Copilot review round 18. Three of its findings were the same check-then-act:
`planOAuthRevocation` is asynchronous, so the gap between its reads and the
following `storage.clear()` is still a window — shorter than the network one
closed in round 13, but the same shape. An OAuth completion landing at any of
those awaits saved a grant the clear then destroyed.
`OAuthStorage.takeRevocationSnapshot(serverUrl)` reads what revocation needs
and clears the server in ONE synchronous pass over the in-memory state, with
the persist after the mutation. `clearAndPlanRevocation` replaces
`planOAuthRevocation`, and there is no separate `clear` call left in any
caller — the clear cannot be forgotten or reordered.
The snapshot returns values unparsed, deliberately: schema validation is pure
and belongs after the mutation, since running it inside would reintroduce the
`await` this exists to remove.
Two consequences worth naming. A failure of the take-and-clear now REJECTS
rather than returning an outcome, because the state was not cleared and the
caller's contract is that it was; both clients already have a rejection path.
And cross-process atomicity is explicitly not claimed — nothing in this store
takes a lock, every mutation is a read-modify-write over a loaded snapshot, and
`clear` alone always had that property.
Also from round 18:
- The CLI's budget check ran before considering `plan.outcome`, so a key that
needed no network was reported as budget-exhausted — warning that a grant may
be live when that key held none.
- A disconnect failure after a successful clear was reported as "could not
clear OAuth state" in both clients. It now goes to the disconnect channel,
and the success is still reported.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0177mPHAdECD18nLLCTwR5rh
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot review round 14. Two code fixes and a documentation sweep.
- `buildRevocationRequest` ran outside `revokeToken`'s best-effort try.
`encodeURIComponent` throws on a lone UTF-16 surrogate — valid JSON, so it
can reach there from a persisted client id or secret — and every caller has
already cleared its local state by then, so a rejection instead of a `failed`
outcome would break the documented guarantee. Construction is inside the try
now, and the catch reports `params.endpoint` rather than a `url` that may not
exist on that path.
- The fixture's Basic decode turned a malformed percent escape into an Express
500, reporting a bad credential as a server fault rather than as the
`invalid_client` 401 the endpoint means. Decoding failure is failed
authentication.
- Ten places still said revocation happens *before* the clear, which the
reorder in the previous commit made false: the settings-form description, the
`--no-revoke` help text, both READMEs, `docs/mcp-server-configuration.md`,
three JSDoc blocks, and the PR body. Swept, and the ordering is stated where
it is load-bearing rather than asserted in passing. Also merged the two
adjacent JSDoc blocks on `InspectorClient.clearOAuthTokens`.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0177mPHAdECD18nLLCTwR5rh
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot review round 13. Three of its four findings were one root cause, and
it is a design flaw in the premise this PR started from.
Revoking *before* the clear meant the clear waited up to five seconds on the
network — and anything that wrote OAuth state in that window was then deleted
by a clear reasoning about the grant it replaced. A same-server reauthorization
in the TUI (whose Disconnect/Connect accelerators stay live), a stored-only web
clear for a server that becomes active mid-flight, and another CLI/TUI process
writing to the shared file-backed store all hit it.
`revokeStoredOAuthTokens` is therefore split into `planOAuthRevocation` and
`executeOAuthRevocation`, and every caller runs plan → `storage.clear()` →
execute. The snapshot still precedes the clear, because the store is where the
token, the credentials and the endpoint live; but the clear no longer waits on
anything. There is deliberately no single-call wrapper left, so no caller can
reintroduce the racy order by accident.
Fourth finding, same file: `handleConnect` now retires `clearOAuthAttemptRef`
alongside `disconnectAttemptRef`. The server-name check does not cover
disconnect/reconnect to the SAME server — the name still matches on the other
side of it — so a clear still in flight could tear down the session the connect
had just established.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0177mPHAdECD18nLLCTwR5rh
Signed-off-by: cliffhall <cliff@futurescale.com>
Two more review findings, both real.
The shim wrapped `effectiveAuthFetch` only, but the transport is constructed
with the base `this.fetchFn`, and the SDK runs its own discovery from inside
the transport on the 401/refresh leg — so a reconnect with an existing auth
provider could still hit the upstream failure. It now wraps the base fetch,
the same seam `withOAuthEndpointOverrides` uses and the only one that reaches
both paths.
That trades away the previous claim that a captured Network entry shows the
real 404: below the trackers, what they record is the substitution. Rather
than leave that silently misleading, a substituted response now carries
`x-inspector-oauth-metadata-source` naming the URL its body was actually
fetched from — the transport builds its tracker internally, so there is no
seam above it to install into instead. An integration test captures the fetch
the transport is handed and drives it against a real server, since nothing
else proves that wiring.
The wrapper also keyed on URL shape alone, but nothing stops an authorization
or token endpoint from living under `/.well-known/oauth-authorization-server/`;
a POST there returning an ordinary OAuth 4xx would have had its error replaced
by a metadata document. Metadata discovery is a GET, so anything else is now
left alone.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UL9retfvAXRgvi6EWk4SY4
Signed-off-by: cliffhall <cliff@futurescale.com>
The Cancel button POSTed `notifications/cancelled` on every transport. On
a 2026-07-28 Streamable HTTP connection that is the wrong signal — the
spec makes closing the request's SSE response stream the cancellation
signal there and says the notification is neither required nor expected —
so a spec-compliant server acknowledged it 202 and dropped it while the
tool ran to completion.
The SDK already implements the fork, off `transport.hasPerRequestStream`.
Every Inspector connection is wrapped in `MessageTrackingTransport`, which
did not forward that flag, so the SDK read `undefined` and took the stdio
branch on every client — the CLI and TUI included, whose real
`StreamableHTTPClientTransport` advertises it correctly.
The web client needed three more links: its browser transport answers for
the upstream transport that lives on the backend, so it advertises the
flag for `streamable-http` and applies the SDK's `requestSignal` to its
`POST /api/mcp/send`; and `/api/mcp/send`, held open for the whole call,
forwards the browser's disconnect to the upstream `transport.send`.
