# frozen_string_literal: true

require "securerandom"
require_relative "../../json_rpc_handler"
require_relative "../configuration"
require_relative "../methods"
require_relative "../protocol_deprecations"
require_relative "../version"
require_relative "mcp_param_headers"
require_relative "modern_envelope"

module MCP
  class Client
    class HTTP
      ACCEPT_HEADER = "application/json, text/event-stream"
      SSE_ACCEPT_HEADER = "text/event-stream"
      SESSION_ID_HEADER = "Mcp-Session-Id"
      PROTOCOL_VERSION_HEADER = "MCP-Protocol-Version"
      METHOD_HEADER = "Mcp-Method"
      NAME_HEADER = "Mcp-Name"
      LAST_EVENT_ID_HEADER = "Last-Event-ID"

      # SEP-1699 reconnection tuning: the SSE `retry:` field from the server takes precedence;
      # this default applies when the server sent none. Both values match the Python SDK
      # (`DEFAULT_RECONNECTION_DELAY_MS`, `MAX_RECONNECTION_ATTEMPTS`); the TypeScript SDK uses
      # an exponential backoff that the `retry:` field likewise overrides.
      DEFAULT_RECONNECTION_DELAY_MS = 1000
      MAX_RECONNECTION_ATTEMPTS = 2

      # Floor on the effective reconnection delay. `listen_for_server_requests` treats a graceful close as success
      # and resets `consecutive_failures`, so `retry: 0` never reaches the attempt cap and reconnects in a tight loop.
      # Waiting longer than the server asked for is explicitly allowed: the `retry` field the spec points at is
      # the one defined by WHATWG HTML, whose reconnection algorithm reads "Wait a delay equal to the reconnection time
      # of the event source. Optionally, wait some more." Waiting *less* is what the spec's MUST rules out,
      # and nothing here ever does that.
      #
      # https://html.spec.whatwg.org/multipage/server-sent-events.html#reconnection-time
      MIN_RECONNECTION_DELAY_MS = 100

      # Budget in seconds for `await_response_after_disconnect`: it gates every wait between reconnection attempts,
      # and whatever is left of it becomes the read timeout of each resumed stream. That method runs on the calling thread,
      # so without a deadline a server answering with a large `retry:` parks a thread of the embedding application for
      # as long as it likes; `MAX_RECONNECTION_ATTEMPTS` caps how many times the client reconnects,
      # not how long it waits for each. A delay that would run past the deadline is not shortened - the client stops
      # reconnecting instead, the same kind of decision the attempt cap already makes, so the server's `retry:` is
      # always honored in full or not acted on at all.
      #
      # Matches `SSE_LISTENER_READ_TIMEOUT`, this client's other "how long to wait on a quiet SSE stream" value.
      # `listen_for_server_requests` has no such deadline: it runs on a thread this client owns and is meant
      # to poll indefinitely, so a long `retry:` there idles the SDK's own listener rather than the application.
      MAX_RECONNECTION_WAIT = 300

      # How long the standalone GET listening stream may stay idle before the read times out
      # and the connection is counted as a failure and retried. Matches the Python SDK's
      # `sse_read_timeout` default of 5 minutes; without this, the adapter's default read timeout
      # (60 seconds for Net::HTTP) would recycle quiet streams too eagerly.
      SSE_LISTENER_READ_TIMEOUT = 300

      # Upper bound in bytes on a single JSON-RPC message from the server - an SSE event or
      # a JSON response body - buffered in memory while reading a response. Without a bound,
      # a server that never terminates an SSE event (or never ends a JSON body) grows
      # the buffer indefinitely. Matches the 4 MiB default of `MCP::Client::Stdio::MAX_LINE_BYTES`
      # and the server transports' request cap.
      MAX_MESSAGE_BYTES = 4 * 1024 * 1024

      # Upper bound on the tools whose `x-mcp-header` declarations are retained for
      # `Mcp-Param-*` mirroring (SEP-2243). Past the cap, newly listed tools mirror nothing
      # (the spec's guidance to send without custom headers), so a server rotating tool names across
      # `tools/list` responses cannot grow the registry without bound.
      MAX_MCP_PARAM_TOOLS = 1000

      # Raised when an `oauth:` provider is paired with an MCP URL that is neither HTTPS nor
      # a loopback `http://` URL, since a bearer token sent over plain HTTP to a remote host
      # is trivially observed and stolen.
      class InsecureURLError < ArgumentError; end

      # Faraday request middleware that compares the outgoing request URL
      # against the URL snapshotted at `MCP::Client::HTTP#initialize` time.
      # Registered after the user's customizer so it sees `env.url` *after*
      # any custom middleware has had a chance to rewrite it - closing
      # the `Faraday env.url = URI("https://attacker...")` bypass that a plain
      # `client.url_prefix` check would miss. The comparison includes
      # the query string, so a middleware that rewrites `env.url.query` to
      # a different tenant (e.g. `?tenant=evil`) is rejected as well; otherwise
      # the audience-binding check on the OAuth side could be bypassed at
      # the send step.
      class OAuthURLGuard
        def initialize(app, expected_url:)
          @app = app
          @expected_url = expected_url
        end

        def call(env)
          effective = MCP::Client::OAuth::Discovery.canonicalize_url(env.url.to_s)
          unless effective == @expected_url
            # Surface the *canonicalized* form (no userinfo, no fragment) so
            # credentials like `user:pass@` cannot leak into logs, stack
            # traces, or exception reporters.
            raise InsecureURLError,
              "Effective request URL #{effective.inspect} does not match the URL " \
                "validated at initialize time (#{@expected_url.inspect}); refusing to send a bearer token."
          end
          @app.call(env)
        end
      end

      # Internal control-flow signal raised inside the streaming callback to stop reading
      # an SSE stream once the awaited JSON-RPC response has arrived; servers may hold
      # a stream open indefinitely (notably the standalone GET stream), so EOF cannot be relied on.
      class StreamAbort < StandardError; end
      private_constant :StreamAbort

      # Raised inside the streaming callback when the server sends more bytes than
      # `max_message_bytes` without completing a message. Translated into
      # a `RequestHandlerError` (or a listener stop) where the request context is known.
      class MessageTooLargeError < StandardError; end
      private_constant :MessageTooLargeError

