## Summary
Unlike applications, libraries provide value by remaining usable for a broad range of users,
even when that means supporting older Ruby versions beyond Ruby's own EOL timeline.
I maintain RuboCop, a Ruby linter. Because linters need to work across the ecosystem,
they often need to keep compatibility with older Ruby versions to some extent.
The trade-off is that the MCP Ruby SDK must remain compatible with Ruby 2.7.
However, given the ecosystem impact, supporting Ruby 2.7 is still worthwhile.
For example, bundled gems such as `csv` (Ruby >= 2.5), `bigdecimal` (Ruby >= 2.5), `json` (Ruby >= 2.7),
and `language_server-protocol` (Ruby >= 2.5) tend to keep compatibility with older Ruby versions.
Unlike dropping support, which imposes restrictions on users,
this change broadens compatibility and does not introduce breaking changes.
## Development Note
`rubocop-shopify` (2.18) supports Ruby 3.1+, and this PR does not change that.
Since RuboCop can configure the runtime Ruby version and the target Ruby version for analysis independently,
CI continues to run RuboCop on Ruby 4.0, while analyzing code with `TargetRubyVersion: 2.7`.
When setting `TargetRubyVersion: 2.7`, several RuboCop offenses were resolved.
Additionally, Sorbet-related libraries support Ruby 3.0+. Since these are not dependencies of the MCP Ruby SDK itself,
they are versioned and tested in the development Gemfile.
When starting an MCP server in Claude Code with `protocol_version` set to `DRAFT-2025-v3`,
it fails with the following error:
```console
2025-12-04T02:58:01.548Z [DEBUG] MCP server "example": Connection failed after 2093ms: Server's protocol version is not supported: DRAFT-2025-v3
2025-12-04T02:58:01.548Z [ERROR] MCP server "example" Connection failed: Server's protocol version is not supported: DRAFT-2025-v3
```
This PR changes the default behavior so that if `protocol_version` is not specified,
it uses the latest stable protocol version instead of the draft version.
This PR also updates the README to note that the latest stable protocol version includes
new features from the draft version.
For example, the `title` introduced in #109 is not supported in the latest stable protocol version "2025-06-18":
https://modelcontextprotocol.io/specification/2025-06-18
It is supported in the Draft of the next version:
https://modelcontextprotocol.io/specification/draft
In other words, the fact that the Ruby SDK treats "2025-06-18" as the default protocol version while `title` is
only supported in the Draft results in an inconsistency.
Because of this, a new version `"Draft"` has been added to the list of supported versions.
Its value follows the schema below and is defined as `DRAFT-2025-v3`:
14ec41c/schema/draft/schema.ts (L15)
It was also considered to continue using the latest stable version "2025-06-18" as the Ruby SDK default instead of the Draft.
However, in that case, users would need to explicitly specify `MCP::Server.new(protocol_version: 'DRAFT-2025-v3')`,
which adds extra burden. In this PR, Draft is made the default in order to provide the following benefits:
- Users are likely to prefer using the Draft version over the latest stable version
- No need to specify the `protocol_version` option when initializing `MCP::Server`
- Users generally do not need to know the internal development value `DRAFT-2025-v3`
The primary case for specifying `protocol_version` explicitly is when strict adherence to a particular version is required.
However, it seems more practical to prioritize use cases where backward-compatible features, including those from the Draft,
are desirable. This is the rationale behind making the Draft version the default.
In addition, making the Draft version the default protocol version preserves backward compatibility for `MCP::Server`.
NOTE: `DRAFT-2025-v3` is a development code, so its value cannot be set externally.
It is applied either when `protocol_version` is omitted or when `nil` is set explicitly,
such as with `MCP::Configuration.new(protocol_version: nil)`.
This prevents users from creating implementations that depend on development codes like `DRAFT-2025-v3`.
- Create failing tests for `stateless` mode
- Implement `stateless` mode by turning of SSE in Streamable HTTP,
making the interaction a standard HTTP Req/Resp
There are some unused block variables. This change removes block parameters
that consist solely of unused block parameters.
Where `Hash#values` suffices instead of ignoring unused variables,
replace such code with `Hash#values`.
Update send_notification method to properly construct JSON-RPC notification objects with jsonrpc version and method fields.