The test fixture's `toWebRequest` built a Web Request with no `signal`, so
no fixture server could observe a disconnect at all — without that, a test
asserting the cancel reaches the server passes vacuously.
stdio and SSE keep `notifications/cancelled`: they multiplex every request
over one shared channel and have no per-request stream to close. So does
the legacy era, which predates the mechanism.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013hzwzS8UvBsr4yZm7o7sev
Signed-off-by: cliffhall <cliff@futurescale.com>
Clearing the Inspector's OAuth state deleted the local copy of the tokens
and stopped there. The access token — and the refresh token, which is
long-lived by design — stayed valid at the authorization server until they
expired on their own, so a day of connect/disconnect iteration left it
holding grants for sessions that ended hours ago. RFC 7009 §1 describes
exactly that case, and nothing in the repo constructed a revocation
request, so a server author implementing `revocation_endpoint` had no way
to exercise it with the tool that exists to exercise this.
core/auth/revocation.ts builds and sends the request; the three clear paths
call it, so the behavior is written once — web's "Clear OAuth state and
disconnect" (both the active and stored-only paths), the TUI's Auth tab,
and the CLI's --relogin. It runs BEFORE the local clear, because the token,
the client credentials and the discovered `revocation_endpoint` all live in
the store the clear is about to empty. The request names the refresh token
when there is one: §2.1 asks the AS to also invalidate the access tokens
issued under the same grant, so one request covers both halves.
Best-effort by construction. Every path returns a TokenRevocationOutcome
rather than throwing: no advertised endpoint means nothing is sent and that
authorization server behaves exactly as before, and a network error, a
non-2xx, a 5s timeout or an unreadable store is reported and nothing more.
Forgetting the tokens is what the user asked for. `lost_authorization_state`
recovery deliberately skips it — it clears a half-finished flow to retry it,
and an authorization that never completed has no grant to revoke.
Client authentication resolves the preregistered slot first, mirroring
BaseOAuthClientProvider.clientInformation; reading only the dynamic slot
would send no authentication for a server configured with `oauth.clientId`.
The Basic credential is byte-identical to the SDK's applyBasicAuth so this
request and the token request cannot present the same secret differently.
Opt out per server with `oauth.revokeOnClear` (default on, only `false`
written to disk) or per CLI run with --no-revoke. Read at clear time rather
than connect time, so toggling needs no reconnect. Turning it off is a
testing affordance: a client that walks away still holding live tokens is a
case a server author may want to reproduce.
test-servers now advertises `revocation_endpoint` and serves POST
/oauth/revoke, faithful on §2.2 (an unknown token is a success) and §2.1
(revoking a refresh token invalidates the access tokens under the same
grant), with oauth-revocation-http.json / oauth-no-revocation-http.json as
showcase configs.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0177mPHAdECD18nLLCTwR5rh
Signed-off-by: cliffhall <cliff@futurescale.com>
The SDK's `discoverAuthorizationServerMetadata` picks its validation schema
from the well-known filename that resolved rather than from the document that
came back, so anything found at `/.well-known/openid-configuration` is
validated as an OpenID provider document — requiring `jwks_uri`,
`subject_types_supported` and `id_token_signing_alg_values_supported`, three
fields RFC 8414 does not define. RFC 8414 §5 permits that filename for general
OAuth metadata, so a conforming plain OAuth 2.0 authorization server is
rejected; and because the parse throws instead of continuing the candidate
loop, discovery aborts and the connection fails outright.
Filed upstream as modelcontextprotocol/typescript-sdk#2733.
`core/auth/oidcDiscoveryCompat.ts` works around it without fabricating a
field: on a failed RFC 8414 candidate it probes the OIDC candidates the SDK
would try next and, when one returns a document that satisfies
`OAuthMetadataSchema` but fails the OIDC schema, serves that body as the RFC
8414 response so the SDK picks the schema that describes it. A genuine OpenID
provider document is left to the SDK's own OIDC leg. Issuer validation runs
unchanged, since the substituted document is the one the server published.
It wraps `effectiveAuthFetch` — above the fetch tracker, the opposite of
`withOAuthEndpointOverrides` — so the Network tab still records the real 404
and the real probe rather than the substitution.
The candidate derivation mirrors the SDK's `buildDiscoveryUrls`, which a fetch
wrapper cannot call, and a test pins it against that export so the two cannot
drift.
Adds `oauth.asMetadataPath` to the composable test server (mirroring
`oauth.resourceMetadataPath`) and the `oauth-rfc8414-at-oidc-path-http.json`
showcase config that reproduces the failure.
Closes#2172
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UL9retfvAXRgvi6EWk4SY4
Signed-off-by: cliffhall <cliff@futurescale.com>
A modern-era `subscriptions/listen` is a long-lived request: the first
message on its stream must be `notifications/subscriptions/acknowledged`,
and the JSON-RPC `result` for the listen id is reserved as the
graceful-closure marker. A server that answers the listen request with a
bare `result` is saying "acknowledged and closed in the same breath" — the
SDK settles the subscription `graceful` and rejects the pending `listen()`.
The Inspector read that rejection as an ordinary drop: eight re-lists over
roughly a minute, the badge flickering `Reconnecting…`, and a final bare
`Stream ended` that said nothing about why. Accepting the message was
never wrong — it is a well-formed graceful-closure response. The silence
was.
- `core/mcp/subscriptionAck.ts` owns the predicate. The SDK gives this
close no code of its own — it is the same `SdkError(ConnectionClosed)`
any pre-ack close carries — so the predicate reads the message, since
the alternative is refusing to retry a genuinely transient drop.
- The condition is deterministic, so the stream ends on the first
occurrence instead of spending the whole backoff run. Both routes are
covered: the one a subscribe/unsubscribe reaches, and the one a
reconnect reaches when an acknowledged stream drops and the server has
since started refusing.
- A `"never-acknowledged"` status of its own, not `"ended"` — `ended`
means an expected close. It surfaces as the thrown error's message, an
orange "Not acknowledged" badge, and a notice in the panel.
- `subscriptions-never-acknowledged-http.json` reproduces it. It
acknowledges the first listen that subscribes to a resource and refuses
every one after, which is what makes the badge reachable by hand.
Closes#2097
Signed-off-by: cliffhall <cliff@futurescale.com>
parseSSE declared currentEvent/currentData inside the read loop, so an SSE
frame whose data: line arrived in one chunk and whose terminating blank
line arrived in the next was discarded. buffer already carried a partial
LINE across reads; nothing carried a partial FRAME.
Because this is the web client's transport, the dropped frame is a
JSON-RPC response that never settles: the request hangs forever with no
rejection, no console message, and nothing in the Network tab. The
payload does not arrive corrupted, it does not arrive at all, which is
why it presents as a hang rather than an error.