      # Per-exchange SSE state shared between the initial POST stream and any SEP-1699 reconnection GET streams:
      # the incrementally parsed JSON-RPC response, the last received SSE event id (for `Last-Event-ID`),
      # and the server's `retry:` reconnection delay. Non-SSE bodies accumulate in `buffer` for the JSON path.
      class SSEStream
        attr_reader :buffer, :response, :last_event_id, :retry_ms
        attr_accessor :abortable

        def initialize(abortable:, max_message_bytes: MAX_MESSAGE_BYTES, on_request: nil)
          @abortable = abortable
          @max_message_bytes = max_message_bytes
          @on_request = on_request
          @buffer = +""
          @parser = nil
          @response = nil
          @last_event_id = nil
          @retry_ms = nil
        end

        # Whether the server sent a SEP-1699 priming event (any event carrying an id),
        # which marks the stream as resumable after a graceful close.
        def primed?
          !@last_event_id.nil?
        end

        # Faraday `on_data` streaming callback. SSE chunks are parsed incrementally;
        # anything else (JSON bodies) accumulates in `buffer`. Both paths are bounded
        # by `max_message_bytes`, checked after the awaited response had its chance to
        # abort the stream so an over-limit tail cannot mask a response that already arrived.
        def on_data
          proc do |chunk, _received_bytes, env|
            if event_stream?(env)
              feed(chunk)
              raise StreamAbort if @abortable && @response

              if parser_buffered_bytes > @max_message_bytes
                raise MessageTooLargeError, "Server SSE event exceeds #{@max_message_bytes} bytes without completing"
              end
            else
              @buffer << chunk

              if @buffer.bytesize > @max_message_bytes
                raise MessageTooLargeError, "Server response body exceeds #{@max_message_bytes} bytes"
              end
            end
          end
        end

        # A fresh parser for a new HTTP connection (reconnection GET),
        # so a partial line from the previous stream cannot corrupt the next one.
        def reset_parser!
          @parser = nil
        end

        # Parses an SSE body that was delivered outside the streaming callback:
        # Faraday versions that do not pass `env` to `on_data` leave SSE chunks in `buffer`
        # (consumed here so they are not parsed twice), and adapters without `on_data` support
        # yield the whole body only via `fallback_body` (the Faraday `response.body`).
        def ingest_pending!(fallback_body)
          text = @buffer.empty? ? fallback_body : @buffer.slice!(0..-1)
          feed(text) if text.is_a?(String) && !text.empty?
        end

        private

        def event_stream?(env)
          headers = env&.response_headers
          content_type = headers && (headers["content-type"] || headers["Content-Type"])
          !!content_type&.include?("text/event-stream")
        end

        def feed(chunk)
          parser.feed(chunk) do |_type, data, id, reconnection_time|
            @last_event_id = id if id && !id.empty?
            @retry_ms = reconnection_time if reconnection_time
            next if data.nil? || data.empty?

            begin
              parsed = JSON.parse(data)
            rescue JSON::ParserError
              next
            end

            next unless parsed.is_a?(Hash)

            if parsed.key?("result") || parsed.key?("error")
              @response ||= parsed
            elsif parsed["method"] && parsed.key?("id")
              # A server-to-client request (e.g. `elicitation/create`) delivered
              # on the stream while the original request is still pending.
              @on_request&.call(parsed)
            end
          end
        end

        # Bytes the parser has buffered for a not-yet-dispatched event: the partial line
        # and the accumulated `data:` field values (plus the small event type and last event id buffers).
        # External byte counting cannot tell consumed-and-discarded bytes (comments, field names, delimiters)
        # from consumed-and-retained ones, so the parser's own String buffers are measured instead;
        # summing every String instance variable keeps the measurement valid if the parser renames or adds buffers.
        # A parser rewrite that buffered elsewhere would make this return 0 and quietly lift the cap -
        # the regression tests feeding an over-limit event guard against that.
        def parser_buffered_bytes
          parser.instance_variables.sum do |name|
            value = parser.instance_variable_get(name)
            value.is_a?(String) ? value.bytesize : 0
          end
        end

        def parser
          @parser ||= begin
            require "event_stream_parser"
            EventStreamParser::Parser.new
          rescue LoadError
            raise LoadError, "The 'event_stream_parser' gem is required to parse SSE responses. " \
              "Add it to your Gemfile: gem 'event_stream_parser', '>= 1.0'. " \
              "See https://rubygems.org/gems/event_stream_parser for more details."
          end
        end
      end
      private_constant :SSEStream

      attr_reader :url, :session_id, :protocol_version, :server_info, :oauth

      def initialize(
        url:,
        headers: {},
        oauth: nil,
        max_message_bytes: MAX_MESSAGE_BYTES,
        max_reconnection_wait: MAX_RECONNECTION_WAIT,
        &block
      )
        # `nil` or a non-positive value would make the buffering unbounded and silently
        # disable the protection, so reject it up front.
        unless max_message_bytes.is_a?(Integer) && max_message_bytes > 0
          raise ArgumentError, "max_message_bytes must be a positive Integer"
        end

        unless max_reconnection_wait.is_a?(Numeric) && max_reconnection_wait > 0
          raise ArgumentError, "max_reconnection_wait must be a positive number"
        end

        if oauth && !MCP::Client::OAuth::Discovery.secure_url?(url)
          # Mask credentials (userinfo) and query parameters before quoting the URL in the error message
          # so they cannot leak into logs.
          safe_url = MCP::Client::OAuth::Discovery.canonicalize_origin_and_path(url)
          raise InsecureURLError,
            "MCP URL #{safe_url.inspect} must use https or be a loopback http URL when an oauth provider is set; " \
              "sending bearer tokens over plain http to a remote host would leak them on the wire."
        end

