive change. Tolerant consumers of the `tools/list` payload are unaffected.
Consumers that strictly assert hash equality on the emitted `inputSchema` / `outputSchema`
need to account for the new `$schema` key, but no schema semantics change.
Schemas using 2020-12-only keywords (e.g. `prefixItems`, nested `$schema` on subschemas)
are still rejected by the draft-04 metaschema validator, as before.
Lifting that restriction depends on adopting a 2020-12-capable validator and is out of scope
for this change.
## Motivation and Context
This commit implements Phase 1 of 3 for #334.
The MCP specification requires an `initialize` request followed by
a `notifications/initialized` notification before any other interaction.
PR #327 added `MCP::Client#connect` and `MCP::Client::HTTP#connect`
to expose this handshake explicitly for the HTTP transport,
but stdio remained on its private `initialize_session` lazy-init path,
inconsistent with the Python SDK (`ClientSession.initialize()`) and
TypeScript SDK (`Client.connect(transport)`),
both of which require an explicit handshake call regardless of transport.
The implicit init path on the first `send_request` is
preserved as a non-breaking compatibility shim. Public API added on `Stdio`:
- `connect(client_info:, protocol_version:, capabilities:)` performs the
handshake, validates the negotiated `protocolVersion` against
`MCP::Configuration::SUPPORTED_STABLE_PROTOCOL_VERSIONS`,
caches the `InitializeResult`, and is idempotent.
- `connected?` reports handshake completion.
- `server_info` exposes the cached `InitializeResult`.
Documentation and examples are updated so new users learn the explicit pattern
from the start.
## How Has This Been Tested?
Fifteen regression tests cover: explicit handshake, `server_info` caching,
idempotence, custom keyword arguments, JSON-RPC error response, missing
or non-Hash `result`, unsupported protocol version with state rollback,
state rollback when the `notifications/initialized` write fails,
retry after a failed handshake, and the `connected?` / `server_info` lifecycle.
The pre-existing stdio tests pass without modification, verifying that
the implicit-init compatibility path still works.
## Breaking Changes
None for the typical "implicit init via `client.tools` / `client.call_tool`" usage.
Existing stdio clients keep working unchanged.
Three observable behavior changes for code that inspects transport state directly:
- `Client#connected?` for a never-initialized stdio client returns `false`
(previously fell through to a `true` default via the `respond_to?` fallback).
- `Client#server_info` for stdio returns the cached `InitializeResult`
after the handshake (previously always `nil` via the fallback).
- The implicit handshake path now validates the server's negotiated
protocol version, raising `RequestHandlerError` for unsupported versions.
Production servers that return one of the supported versions are unaffected;
this closes a pre-existing spec-conformance gap on stdio.
## Motivation and Context
The MCP specification defines `notifications/cancelled` so either party can stop
a previously-issued in-flight request. The Ruby SDK declared the method constant
but had no receive logic, no in-flight tracking, and no way for handlers to participate
in cancellation; cancellation notifications fell through to the unsupported-method path.
This PR implements the **server-side** half of the spec. The server stops processing
the targeted request cooperatively and suppresses its JSON-RPC response, matching
the Python SDK's anyio `CancelScope` and the TypeScript SDK's `RequestHandlerExtra.signal`.
Cancellation is observable by every user-overridable request handler:
- `Tool.call` (tools/call)
- prompt templates (prompts/get)
- blocks registered via `resources_read_handler` / `completion_handler` /
`resources_subscribe_handler` / `resources_unsubscribe_handler` / `define_custom_method`
Each handler opts in by declaring a `server_context:` keyword and polls `server_context.cancelled?`
or calls `server_context.raise_if_cancelled!` (raising `MCP::CancelledError`) inside long-running work.
Handlers that keep their existing `|params|` (or `|args|`) signature continue to work unchanged.
On `StreamableHTTPTransport`, cancelling a parent `tools/call` automatically cancels n
ested server-to-client requests (`sampling/createMessage`, `elicitation/create`);
the nested `send_request` raises `MCP::CancelledError` and a cancel notification is routed to
the peer on the parent's POST response stream. `StdioTransport` is single-threaded and blocks on `$stdin.gets`,
so it deliberately does not propagate nested cancellation.
Tools running on stdio still observe cancellation between calls via `server_context.cancelled?`.
The design is cooperative-only (no `Thread#raise`) because preemptive cancellation is unsafe
across Rack adapters and arbitrary handler code. The `initialize` request is never cancellable,
satisfying the spec rule that it MUST NOT be cancelled. Unknown / completed / duplicate cancel notifications
are silently ignored per the spec.