This ensures notifications conform to the JSON-RPC 2.0 specification when sent over HTTP transport.
https://www.jsonrpc.org/specification#notification
Another goal is to standardise the `send_notification` interface.
Before the revision, it was sufficient to pass the method and parameters in the case of stdio.
However, in the case of Streamable, a hash based on the JSON-RPC specification must be passed.
Currently, MCP has three versions: 2024-11-05, 2025-03-26, and 2025-06-18.
- https://modelcontextprotocol.io/specification/2024-11-05/basic/transports (stdio and HTTP with SSE)
- https://modelcontextprotocol.io/specification/2025-03-26/basic/transports (stdio and Streamable HTTP)
- https://modelcontextprotocol.io/specification/2025-06-18/basic/transports (stdio and Streamable HTTP)
The newer specification supports stdio and Streamable HTTP as transport mechanisms.
Only the oldest version, 2024-11-05, supports stdin and HTTP with SSE,
but that version is now considered legacy.
Given the current behavior of the Ruby SDK, it likely makes more sense to set
the default protocol version to the latest one, 2025-06-18, rather than the oldest, 2024-11-05.
Ideally, the implementation should adjust its behavior based on the version,
but this PR is limited to updating the default protocol version only.
The reason for the change is that a NameError occurs when a POST request is made while the stream is closed because ModelContextProtocol is undefined.
I have also added test cases to check the behaviour when IOError and Errno::EPIPE occurs.
Refactor capabilities handling into MCP::Server::Capabilities to improve
code organization and separation of concerns. This provides a cleaner API
for configuring server capabilities including prompts, resources, tools,
completions, logging, and experimental features.
🤖 Generated with [Claude Code](https://claude.ai/code)
Co-Authored-By: Claude <noreply@anthropic.com>
Follow-up to #27.
This PR fixes the following build error:
```console
$ bundle exec rake
/Users/koic/.rbenv/versions/3.5-dev/lib/ruby/3.5.0+1/bundled_gems.rb:59:in 'Kernel.require': cannot load such file -- mcp/transports/stdio (LoadError)
Did you mean? mcp/transports/stdio_transport_test
from /Users/koic/.rbenv/versions/3.5-dev/lib/ruby/3.5.0+1/bundled_gems.rb:59:in 'block (2 levels) in Kernel#replace_require'
from /Users/koic/src/github.com/modelcontextprotocol/ruby-sdk/test/mcp/transports/stdio_transport_test.rb:4:in '<top (required)>'
from /Users/koic/.rbenv/versions/3.5-dev/lib/ruby/3.5.0+1/bundled_gems.rb:59:in 'Kernel.require'
from /Users/koic/.rbenv/versions/3.5-dev/lib/ruby/3.5.0+1/bundled_gems.rb:59:in 'block (2 levels) in Kernel#replace_require'
from /Users/koic/.rbenv/versions/3.5-dev/lib/ruby/gems/3.5.0+1/gems/rake-13.3.0/lib/rake/rake_test_loader.rb:21:in 'block in <main>'
from /Users/koic/.rbenv/versions/3.5-dev/lib/ruby/gems/3.5.0+1/gems/rake-13.3.0/lib/rake/rake_test_loader.rb:6:in 'Array#select'
from /Users/koic/.rbenv/versions/3.5-dev/lib/ruby/gems/3.5.0+1/gems/rake-13.3.0/lib/rake/rake_test_loader.rb:6:in '<main>'
rake aborted!
Command failed with status (1)
/Users/koic/.rbenv/versions/3.5-dev/bin/bundle:25:in 'Kernel#load'
/Users/koic/.rbenv/versions/3.5-dev/bin/bundle:25:in '<main>'
Tasks: TOP => default => test
(See full trace by running task with --trace)
```
https://github.com/modelcontextprotocol/ruby-sdk/actions/runs/15428236624/job/43420346011
The following is stated in #27.
> Breaking Changes
> `MCP::Transports::StdioTransport` is now `MCP::Server::Transports::StdioTransport`
What is shown here is the new name `MCP::Server::Transports::StdioTransport`, not `MCP::Server::Transports::Stdio`.
Therefore, the file path has been updated from `lib/mcp/server/transports/stdio.rb` to `lib/mcp/server/transports/stdio_transport.rb` to
match the module name. If `MCP::Server::Transports::Stdio` is preferred instead, please let me know and I will open a separate PR.