        @url = url
        @headers = headers
        @faraday_customizer = block
        @oauth = oauth
        @max_message_bytes = max_message_bytes
        @max_reconnection_wait = max_reconnection_wait
        # Snapshot the canonical URL at construction time. This single value
        # serves two related roles, both of which need to see the query string:
        #
        # - As the RFC 8707 `resource` claim sent on the authorization and
        #   token requests (and as the base for PRM discovery URLs) -
        #   matching the TS / Python SDKs' `resourceUrlFromServerUrl` /
        #   `resource_url_from_server_url` so multi-tenant servers that scope
        #   by `?tenant=...` round-trip correctly.
        # - As the comparison value for the URL guard middleware. Comparing
        #   query strings as well as origin + path is required so a Faraday
        #   middleware that rewrites `env.url.query` to a different tenant
        #   cannot send the bearer token to the wrong audience while
        #   the resource binding on the OAuth side stays correct.
        #
        # Saved only when `oauth:` is set so non-OAuth transports keep their
        # existing behavior.
        @oauth_server_url = oauth ? MCP::Client::OAuth::Discovery.canonicalize_url(url) : nil
        @session_id = nil
        @protocol_version = nil
        @server_info = nil
        @connected = false
        @server_request_handlers = {}
        @listener_thread = nil
        @modern_client_info = nil
        @modern_capabilities = nil
        @mcp_param_declarations = {}
      end

      # Registers a handler for a server-to-client request (e.g. `elicitation/create`) delivered on an SSE stream.
      # The handler receives the request's `params` (a Hash with string keys, possibly empty) and its return value is
      # sent back to the server as the JSON-RPC `result`.
      # The handler may raise `MCP::Client::ServerRequestError` to answer with a specific JSON-RPC error code.
      # Requests for methods without a registered handler are answered with a JSON-RPC "method not found" (-32601) error.
      # Registering a handler opens a standalone GET SSE listening stream (once connected), since servers send requests
      # that are not tied to a client request on that stream - matching the TypeScript and Python SDK clients,
      # which start listening after the `initialize` handshake.
      # https://modelcontextprotocol.io/specification/2025-11-25/basic/transports#listening-for-messages-from-the-server
      def on_server_request(method, &handler)
        raise ArgumentError, "A handler block is required" unless handler

        @server_request_handlers[method.to_s] = handler
        start_listening if connected?
      end

      # Performs the MCP `initialize` handshake: sends an `initialize` request
      # followed by the required `notifications/initialized` notification.
      # The server's `InitializeResult` (protocol version, capabilities, server
      # info, instructions) is cached on the transport and returned.
      #
      # Idempotent: a second call returns the cached `InitializeResult` without
      # contacting the server. After `close`, state is cleared and `connect`
      # will handshake again.
      #
      # @param client_info [Hash, nil] `{ name:, version: }` identifying the client.
      #   Defaults to `{ name: "mcp-ruby-client", version: MCP::VERSION }`.
      # @param protocol_version [String, nil] Protocol version to offer on the legacy handshake.
      #   Defaults to `MCP::Configuration::LATEST_HANDSHAKE_PROTOCOL_VERSION`; a modern version
      #   raises `ArgumentError` here (modern versions are selected via `mode: :modern`/`:auto`).
      # @param capabilities [Hash] Capabilities advertised by the client. Defaults to `{}`.
      # @return [Hash] The server's `InitializeResult`.
      # @raise [RequestHandlerError] If the server responds with a JSON-RPC error
      #   or a malformed result.
      # @param mode [Symbol] Lifecycle selection (SEP-2575): `:legacy` (default) performs
      #   the handshake below, `:modern` skips it and probes `server/discover`,
      #   and `:auto` probes `server/discover` first, falling back to the legacy handshake
      #   when the server does not serve a mutually supported modern version.
      # https://modelcontextprotocol.io/specification/2025-11-25/basic/lifecycle#initialization
      def connect(client_info: nil, protocol_version: nil, capabilities: {}, mode: :legacy)
        return @server_info if connected?

        # Per the SEP-2575 era model, a modern version cannot ride the legacy `initialize` handshake.
        MCP::Configuration.reject_modern_handshake_version!(protocol_version) if mode == :legacy

        client_info ||= { name: "mcp-ruby-client", version: MCP::VERSION }

        case mode
        when :legacy
          connect_legacy(client_info: client_info, protocol_version: protocol_version, capabilities: capabilities)
        when :modern
          connect_modern(client_info: client_info, protocol_version: protocol_version, capabilities: capabilities)
        when :auto
          connect_auto(client_info: client_info, protocol_version: protocol_version, capabilities: capabilities)
        else
          raise ArgumentError, "mode must be :legacy, :modern, or :auto"
        end
      end

      # Whether the transport operates in the stateless modern lifecycle (SEP-2575):
      # no handshake was performed and every request carries the `_meta` envelope.
      def modern?
        !@modern_client_info.nil?
      end

      # Returns true once `connect` has completed the full handshake
      # (`initialize` response received and `notifications/initialized` sent),
      # or once the modern lifecycle was adopted via `server/discover`.
      # Returns false before the first handshake and after `close`.
      def connected?
        @connected
      end

      # Sends a JSON-RPC request and returns the parsed response body.
      # After a successful `initialize` handshake, the session ID and protocol version returned by
      # the server are captured and automatically included on subsequent requests.
      #
      # If a block is given, it is invoked just before Faraday's `post` is called.
      # Faraday's synchronous `post` does not expose a post-write / pre-response hook,
      # so this is the latest send-boundary signal the adapter exposes; the actual TCP write happens
      # inside `post`. `MCP::Client#dispatch_with_cancellation` uses this yield to release
      # the cancel-dispatch thread, which then issues a separate `notifications/cancelled` POST
      # that may overlap with the original request on the network. The spec covers this:
      # the sender has issued the request and still believes it in-progress, and receivers MAY ignore
      # a cancellation referring to an unknown request id when the cancel POST happens to arrive first.
      # https://modelcontextprotocol.io/specification/2025-11-25/basic/utilities/cancellation
      def send_request(request:)
        # Modern requests (never notifications, whose `_meta` has no envelope) carry
        # the SEP-2575 triple; the `MCP-Protocol-Version` header from `session_headers`
        # matches it by construction.
        if modern? && (request[:id] || request["id"])
          request = ModernEnvelope.stamp(
            request,
            protocol_version: @protocol_version,
            client_info: @modern_client_info,
            capabilities: @modern_capabilities,
          )
        end

        method = request[:method] || request["method"]
        params = request[:params] || request["params"]
        oauth_retried = false
        step_up_retried = false

        begin
          # The response is consumed incrementally so that an SSE stream the server holds open
          # (or closes early per SEP-1699) can be handled; `initialize` streams are read to EOF
          # so the response object (and its `Mcp-Session-Id` header) is always available for capture.
          stream = SSEStream.new(
            abortable: method.to_s != MCP::Methods::INITIALIZE,
            max_message_bytes: @max_message_bytes,
            on_request: ->(message) { dispatch_server_request(message) },
          )

          yield if block_given?