`MCP::Client#cancel` (an equivalent that aborts the calling thread's synchronous wait) is deferred to a follow-up PR.
Ref: https://modelcontextprotocol.io/specification/2025-11-25/basic/utilities/cancellation
## How Has This Been Tested?
`test/mcp/cancellation_test.rb` covers the `MCP::Cancellation` token contract.
`test/mcp/server_cancellation_test.rb` covers end-to-end cancellation:
- A handler spins on `cancelled?` in a background thread; the test sends `notifications/cancelled`
and asserts the handler observed cancellation and the JSON-RPC response was suppressed.
Each user-overridable handler type (tool, prompt template, resources/read, completion, custom method)
has its own regression test.
- `initialize` is not cancellable; unknown / duplicate / late-after-completion cancels are silently ignored.
- The `reason` propagates into the `cancellation_reason` instrumentation field.
- Custom transports implementing only the abstract `(method, params = nil)` contract keep working;
the new kwargs (`session_id:`, `related_request_id:`, `parent_cancellation:`, `server_session:`)
are silently dropped when the transport's signature does not declare them.
`StreamableHTTPTransport` tests cover nested cancellation, hook deregistration after normal completion
(so a late parent cancel does not emit a stray `notifications/cancelled`), and the first-writer-wins race
when a real response and a cancel arrive concurrently.
## Breaking Change
None. `MCP::ServerContext#initialize` gains an optional `cancellation:` keyword (defaults to `nil`),
and `StreamableHTTPTransport#send_request` / `#send_notification` gain optional cancellation kwargs.
The abstract `Transport` base class and `StdioTransport` keep their existing `(method, params = nil)` signatures,
and custom transports following those signatures continue to work. `StreamableHTTPTransport` now dispatches
client-originated notifications through `ServerSession#handle_json` before returning 202;
previously these were accepted without dispatch, but the existing handlers for `notifications/initialized`
and `notifications/progress` were already no-ops, so no user-visible effect is expected.
Adding `server_context:` to a handler block is strictly opt-in.
## Motivation and Context
MCP 2025-11-25 (SEP-1303) clarifies that input validation errors for `tools/call`
should be returned as Tool Execution Errors (`{ content: [...], isError: true }`)
rather than as JSON-RPC `-32602` protocol errors, so models can observe
the validation message and self-correct on a follow-up call.
https://github.com/modelcontextprotocol/modelcontextprotocol/issues/1303
This is a clarification rather than a brand-new requirement: the 2024-11-05, 2025-03-26,
and 2025-06-18 specifications all defined two error categories with overlapping language
("Invalid arguments" listed under Protocol Errors *and* "Invalid input data" listed under
Tool Execution Errors), leaving the routing of JSON-Schema validation failures ambiguous.
The Ruby SDK had selected the "Protocol Errors / Invalid arguments" interpretation,
while the TypeScript SDK (`packages/server/src/server/mcp.ts`, which wraps
`validateToolInput` errors via `createToolError`) and Python SDK's FastMCP
(which routes through the generic `is_error=True` path) had selected the other.
SEP-1303 in 2025-11-25 disambiguates this by replacing the bullets with
"Malformed requests (requests that fail to satisfy CallToolRequest schema)"
under Protocol Errors and "Input validation errors (e.g., date in wrong format,
value out of range)" under Tool Execution Errors, and explicitly states that the latter
"contain actionable feedback that language models can use to self-correct".
`tool_not_found` continues to be returned as a JSON-RPC `-32602` protocol error since
the spec change only covers input validation.
## How Has This Been Tested?
Updated existing tests that previously asserted `-32602` and "Invalid arguments" /
"Missing required arguments" in the JSON-RPC error data to instead
assert `result[:isError] == true` with the same text in the `content` block.
Added new regression tests covering:
- Instrumentation still records `:missing_required_arguments` and
`:invalid_schema` on the new non-raising path
- Nested schema validation failure (deep arrays of objects with
required fields) returns a tool execution error rather than a
protocol error
- `tool_not_found` continues to return JSON-RPC `-32602` (regression
guard against accidentally widening the change)
`bundle exec rake test` and `bundle exec rake rubocop` both pass.
## Breaking Changes
Yes. Clients that detect tool argument validation errors via `error.code == -32602`
will need to switch to inspecting `result.isError == true` and reading `result.content[].text`.