It has not bitten us because Chromium and Firefox happen to deliver whole
frames at the payload sizes this transport currently sees. That is luck,
not a guarantee: chunk boundaries depend on payload size, TCP
segmentation, and any intermediary. The exposure grows with payload size,
so a large resources/read is the most likely first victim.
The fix hoists both out of the loop and adds an end-of-stream flush — a
server that closes without a final blank line has still delivered a
complete frame, and dropping it would lose the last message of every such
stream.
parseSSE is now exported, solely so the test can reach it. That is the
only way to hit this deterministically: driving a real transport cannot
steer where a chunk boundary lands, but a test that supplies the reader
can put it exactly on the terminator.
The test keeps the two PASSING cases (whole frame, split mid-payload)
alongside the three that failed, because they are what make the diagnosis
precise. This is not "SSE parsing is broken" — mid-payload splits are
handled correctly today, and only the frame-terminator boundary loses
data. Verified against the unfixed code: 3 of 5 fail, all 5 pass after.
Signed-off-by: cliffhall <cliff@futurescale.com>
#2114 landed on v2/main, which is the PR this one follows up. Two
conflicts, one of them silent.
The marked conflict was cosmetic: keep v2/main's comment on the
`provider.scope` read, which now notes the getter filters (#2068).
The real one git merged cleanly and would have left dead: #2114's
if (this.oauthConfig.requestRefreshToken === false && requestedScope) {
this.pendingAuthorizationScope = requestedScope;
}
sat directly above this branch's unconditional
`recordAuthorizationRequestScope`, which overwrites the same field a few
lines later. Dropping that gate is what #2117 is for, so it is removed
rather than kept as a no-op.
The two changes compose: the SDK adds `offline_access` only when
`clientMetadata.grant_types` includes `refresh_token`, which the provider
drops while the opt-out is on -- so reading the authorize URL yields the
filtered scope there, exactly what #2114's gated branch persisted.
#2114's third case pinned the gate and inverts here, as its issue
predicted. It now asserts the request is persisted even with the grant
on; that records no new claim, since the request equals what storage
already held.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013hzwzS8UvBsr4yZm7o7sev
Signed-off-by: cliffhall <cliff@futurescale.com>
`trySilentEmaAuth` and `refreshEmaResourceTokens` saved tokens without
ever saving a scope. Both are reached from real paths -- initial EMA
authentication with a cached IdP session, refreshEnterpriseManagedTokens,
and EmaTransportOAuthProvider.tokens -- and each can be the moment a
newly configured or metadata-derived scope first takes effect, so a
silent token response left the previous stored scope standing.
Rather than a third copy of the rule, every EMA mint now ends in one
place: mintEmaResourceTokens reports the scope it requested, and
saveMintedTokens writes tokens and the RFC 6749 5.1 scope together.
The manager's EMA branch drops its own saveScope, which would now be a
redundant second write of the same value; the step-up branch keeps its
own, since it falls back to the challenge's authorizationScopes union
and runs last.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013hzwzS8UvBsr4yZm7o7sev
Signed-off-by: cliffhall <cliff@futurescale.com>
Two more paths had the same defect, both found in review.
`handleStandardAuthChallenge` returns an interactive redirect for
`unauthorized` / `token_expired` / `invalid_token` as well, and its
callback lands in the same completeOAuthFlow -- but the recording was
gated on `insufficient_scope`. Those challenges compute their own
`scopeForAuth`, which can differ from what storage holds, so a silent
token response left the stale scope standing. The read is now one
private helper both entry points call, applied to every redirect.
And `scopeForMint` is not always what the EMA mint asks for: with
neither config nor storage supplying a scope, discoverEmaResourceContext
resolves it from the protected resource metadata's `scopes_supported`,
which is what both exchanges send. `completeEmaIdpAuthorizationAndMint`
now resolves that context itself -- passing it into the mint, so no
extra discovery -- and returns it as `requestedScope` for the manager to
use as the RFC 6749 5.1 fallback.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013hzwzS8UvBsr4yZm7o7sev
Signed-off-by: cliffhall <cliff@futurescale.com>
`provider.scope` is not what the authorization request asked for. The
SDK augments it with `offline_access` when the AS advertises that scope
and the client wants a refresh token, so persisting the provider's copy
after a silent token response understates the RFC 6749 5.1 implied
grant -- the same defect this change exists to fix, one notch smaller.
Read the scope off the captured authorize URL instead, falling back to
`provider.scope` when the URL carries none.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013hzwzS8UvBsr4yZm7o7sev
Signed-off-by: cliffhall <cliff@futurescale.com>
The Server Settings modal edits a stdio server's `env` and `cwd` as
settings, while the transport reads them off the *config* — so #2091's
tracker, which resolves settings through the last write known to have
reached disk, left those two behind: `server.config` still came straight
off a `servers` entry that stops advancing once a list read fails. A save
that landed during such a window kept spawning the child process with the
pre-save environment, while the modal (re-seeded from the tracker) showed
the new value. Credentials live in `env`, so the symptom is the inspected
server failing to authorize rather than a visibly lost edit.
Adds the settings→config mapping to `core/mcp/serverList.ts` — the one
place both sides of the wire can share — and routes the `/api/servers` PUT
write-through and the web client's connect path through it, so the value
persisted and the value spawned cannot be derived differently.
Closes#2096
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0177mPHAdECD18nLLCTwR5rh
Signed-off-by: cliffhall <cliff@futurescale.com>
RFC 6749 5.1 defines an omitted `scope` in a token response as a grant
identical to what was requested, and `resolvePersistedScopeAfterGrant`
already encodes that rule -- but the ordinary authorization leg never
gave it a `requestedScope` to fall back to, so nothing was persisted and
the previous stored scope kept being reported as what the current token
carries.
`authenticate()` now records `provider.scope` as the pending
authorization scope once the authorization URL has been captured, so it
survives the redirect and reaches `completeOAuthFlow`. The
enterprise-managed leg had the same defect for the same reason and is
fixed one level up: it now falls back to `scopeForMint`, which is what
the mint actually asked for, rather than to the raw
`pendingAuthorizationScope` that is undefined on this leg.
A response that does carry `scope` still wins over the request, on both
legs.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013hzwzS8UvBsr4yZm7o7sev
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot review round 11 on #2114. The docs claimed the persisted scope
"self-heals on the next grant"; on the ordinary authorization leg it
did not.