          response = begin
            client.post("", request, session_headers.merge(request_metadata_headers(method, params))) do |req|
              req.options.on_data = stream.on_data
            end
          rescue StreamAbort
            nil
          end

          body = resolve_response_body(stream, response, method, params)

          capture_session_info(method, response, body) if response
          capture_mcp_param_declarations(method, params, body)

          body
        rescue MessageTooLargeError => e
          raise RequestHandlerError.new(
            e.message,
            { method: method, params: params },
            error_type: :internal_error,
          )
        rescue Faraday::BadRequestError => e
          raise RequestHandlerError.new(
            "The #{method} request is invalid",
            { method: method, params: params },
            error_type: :bad_request,
            original_error: e,
          )
        rescue Faraday::UnauthorizedError => e
          # Run the OAuth flow at most once per `send_request` invocation.
          # The `oauth_retried` flag lives outside the `begin` so it survives `retry`,
          # ensuring a server returning 401 indefinitely raises rather than loops.
          if @oauth && !oauth_retried
            oauth_retried = true
            run_oauth_flow!(unauthorized_error: e)
            retry
          end

          raise RequestHandlerError.new(
            "You are unauthorized to make #{method} requests",
            { method: method, params: params },
            error_type: :unauthorized,
            original_error: e,
          )
        rescue Faraday::ForbiddenError => e
          # OAuth 2.0 step-up: a 403 carrying `error="insufficient_scope"` in
          # the Bearer challenge means the existing access token is valid
          # but lacks scopes the server now requires for this operation.
          # Re-run the full authorization flow with the escalated scope from
          # the challenge and retry once. A plain 403 without the challenge is
          # surfaced unchanged.
          if @oauth && !step_up_retried && insufficient_scope_challenge?(e)
            step_up_retried = true
            run_step_up_flow!(forbidden_error: e)

            retry
          end

          raise RequestHandlerError.new(
            "You are forbidden to make #{method} requests",
            { method: method, params: params },
            error_type: :forbidden,
            original_error: e,
          )
        rescue Faraday::ResourceNotFound => e
          # Per spec, 404 is the session-expired signal only when the request
          # actually carried an `Mcp-Session-Id`. A 404 without a session attached
          # (e.g. wrong URL or a stateless server) surfaces as a generic not-found.
          # https://modelcontextprotocol.io/specification/2025-11-25/basic/transports#session-management
          if @session_id
            clear_session
            raise SessionExpiredError.new(
              "The #{method} request is not found",
              { method: method, params: params },
              original_error: e,
            )
          else
            raise RequestHandlerError.new(
              "The #{method} request is not found",
              { method: method, params: params },
              error_type: :not_found,
              original_error: e,
            )
          end
        rescue Faraday::UnprocessableEntityError => e
          raise RequestHandlerError.new(
            "The #{method} request is unprocessable",
            { method: method, params: params },
            error_type: :unprocessable_entity,
            original_error: e,
          )
        rescue Faraday::Error => e
          raise RequestHandlerError.new(
            "Internal error handling #{method} request",
            { method: method, params: params },
            error_type: :internal_error,
            original_error: e,
          )
        end
      end

      # Sends a JSON-RPC notification (no response expected). Used by `Client#cancel` to deliver
      # `notifications/cancelled` for an in-flight request. The server acknowledges with HTTP 202 Accepted
      # per the Streamable HTTP spec.
      def send_notification(notification:)
        method = notification[:method] || notification["method"]

        client.post("", notification, session_headers)
        nil
      rescue Faraday::Error => e
        raise RequestHandlerError.new(
          "Failed to send #{method} notification",
          { method: method },
          error_type: :internal_error,
          original_error: e,
        )
      end

      # Terminates the session by sending an HTTP DELETE to the MCP endpoint
      # with the current `Mcp-Session-Id` header, and clears locally tracked
      # session state afterward. No-op when no session has been established.
      #
      # Per spec, the server MAY respond with HTTP 405 Method Not Allowed when
      # it does not support client-initiated termination, and returns 404 for
      # a session it has already terminated. Both mean the session is gone —
      # the desired end state. Other errors surface to the caller; local
      # session state is cleared either way.
      # https://modelcontextprotocol.io/specification/2025-11-25/basic/transports#session-management
      def close
        unless @session_id
          clear_session
          return
        end

        begin
          client.delete("", nil, session_headers)
        rescue Faraday::ClientError => e
          raise unless [404, 405].include?(e.response&.dig(:status))
        ensure
          clear_session
        end
      end

      private

      attr_reader :headers

      def connect_legacy(client_info:, protocol_version:, capabilities:)
        protocol_version ||= MCP::Configuration::LATEST_HANDSHAKE_PROTOCOL_VERSION

        response = send_request(request: {
          jsonrpc: JsonRpcHandler::Version::V2_0,
          id: SecureRandom.uuid,
          method: MCP::Methods::INITIALIZE,
          params: {
            protocolVersion: protocol_version,
            capabilities: capabilities,
            clientInfo: client_info,
          },
        })

        if response.is_a?(Hash) && response.key?("error")
          clear_session
          error = response["error"]
          raise RequestHandlerError.new(
            "Server initialization failed: #{error["message"]}",
            { method: MCP::Methods::INITIALIZE },
            error_type: :internal_error,
          )
        end

        unless response.is_a?(Hash) && response["result"].is_a?(Hash)
          clear_session
          raise RequestHandlerError.new(
            "Server initialization failed: missing result in response",
            { method: MCP::Methods::INITIALIZE },
            error_type: :internal_error,
          )
        end

        @server_info = response["result"]
        negotiated_protocol_version = @server_info["protocolVersion"]
        # A modern version in an `InitializeResult` is rejected along with unknown ones: the handshake
        # settles on a legacy version by definition, and the TypeScript and Python clients refuse
        # a modern counter-offer the same way.
        unless MCP::Configuration::SUPPORTED_HANDSHAKE_PROTOCOL_VERSIONS.include?(negotiated_protocol_version)
          clear_session
          raise RequestHandlerError.new(
            "Server initialization failed: unsupported protocol version #{negotiated_protocol_version.inspect}",
            { method: MCP::Methods::INITIALIZE },
            error_type: :internal_error,
          )
        end

        begin
          send_request(request: {
            jsonrpc: JsonRpcHandler::Version::V2_0,
            method: MCP::Methods::NOTIFICATIONS_INITIALIZED,
          })
        rescue StandardError
          clear_session
          raise
        end

