- The recovery text told users to move the endpoint to `::1`. A bare IPv6
literal is not a legal URL host — `new URL("http://::1/token")` throws — so
anyone copying that into the Token URL override got a parse error from advice
meant to unblock them. Now `[::1]`, in both the notice and the manual
reproduction guide.
The exemption list still reads `::1`, because that is the host the SDK
compares; only the remedy is bracketed, because that is what a user types.
The comment says so, so neither gets "corrected" into the other.
- Dropped SEP-2207 from all nine files it had reached. I took the label from
the SDK's own source comments, which attribute this check to it — but this
repo already uses SEP-2207 for OIDC refresh / offline_access
(specification/v2_auth_hardening.md, plus an e2e test), so grepping it here
would have turned up two unrelated things. Replaced with plain description
rather than a different SEP number: having guessed wrong once, guessing again
is not the fix.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018MvNbmAtQuWhDvzi4yXDju
Signed-off-by: cliffhall <cliff@futurescale.com>
Closes#2280
InsecureTokenEndpointError appeared nowhere in our source, so it fell through
to the generic auth-failure path and rendered a "Re-authentication required"
banner with a Re-authenticate button. That button can never work: the SDK's
assertSecureTokenEndpoint runs inside executeTokenRequest, the error does not
extend OAuthError, and auth() special-cases it to rethrow rather than start a
fresh /authorize redirect. Clicking re-ran the same flow to the same refusal,
under the raw SDK message, which names the three exempt host literals and
nothing actionable. A terminal configuration error was being presented as a
retryable auth error.
Not specific to *.localhost: it fires for any endpoint outside the SDK's
exemption — host.docker.internal (#1911), a LAN hostname, a reverse-proxy
name, a mistyped scheme.
It is now recognized (core/auth/insecureTokenEndpoint.ts, mirroring
issuerBinding.ts's brand-plus-name classifier and walking cause / data.cause,
since era negotiation and the transport wrappers bury the rejection) and
surfaced as the configuration error it is, naming the endpoint and both ways
out, with no action affordance.
Six paths reach the refusal and all six classify it — the connect handshake,
authenticate() during connect, the satisfied-challenge connect retry, the
post-redirect callback, the command/background path, the deferred tab-visible
resume (which re-armed on every focus, an unbounded loop on a terminal error),
and the banner action. They share one wrapper so a seventh cannot omit the
banner clear, and every clear is scoped to its own serverId: these paths are
asynchronous, so a late continuation for one server must not erase a banner
another raised in the meantime.
Adds oauth-insecure-token-endpoint-http.json to reproduce it, whose issuer is
http://localhost.:8091 — the root-anchored spelling every resolver sends to
loopback but which is none of the SDK's exempt literals. transport.strictPort
keeps that fixture honest, since its port is hard-coded inside the issuer.
Making such an endpoint work has to land in the SDK (typescript-sdk#2591);
this changes the reporting, not the outcome.
Split out of #2282, where it was tangled with the *.localhost origin work for
#1944 — a separate question the reporter is still clarifying.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018MvNbmAtQuWhDvzi4yXDju
Signed-off-by: cliffhall <cliff@futurescale.com>
Adds a multi-name filter to `npm run skills:eval` so a set of related
skills can be iterated together, and makes an unknown name a hard error
rather than an empty run — a typo would otherwise report a green 0/0
that reads exactly like a clean pass of the skill that was meant.
Re-aims two `local-dev` cases and one `test-servers` case that partially
overlapped `AGENTS.md`. Partial overlap oscillates across runs rather
than sitting at zero, so it reads as eval noise instead of a defect in
the case; `docs/skill-authoring.md` now records that failure mode and
the observed scores.
Widens the `test-servers` description to the "Use when …" shape and
points the `testing` skill at it, since anything needing a real server
to run against is a procedure `testing` does not carry. That growth
moves the skill listing from 2,921 to 3,144 of 4,000 characters, so the
figure recorded in AGENTS.md is updated to match.
Signed-off-by: cliffhall <cliff@futurescale.com>
`disable-model-invocation: true` does not merely make a skill prefer `/name` —
the model cannot invoke it at all, and its description is absent from the skill
listing. So "create a PR for #2163", which is how that work actually starts,
could never reach `pr-flow`. The original rationale ("procedures with side
effects we'd invoke by name anyway") conflates invoking a skill, which only
loads instructions, with performing the procedure it describes.