`authenticate()` never set `pendingAuthorizationScope` — only the
step-up paths did — so `completeOAuthFlow` called
`resolvePersistedScopeAfterGrant(tokens.scope, undefined)`. When the
token response omits `scope` (RFC 6749 §5.1: omitted means the grant
matched the request), the fallback was undefined, nothing was saved,
and the stale `offline_access` stayed in storage where
`resolveEffectiveGrantedScope` keeps reporting it as granted.
`authenticate()` now records the scope it actually requested, read once
from the filtering getter so what is recorded is what went out.
Gated on the filter being active rather than applied unconditionally.
The general version is arguably more RFC-correct, but it would change
what lands in storage for every server that never touched this setting,
inside a PR whose contract is that nothing changes unless the box is
unchecked. With the grant declared, request and storage agree and there
is nothing to heal.
Three tests; the omitted-scope one fails when the recording is removed.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013hzwzS8UvBsr4yZm7o7sev
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot review round 10 on #2114 — a defect in round 8's fix, and the
precise loop that fix's extra argument was added to prevent.
`enrichChallengeWithScopes` narrows `requiredScopes` to the *missing*
subset, so a challenge requiring `offline_access tools:write` against a
stored scope that already carries `offline_access` arrives as just
`["tools:write"]`. Passing that narrowed list made the filter read the
server's explicit requirement as inherited and strip it, so
re-authorization would earn the same challenge forever.
Passes `challenge.requiredScopes` — the raw list — instead. The mixed
case is now covered, and fails against the narrowed list.
Also stops the checkbox promising more than the setting delivers: it
does not register anything for a preconfigured or CIMD client, and the
authorization server decides issuance either way. It now says it
declares the grant so the server *may* issue a refresh token.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013hzwzS8UvBsr4yZm7o7sev
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot review round 8 on #2114.
The provider's `scope` getter is not the only request path. Mid-session
`insufficient_scope` recovery builds its union from *raw* storage in
`enrichChallengeWithScopes` and hands it to `mcpAuth` directly, so it
never reads that getter. An `offline_access` inherited from an earlier
grant therefore reappeared during step-up and the SDK re-added
`prompt=consent` with the setting off — the failure this option exists
to prevent, on the one path that bypassed it. The comment claiming the
getter was "the one seam both readers go through" was wrong, and is
corrected to name both.
`handleAuthChallenge` now applies the same filter, gated on the setting
so the default path is untouched. The forced-retry reuses that value,
so filtering once at the computation site covers it.
`scopeForDeclinedRefreshGrant` gains the scopes a challenge requires,
honored exactly like a configured one: stripping a scope the server is
asking for would loop — re-authorize, earn the same challenge, strip it
again.
Three regressions; the inherited-scope one fails when the filter is
reverted.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013hzwzS8UvBsr4yZm7o7sev
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot review round 4 on #2114 — a real gap, not a wording one.
Declining the grant stops the SDK *adding* `offline_access`, but the
Inspector's own storage puts it back. A successful default-on
authorization persists the scope the AS granted
(`resolvePersistedScopeAfterGrant`), `offline_access` included;
`prepareForAuth` reloads it and `authenticate` hands it to the SDK as
`scope`, which sees the token in scope and appends `prompt=consent`
again. So any server that had authorized once could uncheck the box and
still hit AADSTS90094 — the users most likely to reach for the setting
were the ones it did not help.
`scopeForDeclinedRefreshGrant` filters it out of the *request* only,
applied in the provider's `scope` getter — the one seam both
`clientMetadata.scope` and `authenticate`'s `scope:` argument read
through. An `offline_access` the user configured is honored; storage is
never rewritten, so re-checking the box restores the old behavior
instead of finding the value destroyed, and scope-satisfaction checks
still see the real grant. Verified by reverting the filter: the new e2e
regression fails.
Also from that round, both previously suppressed:
The checkbox looked effective under enterprise-managed authorization,
which never builds this provider at all — it authorizes against the
enterprise IdP with a fixed `openid offline_access`
(`ema/constants.ts:16`). It now annotates itself the way the endpoint
overrides do. The existing count assertion covered two such notices and
was named for the overrides alone; it is renamed and expects three, with
a dedicated case pinning the notice to this control so the count cannot
be met by three copies elsewhere.
And "obtains no new refresh token" was another overstatement — the AS
decides issuance, and a preconfigured client is reused with whatever its
registration already permits. Replaced with what the setting actually
controls.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013hzwzS8UvBsr4yZm7o7sev
Signed-off-by: cliffhall <cliff@futurescale.com>
- The SSE branch selects a caller-supplied `eventSourceInit.fetch` as-is, so
it bypassed the challenge observer and a first-time legacy SSE
authorization lost the advertised URL the same way. Observing is passive,
so it is applied to that fetch too while the deliberate no-proxy-wrap rule
stays. Covered behaviorally against a 401-serving server.
- Dropped an `as unknown as typeof fetch` from the new integration test
(banned by AGENTS.md, and it erased the signature); the spy is typed as
`typeof fetch` directly. The `as MCPServerConfig` beside it was
unnecessary too.
- The integration test reused a per-pid OAuth storage file. SDK `auth()`
persists the advertised URL in its discovery state, so a rerun could
satisfy discovery from that cache and pass with the plumbing removed —
which would have quietly falsified the regression check. Fresh mkdtemp
per run, removed in teardown.
Adds observer unit tests (challenge reported, body untouched, 403 included,
silent on success).
Signed-off-by: cliffhall <cliff@futurescale.com>
The challenge-driven plumbing did not reach the default CLI/TUI flow. With
no stored token in the legacy era, InspectorClient deliberately builds the
transport with no authProvider (so the SDK cannot open a browser before the
callback server is listening), which also leaves challenge interception off;
the 401 then surfaces as the SDK's headerless UnauthorizedError and the
runner calls authenticate() with no challenge in hand. So a server serving
metadata only at the advertised path still failed there — including for the
legacy showcase the README instructs.
Add a passive counterpart to the challenge interceptor: an observer fetch
that reports every 401/403 without touching control flow or the body. The
OAuthManager records the advertised URL from it and uses it in
authenticate() and its CIMD pre-registration. Latest-wins, including
clearing when a later challenge advertises none.
Also: the fixture helper dropped an explicitly supplied empty
resourceMetadataPath by truthiness, bypassing validation and silently
reverting to the well-known route.