        @connected = true
        start_listening if @server_request_handlers.any?
        @server_info
      end

      # Enters the modern lifecycle by probing `server/discover` at the requested (or latest) modern version.
      # No `initialize` or `notifications/initialized` is sent; the probe response becomes `server_info`.
      def connect_modern(client_info:, protocol_version:, capabilities:)
        version = protocol_version || MCP::Configuration::LATEST_MODERN_PROTOCOL_VERSION
        unless MCP::Configuration.modern_protocol_version?(version)
          raise ArgumentError, "protocol_version #{version.inspect} is not a supported modern protocol version"
        end

        enter_modern_mode(protocol_version: version, client_info: client_info, capabilities: capabilities)

        begin
          result = probe_discover
        rescue StandardError
          leave_modern_mode
          raise
        end

        supported = result["supportedVersions"]
        unless supported.is_a?(Array) && supported.include?(version)
          leave_modern_mode
          raise RequestHandlerError.new(
            "Server discovery failed: no mutually supported modern protocol version " \
              "(server supports #{supported.inspect})",
            { method: MCP::Methods::SERVER_DISCOVER },
            error_type: :internal_error,
          )
        end

        # SEP-2577 deprecates roots and sampling at 2026-07-28, the revision every modern connection speaks,
        # so the warning lives here now that the handshake cannot land on one.
        MCP::ProtocolDeprecations.warn_for_client_capabilities(capabilities, protocol_version: version, uplevel: 1)

        @server_info = result
        @connected = true
        @server_info
      end

      # Probes `server/discover` and adopts the modern lifecycle when the server serves
      # a mutually supported modern version; otherwise falls back to the legacy handshake.
      # The fallback intentionally covers a successful discovery without a mutual modern
      # version as well: during the 2026-07-28 rollout a server may answer discovery while
      # only serving legacy versions.
      def connect_auto(client_info:, protocol_version:, capabilities:)
        modern_pin = protocol_version if protocol_version && MCP::Configuration.modern_protocol_version?(protocol_version)
        connect_modern(client_info: client_info, protocol_version: modern_pin, capabilities: capabilities)
      rescue RequestHandlerError
        # An explicitly requested modern version is never downgraded by the fallback: the legacy handshake cannot negotiate it,
        # so the probe's failure is the real answer and propagates.
        raise if modern_pin

        connect_legacy(client_info: client_info, protocol_version: protocol_version, capabilities: capabilities)
      end

      def enter_modern_mode(protocol_version:, client_info:, capabilities:)
        @modern_client_info = client_info
        @modern_capabilities = capabilities || {}
        # `session_headers` sends `@protocol_version` as the `MCP-Protocol-Version` header,
        # which the modern lifecycle requires to match the `_meta`-carried version.
        @protocol_version = protocol_version
      end

      def leave_modern_mode
        @modern_client_info = nil
        @modern_capabilities = nil
        @protocol_version = nil
      end

      def probe_discover
        response = send_request(request: {
          jsonrpc: JsonRpcHandler::Version::V2_0,
          id: SecureRandom.uuid,
          method: MCP::Methods::SERVER_DISCOVER,
        })

        if response.is_a?(Hash) && response.key?("error")
          error = response["error"]
          raise RequestHandlerError.new(
            "Server discovery failed: #{error["message"]}",
            { method: MCP::Methods::SERVER_DISCOVER },
            error_type: :internal_error,
          )
        end

        result = response.is_a?(Hash) ? response["result"] : nil
        unless result.is_a?(Hash)
          raise RequestHandlerError.new(
            "Server discovery failed: missing result in response",
            { method: MCP::Methods::SERVER_DISCOVER },
            error_type: :internal_error,
          )
        end

        result
      end

      def client
        require_faraday!
        @client ||= Faraday.new(url) do |faraday|
          faraday.request(:json)
          # The client parses response bodies itself (`resolve_response_body`), so streamed and buffered responses
          # take the same path; Faraday's json response middleware is deliberately left out.
          faraday.response(:raise_error)

          faraday.headers["Accept"] = ACCEPT_HEADER
          headers.each do |key, value|
            faraday.headers[key] = value
          end

          @faraday_customizer&.call(faraday)

          # Register the URL identity guard *after* the user's customizer
          # so it sits closest to the adapter in the request stack. That way
          # the guard sees `env.url` after any customizer-added middleware has had
          # a chance to rewrite it, closing the `env.url = URI("https://...")`
          # bypass that a `Faraday::Connection#url_prefix` check cannot detect.
          faraday.use(OAuthURLGuard, expected_url: @oauth_server_url) if @oauth_server_url
        end
      end

      # Per spec, the client MUST include `MCP-Session-Id` (when the server assigned one)
      # and `MCP-Protocol-Version` on all requests after `initialize`.
      #
      # https://modelcontextprotocol.io/specification/2025-11-25/basic/transports#session-management
      # https://modelcontextprotocol.io/specification/2025-11-25/basic/transports#protocol-version-header
      def session_headers
        request_headers = {}
        request_headers[SESSION_ID_HEADER] = @session_id if @session_id
        request_headers[PROTOCOL_VERSION_HEADER] = @protocol_version if @protocol_version
        if @oauth && (token = @oauth.access_token)
          request_headers["Authorization"] = "Bearer #{token}"
        end
        request_headers
      end