Note that the Ruby SDK's previous behavior was a defensible reading of the 2024-11-05 /
2025-03-26 / 2025-06-18 spec wording. The 2025-11-25 disambiguation is what makes
the previous behavior non-conforming; the TypeScript and Python SDKs already shipped
the new behavior.
## Motivation and Context
The MCP Streamable HTTP specification allows servers to return POST responses as either
`text/event-stream` (SSE) or `application/json`:
> If the input is a JSON-RPC request, the server MUST either return `Content-Type: text/event-stream`,
> to initiate an SSE stream, or `Content-Type: application/json`, to return one JSON object.
See: https://modelcontextprotocol.io/specification/2025-11-25/basic/transports#sending-messages-to-the-server
The TypeScript and Python SDKs support a configurable JSON response mode
via `enableJsonResponse` / `is_json_response_enabled`.
JSON response mode is suitable for simple tool servers that do not need server-initiated requests.
It avoids SSE framing overhead and returns a single JSON object for the POST response.
## Behavior
- POST responses use `Content-Type: application/json` and return a single JSON object.
- The POST `Accept` header requirement is relaxed to `application/json` only
(matching the Python SDK's lenient behavior).
- Request-scoped notifications (`progress`, `log`) cannot ride along with the single-object response
and are silently dropped.
- Session-scoped standalone notifications (`resources/updated`, `elicitation/complete`)
and broadcast notifications (`tools/list_changed`, etc.) continue to flow to clients connected
to the GET SSE stream.
- All server-to-client requests (`sampling/createMessage`, `roots/list`, `elicitation/create`)
raise an error in JSON response mode.
- Combines with `stateless: true` for simple single-response servers without session tracking.
## How Has This Been Tested?
Added tests for JSON response mode:
- POST request returns `application/json` response
- Accept header validation requires only `application/json`
- Returns 406 when Accept header is missing
- Accepts wildcard `*/*` in Accept header
- Request-scoped notifications (progress, log) during tool execution are silently dropped
- Request-scoped notifications do not leak to GET SSE even when connected
- Session-scoped standalone notifications are delivered via GET SSE
- Broadcast notifications are delivered via GET SSE
- `send_request` raises for `sampling/createMessage`, `roots/list`, `elicitation/create`
- Combined with `stateless: true`: POST returns JSON without a session ID, GET returns 405
## Breaking Changes
None. JSON response mode is opt-in via `enable_json_response: true`.
The default behavior (SSE responses) is unchanged.
Per MCP spec, clients that no longer need a session SHOULD send an HTTP
DELETE to the MCP endpoint with the Mcp-Session-Id header to explicitly
terminate it. Servers MAY respond with 405 Method Not Allowed when they
don't support client-initiated termination.
`MCP::Client::HTTP#close` sends the DELETE with session headers, clears
local session state regardless of outcome, and is a no-op when no
session has been established.
https://modelcontextprotocol.io/specification/2025-11-25/basic/transports#session-management
Per the Streamable HTTP spec, if the server returns an Mcp-Session-Id
header during `initialize`, the client MUST include it on subsequent
requests. Capture the session ID and protocol version from the
`initialize` response and attach them automatically on subsequent
POSTs.
Per the Protocol Version Header section of the spec, the client MUST
also include `MCP-Protocol-Version` on all subsequent requests so the
server can respond based on the negotiated protocol version.
Map 404 responses to a new `SessionExpiredError` (a subclass of
`RequestHandlerError` for backward compatibility) and clear local
session state so callers can start a fresh session with a new
`initialize` request, as required by the spec.
- https://modelcontextprotocol.io/specification/2025-11-25/basic/transports#session-management
- https://modelcontextprotocol.io/specification/2025-11-25/basic/transports#protocol-version-header
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Per the Streamable HTTP spec, a server returns 202 Accepted with no
body as the ACK for a JSON-RPC notification or response. The client
previously errored on 202 because it fell through Content-Type
dispatch. Short-circuit to return nil before Content-Type handling so
fire-and-forget messages (e.g. notifications/initialized) no longer
raise.
https://modelcontextprotocol.io/specification/2025-11-25/basic/transports#sending-messages-to-the-server
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
The Streamable HTTP spec allows servers to respond with either
`application/json` or `text/event-stream`. The client previously
rejected the latter. Add SSE parsing via the optional
`event_stream_parser` gem (users add it to their Gemfile when their
server uses SSE), dispatch on the response Content-Type, and scan the
event stream for the first JSON-RPC response message.