Covered by a direct-client integration test that drives connect ->
authenticate() against the real server and asserts the advertised path was
requested and the well-known one never was; verified failing without the
fix.
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot review round 3 on #2114.
The unit tests asserted our own `grant_types` array and stopped there.
What actually unblocks an Entra tenant is what the SDK puts in the
authorize URL, and nothing covered that — so an SDK change that stopped
keying its augmentation off `grant_types` would leave AADSTS90094
intact with every test green.
Adds the complementary case to the existing e2e suite, against a real
AS advertising `offline_access`: with the grant declined, the authorize
URL carries neither `offline_access` nor `prompt=consent`, while the
configured scope still goes out. Verified non-vacuous by reverting the
provider conditional — it fails. The positive test alongside it now
also asserts `prompt=consent` is present, which was unasserted despite
being the literal failure in the issue.
Drops an unjustified `as unknown as ServerEntry` I added in the App
test — AGENTS.md forbids it, and it hid a real mismatch (a partial
settings object against a complete one). Typed `ServerEntry` /
`InspectorServerSettings` fixtures instead, so a field added to that
interface later is a compile error rather than a missing value at
runtime. The `constructedOAuth` helper reads through the constructor's
own parameter type and needs no cast at all now.
Scopes the two doc comments that still claimed the flag removes every
`offline_access` — `StoredMCPServer.oauth` and `OAuthProviderConfig`,
both contradicting the caveat already stated elsewhere.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013hzwzS8UvBsr4yZm7o7sev
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot review round 2 on #2114. The setting was described as
guaranteeing "no offline_access, no forced prompt", which is not what
the SDK does.
`startAuthorization` appends `prompt=consent` for any `offline_access`
in the effective scope and never consults `grant_types`, and
`determineScope` skips its augmentation when the scope already carries
it. So the prompt still goes out when the user configured
`offline_access` in Scopes, or left Scopes blank and the resource
advertises it in `scopes_supported`. The flag removes the SDK's
*automatic* augmentation and nothing more; the docs, the help text and
the type say that now.
The form also flags the case a user can act on: opted out while
`offline_access` is still listed in Scopes. Whole-token match, so
`offline_access_extra` does not trip it.
Corrects the Clear stored OAuth state claim too. It clears the local
tokens and client information — it is not a revocation and cannot
reach the AS. A dynamically registered client re-registers on the next
connect (the new registration declaring only `authorization_code`); a
preconfigured `oauth.clientId` is reused unchanged.
Adds the two missing seam tests, both confirmed to fail without the
code they cover: App's connect wiring (deleting the spread fails two of
the three) and an /api/servers POST followed by a read-back, since a
200 alone never proved the opt-out persisted.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013hzwzS8UvBsr4yZm7o7sev
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot review on #2114. The setting was described as taking effect
"immediately", which is wrong twice over.
`applyLiveServerSettings` treats OAuth as connection-time-only, so a
connected client keeps the metadata it was built with — deliberately,
and identically to every other field in that section (client id,
secret, scopes, authorizationParams, endpoint overrides). Not wiring
this one field live; saying "next connect" instead, in the docs, the
checkbox description, and the type.
And two pieces of state outlive the setting: the registration already
held at the authorization server still lists the grant, and a refresh
token issued earlier stays usable, because the SDK's
`refreshAuthorization()` posts the stored token without consulting
`grant_types`. So the stated cost is not guaranteed until stored OAuth
state is cleared. Documented, rather than revoking credentials as a
side effect of a checkbox — Clear stored OAuth state already does that
explicitly.
Also adds the manager->provider seam test the other bridges have:
without it, deleting `requestRefreshToken:` from `createOAuthProvider`
would leave the feature dead with every other test green.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013hzwzS8UvBsr4yZm7o7sev
Signed-off-by: cliffhall <cliff@futurescale.com>
The Inspector always declared `refresh_token` in its OAuth client
metadata. The SDK's `determineScope()` then appends `offline_access`
whenever the authorization server advertises it and the client declares
that grant, and `startAuthorization()` appends `prompt=consent` whenever
`offline_access` is in scope. Against Microsoft Entra ID that forced
consent prompt routes a non-admin user into the admin-consent workflow
and fails with AADSTS90094 — even after a tenant admin has consented.
Adds a per-server "Request refresh token" setting (default on) that
drops the grant from the client metadata, breaking that chain at its
source. Persisted as `oauth.requestRefreshToken` and written only when
off, so entries that never touch it keep a byte-stable round-trip. Web
edits it in Server Settings → Authorization; the CLI and TUI pick it up
from the same per-server settings via `buildRunnerClientAuthOptions`.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013hzwzS8UvBsr4yZm7o7sev
Signed-off-by: cliffhall <cliff@futurescale.com>
An RFC 9728 `WWW-Authenticate: Bearer resource_metadata="…"` challenge was
parsed and then dropped by the normalized `AuthChallenge`, so every
challenge-driven `mcpAuth()` call ran discovery without it and probed
locations derived from the MCP server URL instead. OAuth failed outright
against any server whose metadata document lives off the well-known path.
The SDK handles this correctly inside its own transports, but the Inspector
never reaches that path — it intercepts the 401 and drives `auth()` itself
to capture the authorization URL and run the step-up scope union.
Carry the advertised URL on `AuthChallenge` as a string (it crosses the web
client's remote-backend boundary as JSON), convert it at the OAuth boundary,
and pass it to the standard challenge leg, the forced step-up leg, and CIMD
pre-registration — which runs before `auth()` and did its own discovery. A
malformed value is ignored rather than surfaced, matching the SDK's parser.
The callback leg needs nothing: SDK `auth()` persists the URL in its
discovery state.
Adds an `oauth.resourceMetadataPath` test-server mode that moves the
document off the well-known path entirely, so the integration test proves
discovery genuinely fails without the fix.
Closes#2071
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot review round 2 on #2100, plus a collision the review did not find.
The default app-origin port was 6276 — which is already
RUNNER_OAUTH_CALLBACK_DEFAULT_PORT, the CLI/TUI loopback OAuth callback.
That port is fixed precisely so an OAuth app can pre-register
http://127.0.0.1:6276/oauth/callback, which makes it the one listener here
that cannot move when something takes it first. A running --web would hold
it and break a later --cli/--tui OAuth flow at its registered redirect URI,
and docs/mcp-app-review.md has those two running side by side. This
listener has a documented dynamic fallback, so this listener yields: the
default is now 6278 (6277 skipped — v1's retired proxy port, which the
migration guide tells people to stop forwarding). A test asserts the two
defaults stay distinct.