      # Per SEP-2243, mirror the JSON-RPC method and target name/uri into HTTP headers so intermediaries
      # can route and inspect requests without parsing the body. `Mcp-Name` comes from `params.name`
      # (tools, prompts) or, when absent, `params.uri` (resources).
      #
      # https://modelcontextprotocol.io/specification/draft/basic/transports/streamable-http#request-metadata
      def request_metadata_headers(method, params)
        return {} unless method

        metadata_headers = { METHOD_HEADER => method }
        if params.is_a?(Hash)
          name = params[:name] || params["name"]
          name = params[:uri] || params["uri"] unless name.is_a?(String)
          metadata_headers[NAME_HEADER] = encode_header_value(name) if name.is_a?(String)

          if method == MCP::Methods::TOOLS_CALL && (declarations = @mcp_param_declarations[params[:name] || params["name"]])
            arguments = params[:arguments] || params["arguments"]

            metadata_headers.merge!(McpParamHeaders.build(declarations, arguments))
          end
        end

        metadata_headers
      end

      # Learns the `x-mcp-header` declarations of the tools a `tools/list` response advertises,
      # so later `tools/call` requests can mirror the annotated arguments into `Mcp-Param-*` headers (SEP-2243).
      # The custom headers exist on the modern lifecycle only, matching the TypeScript and Python SDKs,
      # so legacy connections learn nothing. Only a valid, non-empty declaration set is kept:
      # an invalid tool definition mirrors nothing,
      # following the spec's guidance to send without custom headers when no reliable declarations are available.
      def capture_mcp_param_declarations(method, params, body)
        return unless modern?
        return unless method.to_s == MCP::Methods::TOOLS_LIST && body.is_a?(Hash)

        tools = body.dig("result", "tools")
        return unless tools.is_a?(Array)

        # An uncursored request answered without `nextCursor` is the complete tool universe,
        # so knowledge about unlisted tools is stale; the registry is rebuilt from this listing,
        # the same pruning the Python SDK applies to complete listings.
        cursor = params.is_a?(Hash) && (params[:cursor] || params["cursor"])
        complete = !cursor && body.dig("result", "nextCursor").nil?
        registry = complete ? {} : @mcp_param_declarations

        tools.each do |tool|
          next unless tool.is_a?(Hash)

          name = tool["name"]
          next unless name.is_a?(String)

          scan = McpParamHeaders.scan(tool["inputSchema"])
          if scan[:valid] && !scan[:declarations].empty?
            next if !registry.key?(name) && registry.size >= MAX_MCP_PARAM_TOOLS

            registry[name] = scan[:declarations]
          else
            registry.delete(name)
          end
        end

        @mcp_param_declarations = registry if complete
      end

      # A header value that is not safe to transmit as-is - non-ASCII, control characters (including CR/LF,
      # which would otherwise allow header injection), or significant leading/trailing whitespace - is wrapped as
      # `=?base64?<base64>?=`. Safe ASCII values are sent unchanged.
      def encode_header_value(value)
        return value if safe_header_value?(value)

        "=?base64?#{[value].pack("m0")}?="
      end

      def safe_header_value?(value)
        value.bytes.all? { |byte| byte.between?(0x20, 0x7e) } &&
          (value.empty? || (!value.start_with?(" ", "\t") && !value.end_with?(" ", "\t"))) &&
          !(value.start_with?("=?base64?") && value.end_with?("?="))
      end

      # Drives the OAuth orchestrator on a 401 from the MCP endpoint.
      # The `WWW-Authenticate` header (when present) supplies the `resource_metadata`
      # URL and an optional `scope` challenge per RFC 9728 Section 5.1.
      #
      # If the provider already holds a refresh token, we try to exchange it
      # for a fresh access token first; only when that fails (e.g., the refresh token was revoked)
      # do we fall back to the full Authorization Code + PKCE + DCR flow.
      #
      # https://modelcontextprotocol.io/specification/2025-11-25/basic/authorization#error-handling
      def run_oauth_flow!(unauthorized_error:)
        params = parse_www_authenticate_from_error(unauthorized_error)
        flow = MCP::Client::OAuth::Flow.new(provider: @oauth)
        return if attempt_refresh(flow: flow, resource_metadata_url: params["resource_metadata"])

        run_full_authorization_flow!(flow: flow, params: params)
      end

      # Drives a full Authorization Code + PKCE flow without first attempting
      # to refresh the access token. Used for the MCP scope-selection-strategy
      # step-up path: the provider already holds a valid access token,
      # but the server returned a 403 with
      # `WWW-Authenticate: ... error="insufficient_scope", scope="..."`
      # per RFC 6750 Section 3.1. Refreshing the existing token would re-issue
      # the same scope set the server already rejected, so the SDK must run
      # a fresh authorization request. The request asks for the union of
      # the currently granted scope and the newly demanded scope; otherwise
      # the caller would lose previously held scopes and trigger another step-up
      # on the next operation that needs them.
      # https://modelcontextprotocol.io/specification/2025-11-25/basic/authorization#scope-selection-strategy
      def run_step_up_flow!(forbidden_error:)
        params = parse_www_authenticate_from_error(forbidden_error)
        flow = MCP::Client::OAuth::Flow.new(provider: @oauth)
        params = params.merge("scope" => escalated_step_up_scope(params["scope"]))

        run_full_authorization_flow!(flow: flow, params: params)
      end

      # Returns the space-separated union of the currently granted scope (read
      # from the stored token response per RFC 6749 Section 5.1) and the scope
      # demanded by the step-up challenge. Duplicates are collapsed; order
      # follows first appearance so existing scopes precede the newly added
      # ones. Returns `nil` when neither side carries a scope so
      # `build_authorization_url` omits the `scope` parameter entirely.
      def escalated_step_up_scope(challenge_scope)
        tokens = @oauth.tokens
        granted = tokens.is_a?(Hash) ? (tokens["scope"] || tokens[:scope]) : nil
        scopes = [granted, challenge_scope].compact.flat_map { |scope| scope.to_s.split }.uniq

        scopes.empty? ? nil : scopes.join(" ")
      end

      # True when the response on `forbidden_error` carries a Bearer challenge
      # with `error="insufficient_scope"` per RFC 6750 Section 3.1 and the MCP
      # scope-selection-strategy section. A 403 without that signal is not a
      # step-up challenge and must not trigger re-authorization.
      def insufficient_scope_challenge?(forbidden_error)
        parse_www_authenticate_from_error(forbidden_error)["error"] == "insufficient_scope"
      end

      def parse_www_authenticate_from_error(error)
        response = error.response || {}
        response_headers = response[:headers] || {}
        header = response_headers["www-authenticate"] || response_headers["WWW-Authenticate"]
        MCP::Client::OAuth::Discovery.parse_www_authenticate(header)
      end

      def run_full_authorization_flow!(flow:, params:)
        # Use the URL snapshotted at `initialize` time so a post-construction
        # mutation of `@url` cannot redirect PRM/AS discovery and the authorize
        # URL to an attacker-controlled host.
        flow.run!(
          server_url: @oauth_server_url,
          resource_metadata_url: params["resource_metadata"],
          scope: params["scope"],
        )
      end

      # Tries to swap a saved `refresh_token` for a fresh access token. Returns truthy
      # on success and falsy on either "no refresh token available" or "refresh attempt failed"
      # (in which case the caller should run the full interactive flow).
      def attempt_refresh(flow:, resource_metadata_url:)
        return false unless refresh_token_available?