Document the new optional dependency in both the README's HTTP
Transport Layer section and docs/building-clients.md.
No other Streamable HTTP features (202 handling, session IDs,
`connect`, DELETE termination) are included here; those will land in
follow-up PRs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
## Motivation and Context
The MCP specification defines the `ping` utility for verifying that the peer of
a connection is still responsive. The Ruby SDK server side already replies to
incoming `ping` requests with an empty result, but `MCP::Client` had no public API
to send a `ping` request. Users had to build the JSON-RPC payload themselves and
call the transport directly.
This adds a client-side counterpart to the existing server handler and aligns
the Ruby SDK in spirit with the Python and TypeScript SDKs, which expose
`ClientSession.send_ping` and `Client.ping` respectively. Those SDKs validate
the response envelope via type schemas (`EmptyResult` / `EmptyResultSchema`) and raise
their validation library's generic exception (Pydantic's `ValidationError` / Zod's `ZodError`).
The Ruby client applies a Hash type check on `result`
(matching Python's behavior of requiring a dict while allowing arbitrary contents)
and raises a new `MCP::Client::ValidationError` for malformed responses,
keeping `MCP::Client::ServerError` reserved for JSON-RPC error responses.
## How Has This Been Tested?
Client tests cover:
- request structure (method is `ping`, no `params`)
- empty result on success
- `ServerError` on JSON-RPC error response
- `ValidationError` on a response missing `result`
- `ValidationError` on a `result` of the wrong type (e.g., String)
- propagation of transport-level errors raised by `transport.send_request`
The existing server-side `ping` handler tests continue to pass unchanged.
## Breaking Changes
None. `MCP::Client#ping` and `MCP::Client::ValidationError` are purely additive.
The server-side `ping` handler behavior is unchanged.
## Motivation and Context
The MCP specification defines `resources/subscribe`, `resources/unsubscribe`,
and `notifications/resources/updated` for clients to monitor resource changes:
https://modelcontextprotocol.io/specification/2025-03-26/server/resources#subscriptions
The Ruby SDK had stub (no-op) handlers but provided no way for server developers to
customize subscription behavior or send update notifications.
Following the Python SDK approach, the SDK does not track subscription state internally.
Server developers register handler blocks and manage their own subscription state,
allowing flexibility for different subscription semantics
(per-session tracking, persistence, debouncing, etc.).
Three methods are added:
- `Server#resources_subscribe_handler`: registers a handler for
`resources/subscribe` requests
- `Server#resources_unsubscribe_handler`: registers a handler for
`resources/unsubscribe` requests
- `ServerSession#notify_resources_updated`: sends a
`notifications/resources/updated` notification to the subscribing client
`ServerContext#notify_resources_updated` is also added so that tool handlers
can send the notification scoped to the originating session.
## How Has This Been Tested?
All tests pass (`rake test`), RuboCop is clean. New tests cover custom handler registration
for `resources/subscribe` and `resources/unsubscribe`, session-scoped `notify_resources_updated` notifications,
error handling, and `ServerContext` delegation.
## Breaking Changes
None.
## Motivation and Context
The MCP specification defines cursor-based pagination for list operations that
may return large result sets:
https://modelcontextprotocol.io/specification/2025-11-25/server/utilities/pagination
Pagination allows servers to yield results in smaller chunks rather than all at once,
which is especially important when connecting to external services over the internet.
The Ruby SDK previously returned complete arrays for all list endpoints
(`tools/list`, `resources/list`, `prompts/list`, `resources/templates/list`)
without pagination support. This adds cursor-based pagination.
### Server-side
A new `MCP::Server::Pagination` module is introduced (mixed into `MCP::Server`)
that provides the `paginate` helper for slicing a collection by cursor and
a `cursor_from` helper that extracts the cursor from the request params
while rejecting non-Hash inputs with `-32602 Invalid params` per the specification.
`MCP::Server.new` accepts a new `page_size:` keyword argument.
When `nil` (the default), all items are returned in a single response,
preserving the existing behavior. When set to a positive integer,
list responses include a `nextCursor` field if more pages are available.
`Server#page_size=` is a validating setter that rejects anything other than
`nil` or a positive `Integer`, raising `ArgumentError` on invalid inputs.
The constructor routes through the setter, so both `Server.new(page_size: 0)`
and `server.page_size = -1` raise.