Review comments:
- POST /api/app-document now applies hono's bodyLimit BEFORE parsing. The
8MiB check ran after c.req.json() had buffered and parsed the whole
request, and bounded only `html` — so bulk in `csp`, or in keys the route
never reads, was fully materialized before the 413.
- `csp` is validated as an HTTP header value and length-bounded. The
controller hands it to res.writeHead() verbatim, where Node throws
ERR_INVALID_CHAR synchronously — inside the handler for a later,
unrelated request, outside this route's error handling.
- The app-origin port now propagates everywhere the other two do: the CLI
--print-handoff port-forward command (and its test), the Dockerfile's ENV
and EXPOSE, and the remote-review SSH recipe in docs/mcp-app-review.md.
Without it an app declaring _meta.ui.domain is unreachable through every
documented remote workflow.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0177mPHAdECD18nLLCTwR5rh
Signed-off-by: cliffhall <cliff@futurescale.com>
Copilot review round 1 on #2100.
- POST /api/app-document: `null` and `[1,2]` are valid JSON, so the
destructure that followed threw OUTSIDE the parse try/catch and turned a
malformed body into a 500 instead of the documented 400.
- app-origin controller: the error handler cleared `server` but not
`origin`, and `publish` gates on `origin` — so an error after a successful
listen kept minting URLs on a dead port and the browser never took the
srcdoc fallback. Clear both, and drop the now-unfetchable documents.
- sandbox proxy: drop a stale `srcdoc` before navigating to a dedicated
origin (srcdoc wins over src), and restore the opaque-origin posture —
strip `allow-same-origin`, reset `innerOrigin` — before assigning `srcdoc`
on the fallback path. Not reachable today (each render remounts the
iframe), but the cost of being wrong about that later is an isolation
boundary.
- publishAppDocument tests: replace two `as unknown as Response` casts with
real `Response`s.
- docs: `frame-ancestors` admits the proxy AND the Inspector page (every
ancestor is checked); the shared helper falls back to loopback, not
`'none'`; the showcase origin is `127.0.0.1`, the default bind address.
- tests: null/array body, post-listen error, and both factories receiving a
working `publishAppDocument`.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0177mPHAdECD18nLLCTwR5rh
Signed-off-by: cliffhall <cliff@futurescale.com>
An MCP App is rendered by handing its HTML to the sandbox proxy as
`srcdoc`, in a frame sandboxed without `allow-same-origin` — the #1565
isolation model. That gives the app document an opaque origin, so every
request it makes carries `Origin: null` and no CORS / OAuth-callback /
API-key allowlist can admit it. `_meta.ui.domain` is the spec field a
server uses to ask its host for a stable, dedicated origin, and it was
being dropped on the floor.
The field is explicitly host-dependent and the Inspector owns no domain
infrastructure, so it treats any non-empty value as a request rather than
an address, and answers with a real loopback origin on its own listener
(MCP_APP_ORIGIN_PORT, default 6276). One shared origin, path-keyed per
document: that delivers what the field is for without minting a port or
DNS name per app, and is therefore not a per-app isolation boundary.
The inner frame is granted `allow-same-origin` on this path only, which
is what makes the origin real. It is not a #1565 regression: the listener
is on its own port, so the app stays cross-origin to both the proxy and
the Inspector. The proxy refuses the grant if the URL's origin equals its
own, and the grant is never reachable from the server-supplied `sandbox`
string, which is still stripped. The per-app CSP is delivered as a real
response header there rather than only as a <meta>.
Every failure path falls back to the default srcdoc render with a console
warning naming the field, rather than blanking the app.
Also fixes a pre-existing `tsc -b` break on v2/main (useServers.test.tsx
passed `metadata: []` where `RequestMetadata` is expected), which has had
CI red since #2087 and blocks the pre-push gate.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0177mPHAdECD18nLLCTwR5rh
Signed-off-by: cliffhall <cliff@futurescale.com>
`checkAuthChallengeSatisfied` answered a `token_expired` challenge with
`isAccessTokenUsable`, which treats "we cannot tell" as "still valid":
`isJwtExpired` returns false whenever the token is not a JWT or carries no
`exp`, and storage never records an absolute expiry (`expires_in` is relative
to an issuance instant that is never persisted).
So for an opaque access token — Doorkeeper, Keycloak in opaque mode,
GitHub-style `gho_…` — the local guess outvoted the resource server's
explicit verdict. Callers short-circuited re-authorization and reconnected
with the same dead credential, looping with no redirect and no ReAuthBanner.
A bare 401 also maps to `token_expired`, so this was not limited to servers
sending `error="invalid_token"`.
Adds `isAccessTokenProvablyUnexpired` beside `isAccessTokenUsable` in
`core/auth/connection-state.ts`: true only for a JWT whose `exp` is still in
the future (same 60s skew). `checkAuthChallengeSatisfied` uses it for the
`token_expired` branch, so absence of local evidence no longer beats the
server, while a provably live JWT keeps its cheap short-circuit.
`isAccessTokenUsable` stays optimistic — it is the right default for
displaying authorization state, and flipping it would show every
opaque-token server as unauthorized.
Closes#2051
Signed-off-by: cliffhall <cliff@futurescale.com>
One conflict, in `clients/tui/__tests__/App.test.tsx`: both sides added an
`opts` capture to the test harness's `FakeClient` for different fields —
`defaultMetadata` on v2/main (#1910), `environment.fetch` here (#2067) — so the
resolution is the union of the two, keeping both rationales and both tests.
Everything else auto-merged. `npm run ci` passes on the result.
Signed-off-by: cliffhall <cliff@futurescale.com>
Addresses review round 7 on #2099 (three suppressed comments).
- Proxy variables are now cleared for the WHOLE of `transport.test.ts` and
`cli.test.ts`, not just around the proxy tests. Measured: undici's
`EnvHttpProxyAgent` captures its proxy URLs when it is CONSTRUCTED and re-reads
only NO_PROXY per request, so with the process-wide memo, any earlier test that
connects on a machine with an ambient proxy would pin the agent to it and a
later test setting HTTP_PROXY would be talking to an agent that is not
listening. Clearing up front means nothing can build the singleton before the
proxy tests do, and restoring only in the file-level afterAll means the memo
cannot be left bound to a closed test proxy.