        # Use the snapshotted URL for the same reason as `run_oauth_flow!` above:
        # post-construction `@url` mutation must not redirect token-refresh
        # discovery to an attacker-controlled host. Use the query-bearing form
        # so the refresh request's RFC 8707 `resource` claim matches
        # the original authorization request.
        flow.refresh!(server_url: @oauth_server_url, resource_metadata_url: resource_metadata_url)
        true
      rescue MCP::Client::OAuth::Flow::InvalidGrantError
        # The refresh token has been revoked or expired by the AS. Wipe it so
        # the full interactive flow runs fresh on the retry.
        @oauth.clear_tokens!
        false
      rescue MCP::Client::OAuth::Flow::AuthorizationError
        # Transient failure (network, 5xx, AS metadata, etc.). Leave the refresh
        # token in place; the next attempt may succeed and we avoid forcing
        # the user through an interactive reauth for a recoverable error.
        false
      end

      def refresh_token_available?
        tokens = @oauth.tokens
        return false unless tokens.is_a?(Hash)

        !(tokens["refresh_token"] || tokens[:refresh_token]).to_s.empty?
      end

      def capture_session_info(method, response, body)
        return unless method.to_s == Methods::INITIALIZE

        # Faraday normalizes header names to lowercase.
        session_id = response.headers[SESSION_ID_HEADER.downcase]
        @session_id ||= session_id unless session_id.to_s.empty?
        @protocol_version ||= body.is_a?(Hash) ? body.dig("result", "protocolVersion") : nil
      end

      def clear_session
        stop_listening
        @session_id = nil
        @protocol_version = nil
        @server_info = nil
        @connected = false
        @modern_client_info = nil
        @modern_capabilities = nil
      end

      # Opens the standalone GET SSE listening stream on a background thread so server-to-client requests
      # can arrive while the main thread is blocked on its own request (e.g. a tools/call awaiting elicitation).
      # Like the TypeScript and Python SDK clients, the GET is fired without waiting for it to be established.
      def start_listening
        return if @listener_thread&.alive?

        @listener_thread = Thread.new { listen_for_server_requests }
      end

      def stop_listening
        @listener_thread&.kill
        @listener_thread = nil
      end

      # Reconnection semantics match the TypeScript and Python SDK clients: a stream that was established and
      # then closed gracefully is retried indefinitely after the server's `retry:` interval (SSE semantics),
      # while consecutive connection failures - HTTP errors and idle read timeouts both count - stop the listener
      # once they reach `MAX_RECONNECTION_ATTEMPTS`; a successful stream in between resets the count.
      # A 405 stops immediately without retrying, since it is the spec's answer from a server that offers no listening stream.
      def listen_for_server_requests
        stream = SSEStream.new(
          abortable: false,
          max_message_bytes: @max_message_bytes,
          on_request: ->(message) { dispatch_server_request(message) },
        )
        consecutive_failures = 0

        loop do
          begin
            client.get("") do |request|
              request.headers.update(session_headers)
              request.headers["Accept"] = SSE_ACCEPT_HEADER
              request.headers[LAST_EVENT_ID_HEADER] = stream.last_event_id if stream.last_event_id
              request.options.read_timeout = SSE_LISTENER_READ_TIMEOUT
              request.options.on_data = stream.on_data
            end

            consecutive_failures = 0
          rescue MessageTooLargeError
            # Reconnecting would let the server stream the same over-limit event again, so stop listening instead of retrying.
            break
          rescue Faraday::Error => e
            break if e.response&.dig(:status) == 405

            consecutive_failures += 1

            break if consecutive_failures >= MAX_RECONNECTION_ATTEMPTS
          end

          stream.reset_parser!

          sleep(reconnection_delay_seconds(stream))
        end
      end

      # The reconnection delay in seconds: the server's `retry:` value when it sent one and
      # the default otherwise, never shortened, raised to `MIN_RECONNECTION_DELAY_MS` when the server
      # asked for less than that. A `retry:` that is negative or not a run of digits is not a value at all;
      # the SSE parser drops it, so those arrive here as the default rather than as something to guard.
      def reconnection_delay_seconds(stream)
        delay_ms = stream.retry_ms || DEFAULT_RECONNECTION_DELAY_MS

        [delay_ms, MIN_RECONNECTION_DELAY_MS].max / 1000.0
      end

      # Seconds left before `deadline`, floored just above zero so a budget consumed down to the last instant
      # still asks the adapter for a timeout rather than for "no timeout".
      def remaining_reconnection_budget(deadline)
        [deadline - Process.clock_gettime(Process::CLOCK_MONOTONIC), 0.001].max
      end

      def require_faraday!
        require "faraday"
      rescue LoadError
        raise LoadError, "The 'faraday' gem is required to use the MCP client HTTP transport. " \
          "Add it to your Gemfile: gem 'faraday', '>= 2.0'" \
          "See https://rubygems.org/gems/faraday for more details."
      end

      # Determines the logical JSON-RPC body of the exchange after the POST stream finished
      # (or was aborted because the response already arrived).
      def resolve_response_body(stream, response, method, params)
        return stream.response if stream.response

        # 202 Accepted is the server's ACK for a JSON-RPC notification or response; no body is expected.
        # https://modelcontextprotocol.io/specification/2025-11-25/basic/transports#sending-messages-to-the-server
        return if response.status == 202

        content_type = response.headers["Content-Type"]

        if content_type&.include?("text/event-stream")
          # Nothing was parsed during streaming: either the adapter does not support `on_data`
          # (the whole body sits in `response.body`) or Faraday did not pass `env` to `on_data`
          # (Faraday < 2.1; the SSE chunks sit in `buffer`). Parse whichever holds the body.
          unless stream.primed?
            stream.ingest_pending!(response.body)
            return stream.response if stream.response
          end

          # SEP-1699: a graceful close after a priming event (an event with an id) but before
          # the response means "reconnect via GET to resume".
          return await_response_after_disconnect(stream, method, params) if stream.primed?

          raise RequestHandlerError.new(
            "No valid JSON-RPC response found in SSE stream",
            { method: method, params: params },
            error_type: :parse_error,
          )
        elsif content_type&.include?("application/json")
          return parse_json_buffer(stream.buffer, method, params) unless stream.buffer.empty?