Cursors are string tokens carrying a zero-based offset, treated as opaque by
clients. Cursor inputs are validated to be strings per the MCP spec;
invalid cursors (non-string, non-numeric, negative, or out-of-range) raise
`RequestHandlerError` with error code `-32602 (Invalid params)` per the spec.
### Client-side: two complementary APIs
The SDK exposes two API shapes for listing, each serving a different use case:
1. **Single-page with cursor** (`client.list_tools(cursor:)`,
`list_resources`, `list_resource_templates`, `list_prompts`): each call issues
one JSON-RPC request and returns a result object (`MCP::Client::ListToolsResult` etc.)
carrying the page items and an optional `next_cursor`.
These methods match the single-page-with-cursor convention used by the Python SDK
(`session.list_tools(params=PaginatedRequestParams(cursor=...))`)
and the TypeScript SDK (`client.listTools({ cursor })`). The method name and
the `cursor` parameter name are identical across the three SDKs,
so pagination code translates directly between languages.
2. **Whole-collection** (`client.tools`, `client.resources`, `client.resource_templates`,
`client.prompts`): auto-iterates through all pages and returns a plain array of items,
guaranteeing the full collection regardless of the server's `page_size` setting.
The auto-pagination loop tracks previously seen cursors in a set and exits if the server
revisits any of them, guarding against both immediate repeats and multi-cursor cycles
(e.g. `A -> B -> A`). This mirrors Rust SDK's `list_all_*` convenience methods,
though the Ruby names are preserved from the pre-pagination 0.13.0 API for backward compatibility.
Future rename to `list_all_*` is left as a TODO in the source.
Result classes are `Struct`s named to mirror Python SDK's `ListToolsResult` /
`ListPromptsResult` / etc. to align naming with other SDKs. Each struct exposes
its page items (e.g. `result.tools`), an optional `next_cursor` for continuation,
and an optional `meta` field mirroring the MCP `Result` type's `_meta` response field
so servers that decorate list responses do not lose metadata through the client.
### Ruby-specific ergonomics
`Server.new(page_size:)` and the `Pagination` module are Ruby-specific.
The Python and TypeScript SDKs do not expose a built-in `page_size` helper;
developers there re-implement cursor slicing inside each handler.
In Ruby, setting `page_size:` on the server is enough for the SDK to handle
the slicing across the four built-in list endpoints.
### README
A Pagination section documents both the server-side `page_size:` option and
the client-side iteration patterns, including an explicit note that each `list_*` call
is a single JSON-RPC round trip whose response size depends on the server's `page_size`,
and that `client.tools` / `.resources` / `.resource_templates` / `.prompts` return
the complete collection when needed.
## How Has This Been Tested?
- Added tests for the `Pagination` module (`test/mcp/server/pagination_test.rb`),
server-side pagination (`test/mcp/server_test.rb`), and client-side pagination
(`test/mcp/client_test.rb`).
- Added and existing tests pass. `rake rubocop` is clean and `rake conformance` passes.
## Breaking Changes
None. This is a new feature addition. Existing code continues to work unchanged:
`page_size` defaults to `nil` on the server (returns all items, no `nextCursor`),
and the client's existing `tools` / `resources` / `resource_templates` / `prompts` methods
continue to return complete arrays by transparently iterating through pages.
## Motivation and Context
MCP spec (2025-11-25) defines Roots as a mechanism for clients to expose filesystem boundaries
(directories and files) to servers:
https://modelcontextprotocol.io/specification/2025-11-25/client/roots
This enables servers to understand which parts of the filesystem they can operate on.
This adds support for the two roots protocol interactions:
- `roots/list` -- server-to-client request to retrieve the client's filesystem roots
- `notifications/roots/list_changed` -- client-to-server notification when roots change
`roots/list` is a one-to-one request between a server and a specific client,
so `list_roots` is exposed only at the session level
(`ServerSession#list_roots`), matching the Python SDK approach and aligning with PR #311 for sampling.
`Server#on_roots_list_changed` registers a callback for the client notification,
which is server-wide and does not require session scoping.
Also fixes `notifications/roots/list_changed` capability checking: as a client-originated notification,
it should not require server-side capability declaration.
## How Has This Been Tested?
New test file `test/mcp/server_roots_test.rb` with 8 test cases covering session-scoped `list_roots`,
capability validation and fallback, `on_roots_list_changed` callback registration, and client capability storage.
Updated `test/mcp/methods_test.rb` to reflect the corrected capability checks. All tests pass (`rake test`),
RuboCop is clean.
## Breaking Changes
None.