Flipped `pr-flow`, `pre-push-gate`, `board-ops` and `test-servers` to
model-invocable. `user-invocable` is an independent axis, so this is purely
additive — every `/name` still works. `issue-create`, `issue-triage` and
`release` stay deliberate.
`board-ops` is in the set because `pr-flow` and `issue-create` delegate their
card steps to it: a pointer from a model-invocable skill to a manual-only one is
a dead end for the model.
Costs weighed: the listing share goes 1,199 → 2,256 of 4,000, and a spurious
load costs ~250 characters where a missed one costs a wrong base branch or an
unsigned commit. The rules stay resident in AGENTS.md either way — this improves
the odds of getting the procedure too, it does not become the guarantee.
Eval cases committed for all four, measured at RUNS=3: pre-push-gate, board-ops
and test-servers 5/5; pr-flow 4/5, with "take it through to a pull request" at
100% and the Copilot-review case borderline. Three initial cases were replaced
rather than tuned green: their answers are resident in AGENTS.md, so the model
answering without the skill is correct behaviour, not a miss — the rule this
file already records about what makes a valid trigger case.
AGENTS.md's maintenance rule now says to default to `false` and explains why,
so the advice this change walks back does not get re-applied.
Signed-off-by: cliffhall <cliff@futurescale.com>
- skill-manifest: the closing `---` fence must occupy a whole line. `---oops`
was accepted as a terminator, silently truncating the frontmatter and passing
validation — the exact failure the guard exists to catch. Regression cases
added (prefix, trailing whitespace, EOF, CRLF).
- skill-eval: reject a nonzero `claude -p` exit instead of resolving it as an
empty observation. An auth error or rate limit was scoring as "no skill
invoked", which passes every negative case and reads as a trigger miss on
every positive one.
- skill-eval: extract `collectSkillInvocations` / `sampleHit` behind a `main()`
guard and cover them in `skill-eval.test.mjs` — the stream parsing and the
process-outcome handling are unreachable from an eval run's happy path.
- docs/test-servers: annotate the era on every catalogue row. Six legacy rows
carried no annotation under a "unless noted, Modern" default, so the doc sent
readers to the wrong era for the feature they were trying to see.
- docs/quality-gate: `validate` runs four guards, not three; add the
`verify:skills` row and the two new `test:scripts` suites; fix the `#publishing`
fragment left dangling by the split.
- issue-create / pr-flow: delegate the card steps to `/board-ops` rather than
restating its option IDs, which are explicitly unstable.
- issue-triage: the audit counted presence, not cardinality — an issue carrying
both `v1` and `v2` passed a check that claims "exactly one". Same for the five
type labels. Also scope the two milestone checks to board #28.
- AGENTS.md: codify the v1 milestone exception. Every milestone is a v2 release
bucket, so a v1 issue has none to take and the Incoming-milestone invariant
cannot apply to board #11.
- clients/launcher/README: its pointer promised an explanation of why the cli/tui
manifests ship, which the extracted guide does not make.
Signed-off-by: cliffhall <cliff@futurescale.com>
Closes#2163
`AGENTS.md` was one 1,223-line contract loaded in full on every turn, whether
the task was a one-line CSS fix or a release cut. This splits it: rules stay
resident, procedures move to `.claude/skills/`.
- Ten skills under `.claude/skills/`, seven `disable-model-invocation: true`
(invoked by name only, so they cost no listing context and have no trigger
question) and three model-invoked with committed eval cases.
- `AGENTS.md` 1,223 → 380 lines: rules, a skills index, and a project tree
reduced to one line per entry. The removed recipes are not duplicated.
- `README.md` 811 → 105 lines, split into `docs/{architecture,quality-gate,
test-servers,publishing,docker}.md`, and dropped from `CLAUDE.md`'s auto-load.
- `.github/copilot-instructions.md` and its mirroring rule removed — Copilot
reads `AGENTS.md`.
- `npm run verify:skills` (in `validate`, so in `local:gate` and CI) parses each
SKILL.md the way Claude Code does, requires an explicit invocation mode and
eval cases for model-invoked skills, and budgets the listing.
- `npm run skills:eval` runs the committed trigger cases headless.
Signed-off-by: cliffhall <cliff@futurescale.com>