          # Adapters without `on_data` support deliver the body via `response.body`; a JSON middleware
          # added by the Faraday customizer may have parsed it already.
          response.body.is_a?(String) ? parse_json_buffer(response.body, method, params) : response.body
        else
          raise RequestHandlerError.new(
            "Unsupported Content-Type: #{content_type.inspect}. Expected application/json or text/event-stream.",
            { method: method, params: params },
            error_type: :unsupported_media_type,
          )
        end
      end

      # Answers a server-to-client request received on an SSE stream by invoking the handler registered via
      # `on_server_request` and POSTing its return value back as a JSON-RPC response; the server ACKs with
      # 202 Accepted. Requests without a registered handler are answered with a "method not found" error.
      # A handler may raise `ServerRequestError` to answer with a specific JSON-RPC error code
      # (e.g. `-1` for a rejected sampling request); any other error is answered with an "internal error".
      # In every case the server is not left waiting, matching how the TypeScript and Python SDKs convert handler
      # failures into JSON-RPC error responses.
      def dispatch_server_request(message)
        handler = @server_request_handlers[message["method"]]
        response = if handler
          begin
            {
              jsonrpc: JsonRpcHandler::Version::V2_0,
              id: message["id"],
              result: handler.call(message["params"] || {}),
            }
          rescue ServerRequestError => e
            {
              jsonrpc: JsonRpcHandler::Version::V2_0,
              id: message["id"],
              error: { code: e.code, message: e.message },
            }
          rescue StandardError => e
            {
              jsonrpc: JsonRpcHandler::Version::V2_0,
              id: message["id"],
              error: {
                code: JsonRpcHandler::ErrorCode::INTERNAL_ERROR,
                message: "Internal error handling #{message["method"]} request: #{e.message}",
              },
            }
          end
        elsif message["method"] == MCP::Methods::PING && (message["id"].is_a?(String) || message["id"].is_a?(Numeric))
          # The ping receiver "MUST respond promptly with an empty response" (MCP ping utility),
          # so an unhandled ping is answered with the empty result rather than Method not found.
          # A JSON-RPC id is a String or a Number; the reference SDKs reject other shapes at
          # schema validation, so a ping carrying one falls through to Method not found instead.
          # The default lives here instead of in `@server_request_handlers`, whose `any?` opens
          # the GET listening stream on connect: a built-in pong must not change listener behavior.
          # A handler registered via `on_server_request("ping")` still wins through the branch above.
          {
            jsonrpc: JsonRpcHandler::Version::V2_0,
            id: message["id"],
            result: {},
          }
        else
          {
            jsonrpc: JsonRpcHandler::Version::V2_0,
            id: message["id"],
            error: {
              code: JsonRpcHandler::ErrorCode::METHOD_NOT_FOUND,
              message: "Method not found: #{message["method"]}",
            },
          }
        end

        send_client_response(response)
      end

      def send_client_response(response)
        client.post("", response, session_headers)
      end

      def parse_json_buffer(buffer, method, params)
        return if buffer.empty?

        JSON.parse(buffer)
      rescue JSON::ParserError => e
        raise RequestHandlerError.new(
          "Failed to parse JSON response: #{e.message}",
          { method: method, params: params },
          error_type: :parse_error,
        )
      end

      # SEP-1699 resumability: the server closed the SSE stream after a priming event
      # without delivering the response. Treat the graceful close like a network failure:
      # wait the `retry:` interval the server asked for (default 1000ms), then reconnect with
      # a GET carrying `Last-Event-ID` so the server can replay the pending response on
      # the standalone stream. Mirrors the TypeScript SDK's `StreamableHTTPClientTransport`
      # reconnection and the Python SDK's `_handle_reconnection` (including its 2-attempt cap).
      #
      # This runs on the caller's thread, so the attempts are bounded by `max_reconnection_wait` as well as
      # by their count: the deadline gates each wait, and what is left of it becomes the read timeout of
      # the resumed stream. A delay that would run past the deadline is never shortened: the client stops
      # reconnecting instead, so the server's `retry:` is honored in full or not acted on at all.
      # https://github.com/modelcontextprotocol/modelcontextprotocol/issues/1699
      def await_response_after_disconnect(stream, method, params)
        stream.abortable = true
        deadline = Process.clock_gettime(Process::CLOCK_MONOTONIC) + @max_reconnection_wait
        gave_up_waiting = false

        MAX_RECONNECTION_ATTEMPTS.times do
          delay = reconnection_delay_seconds(stream)
          if Process.clock_gettime(Process::CLOCK_MONOTONIC) + delay > deadline
            gave_up_waiting = true
            break
          end

          sleep(delay)
          stream.reset_parser!

          # Bound the resumed stream's idle time by what is left of the budget, rather than leaving it to
          # whatever the Faraday adapter defaults to. `listen_for_server_requests` guards its own GET the same way;
          # without this, a caller-supplied adapter with no default read timeout would let a server hold
          # the connection open past the budget by simply sending nothing.
          read_timeout = remaining_reconnection_budget(deadline)

          reconnect_response = begin
            client.get("") do |req|
              req.headers.update(session_headers)
              req.headers["Accept"] = SSE_ACCEPT_HEADER
              req.headers[LAST_EVENT_ID_HEADER] = stream.last_event_id if stream.last_event_id
              req.options.read_timeout = read_timeout
              req.options.on_data = stream.on_data
            end
          rescue StreamAbort
            # The awaited response arrived on the reconnected stream.
            nil
          end

          # Same fallback as `resolve_response_body` for adapters that do not stream via `on_data`.
          if reconnect_response && stream.response.nil?
            stream.ingest_pending!(reconnect_response.body)
          end

          return stream.response if stream.response
        end

        reason = if gave_up_waiting
          "the reconnection delay it asked for would exceed the #{@max_reconnection_wait} second reconnection budget"
        else
          "#{MAX_RECONNECTION_ATTEMPTS} reconnection attempts"
        end

        raise RequestHandlerError.new(
          "Server closed the SSE stream without a response for #{method} after #{reason}",
          { method: method, params: params },
          error_type: :internal_error,
        )
      end
    end
  end
end