Both suites verified green under a hostile ambient env
(`HTTP_PROXY`/`http_proxy`/`HTTPS_PROXY` pointed at a dead port). In fairness
this is hardening rather than a fixed failure: the concrete cross-test break
did not reproduce with the current test order — but it depends on test order
and on the developer's environment, which is exactly what this removes.
- The guard's failure message said a package "is declared external but was
inlined" even for a candidate that came only from the root dependencies —
i.e. #2067's own shape, where the missing `external` entry IS the bug, so the
message contradicted the config it was asking the reader to check. It now
words the failure by candidate source, and says to add the entry.
The capture-at-construction behavior is documented on `createProxyFetch`, since
it is the reason the suites are structured this way.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JTHVxSu8AUgHRLvo1ntZ8H
Signed-off-by: cliffhall <cliff@futurescale.com>
Addresses review round 5 on #2099 (three suppressed comments, no posted ones).
The `fetch: createProxyFetch()` line in each Node client is the whole of that
client's proxy support — it is what puts the proxy at the BOTTOM of the fetch
stack, where InspectorClient's wrappers compose over it rather than discarding
it. `InspectorClient` sets `fetchFn` unconditionally, so the transport-level
fallback never fires for these clients. Both lines could have been deleted with
every existing test still green.
- CLI: a test that runs a real `tools/list` against a real HTTP test server with
HTTP_PROXY pointed at a real forwarding proxy, asserting the request traversed
it. Behavioral rather than structural on purpose — the defect this replaces was
a runtime dispatch failure no structural assertion would have caught. It clears
all six proxy vars first so an ambient value cannot route it elsewhere.
- TUI: the mock added earlier always returned undefined, so the proxy branch was
never exercised. `createProxyFetch`'s return is now controllable, and two tests
assert the sentinel reaches `environment.fetch` when a proxy is configured and
that the slot stays unset when one is not.
Both were confirmed to fail with their client's wiring line removed.
Also updates the `InspectorClientEnvironment.fetch` doc in core/mcp/types.ts,
which still told callers that Node leaves this undefined and uses the global
fetch.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JTHVxSu8AUgHRLvo1ntZ8H
Signed-off-by: cliffhall <cliff@futurescale.com>
Addresses review round 4 on #2099 — three posted comments and three suppressed
ones, all valid.
- A rebuilt Response reported `url: ""`, `redirected: false`, and
`type: "default"` even after undici followed a redirect: a fetch-contract
regression visible only to proxy users, and one `core/auth/endpointOverrides.ts`
explicitly guards against by declining to rebuild at all. This adapter has no
such choice — the response arrives from the wrong realm — so it now reinstates
the three with `defineProperty`.
- Normalizing a `Request` input dropped every option the Request itself carried
beyond method/headers/body/signal. Most visibly `redirect`: a
`new Request(url, { redirect: "manual" })` started following redirects instead
of surfacing them. All of them are now carried through, with an explicit
`init` still winning per the fetch contract.
Both are covered by tests driving a real redirect through a real proxy, and
both were confirmed to fail without the fix.
- `@modelcontextprotocol/ext-apps` was added only to the CLI's `external` list.
AGENTS.md requires every root-declared runtime dependency in all three, since
which client reaches it is a function of what `core/` imports rather than of
the client's own code. Added to the web runner and TUI lists too.
- The `BUNDLED_CLIENTS` test compared the hard-coded list against a hard-coded
copy of itself, so a new tsup-bundled client would have left it green while
going unchecked. It now discovers clients from disk (a client is tsup-bundled
iff it ships a tsup config) and compares. Verified it fails when a stub client
is added.
- AGENTS.md's project tree still described `core/mcp/node/` as only the stdio
transport factory; it now carries `proxyFetch.ts` and its role.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JTHVxSu8AUgHRLvo1ntZ8H
Signed-off-by: cliffhall <cliff@futurescale.com>
Addresses the Copilot review on #2099.
- `/api/fetch` used the bare global `fetch`. That route is the browser's only
way out to the network — the web client's `environment.fetch` is
`createRemoteFetch()`, which forwards OAuth discovery and token requests
there — so a corporate-proxy user could connect to a server but never
authorize against it, and the PR's "OAuth is proxied now" claim held for the
CLI and TUI but not for web. It now uses the same proxy-aware base fetch, with
an integration test driving a real forwarding proxy (confirmed failing without
the fix).
- `verify:bundle-externals` only recognized an inlining that produced a
`<pkg>-HASH.js` chunk. A *statically* imported package is folded into
`index.js` and emits no chunk, so it would have passed. Detection now keys off
esbuild's `// <path>` module banners, covering both shapes. Because that
depends on unminified output, a bundle with no banners now fails as such
rather than reporting clean — enabling `minify` cannot silently retire the
check. Tests cover the entry-inlined case, the same-prefix case
(`undici-types` must not read as `undici`), and the no-banner case.
- The pre-push pipeline summaries in AGENTS.md, README.md, and
.github/copilot-instructions.md still described `verify:build-gate → smoke`
and omitted the new gate.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JTHVxSu8AUgHRLvo1ntZ8H
Signed-off-by: cliffhall <cliff@futurescale.com>
Corporate-proxy users could not connect to any remote MCP server from v2.
Two independent defects, both reported in #2067.
1. The web and TUI bundles inlined undici. It was declared in the root and
`clients/cli` manifests but named in no client's tsup `external` list, and
tsup auto-externalizes only what the *nearest* manifest declares — so
esbuild inlined 1.05MB of it into `clients/{web,tui}/build/`. undici is
CommonJS, so the emitted chunk's `require("assert")` hit esbuild's ESM
`__require` shim and threw `Dynamic require of "assert" is not supported`.
The rejected `import()` surfaced as "the `undici` package is not available",
telling users to install a package that was already present — and could not
have helped, because the specifier had been rewritten to a relative chunk at
build time.
2. `withProxyDispatcher` injected a *userland* undici `EnvHttpProxyAgent` into
Node's *built-in* fetch. That couples two different copies of undici at the
dispatcher handler interface, which is not stable across majors: Node 22
embeds undici 6, Node 24 embeds 7, Node 26 embeds 8. A userland undici 8
agent handed a built-in undici 7 handler is rejected with
`fetch failed: invalid onRequestStart method`, and the request never leaves
the process. So fixing the bundling alone would only have converted the
web/TUI failure into the CLI's.
Both halves of the pair now come from userland undici — its `fetch` and its
`EnvHttpProxyAgent` — which keeps the handler inside one copy and works
unchanged from the Node 22.19 engine floor through Node 26. Deleting the
wrapper in favor of Node's native `NODE_USE_ENV_PROXY` was not an option:
measured, it is unsupported on 22.19 (the floor) and only lands mid-22.x.
Because undici's `Response` is a different class from `globalThis.Response`,
the proxied fetch re-wraps each response as a genuine global `Response`,
streaming preserved. Without that, `res instanceof Response` is false for
callers that test it — including the SDK's OAuth error formatter, which would
degrade every message to `Raw body: [object Response]`.
The proxy now sits at the bottom of the fetch stack (`environment.fetch` for
the Node clients, and the `createTransportNode` default for the web backend,
its one caller that supplies no `fetchFn`) rather than wrapping the transport's
fetch. Proxying means *substituting* the fetch, not decorating one, so wrapping
a supplied `fetchFn` would discard it; installing it underneath lets
InspectorClient's own wrappers compose over it. A side effect worth having:
OAuth discovery and token requests go through `environment.fetch` too, and were
never proxied before.
Guarding it:
- `undici` is added to all three tsup `external` lists and removed from
`clients/cli/package.json`, so it is root-declared only, per the placement
rule in AGENTS.md. The two installs had already drifted (root 8.5.0 vs cli
8.9.0).
- New `npm run verify:bundle-externals` fails if any package a client declares
external was inlined into that client's bundle anyway. It reads the *built
output*, not the config — those two disagreed for four releases — and derives
what to check from each client's own `external` array, so a newly
externalized package is covered without editing the guard. Verified against
the real pre-fix artifact, which it flags.
- The proxy tests now drive a real forwarding proxy rather than a mock. That
matters: defect 2 was a runtime interface mismatch, which no mock can catch
because no mock ever dispatches.
AGENTS.md's must-not-bundle rule (added by #2082) is extended with why undici
slipped past it, and notes the `node -e` trap — probing the bundled chunk with
`node -e` falsely succeeds, because it exposes a global `require` that
satisfies esbuild's guard.
Closes#2067
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JTHVxSu8AUgHRLvo1ntZ8H
Signed-off-by: cliffhall <cliff@futurescale.com>
A regression from the previous commit. The object branch was a spread, which
*defines* properties and is therefore safe; rewriting it into a per-key loop to
filter unserializable values turned it into `out[key] = value`, which *sets* —
so a persisted `"__proto__"` key vanished on reload and, with an object value,
gave the returned metadata a caller-controlled prototype. The legacy branch had
already been fixed for exactly this.
Fixed at the root rather than the site: both branches now go through one
`defineMetadataKey`, so a change to how one stores a key cannot leave the other
behind. That split is what let the earlier fix fail to protect this path.
The test uses `JSON.parse('{"__proto__":…}')`, not an object literal — a
literal `__proto__:` key sets the prototype at construction and creates no own
property, so a test written that way passes against the broken code. Confirmed
by reverting the line: only the parsed case fails.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0177mPHAdECD18nLLCTwR5rh
Signed-off-by: cliffhall <cliff@futurescale.com>
Two credential leaks, the same class already fixed for the client logger:
`serverList` printed the malformed entry verbatim — a legacy row missing `key`
still holds whatever the user configured — and the CLI overflow error echoed
the whole `key=value` pair into stderr and CI logs. Both now name the key and
the offending *type*; a test plants a `sk-live-…` and asserts it appears
nowhere while the key still does.
`normalizeStoredMetadata` now also drops a value that parses but cannot be
sent. A hand-edited catalog is the reachable source: it is parsed server-side,
so `1e400` really does become `Infinity` there, and the next write would store
`null`. Filtered per key, matching the per-item salvage this file already does
elsewhere, so one bad value does not cost the user the rest.
Deliberately *not* added to the `/api/servers` guard, which review also
suggested. Writing that test is what showed why: a client's own
`JSON.stringify` turns `Infinity` into `null` before the request is sent, so
the wire cannot carry the bad case at all — and the check made things worse,
rejecting the whole metadata field where the normalizer drops one key. The
guard stays a container check, with a comment recording both points.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0177mPHAdECD18nLLCTwR5rh
Signed-off-by: cliffhall <cliff@futurescale.com>
The copy said `progressToken` may be "an integer" while the implementation
validates with `ProgressTokenSchema` — zod's `.int()`, which rejects anything
past `Number.MAX_SAFE_INTEGER`. This repo's own tests assert that
`MAX_SAFE_INTEGER + 1` is dropped, so the documentation was promising a value
the client discards.
Corrected in all three places, so the code comment, the docs callout and the UI
hint agree: `dropInvalidReservedMeta`'s doc block (which review did not flag),
the `metadata` reserved-keys callout, and the Request Metadata hint.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0177mPHAdECD18nLLCTwR5rh
Signed-off-by: cliffhall <cliff@futurescale.com>
- `JsonValue` admits `undefined`, so `RequestMetadata` accepted values that do
not survive serialization: `JSON.stringify` drops an `undefined` object
member and rewrites an `undefined` array element to `null`. The type
contradicted the one promise this payload makes. Added `StrictJsonValue` /
`StrictJsonObject` and used them for the metadata path.
Deliberately not a change to the repo-wide `JsonValue`: for tool *arguments*
`undefined` legitimately means "not supplied". The narrowing is sound
wherever it lands here, since every one of these values comes from
`JSON.parse`, which cannot produce `undefined`. The CLI's `parseKeyValuePair`
needed the same tightening — caught by `clients/cli`'s typecheck, which the
web `tsc -b` does not cover.
- Nothing asserted the JSON worker's annotations, and the wrapper's own "Not
valid JSON" message comes from our parser rather than from Ace — so a broken
worker URL would have left every test passing while the gutter diagnostics
silently disappeared. Added a Storybook play function that waits for a real
`session.getAnnotations()` error entry, and verified it fails when the worker
module URL is pointed at a bad path.
- `aria-describedby` referenced only the error, so a supplied `description` was
never announced and would have been dropped entirely once the draft went
invalid. Both ids are referenced now, with the description surviving the
error.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0177mPHAdECD18nLLCTwR5rh
Signed-off-by: cliffhall <cliff@futurescale.com>
`progressToken` was not the only reserved key. The pinned SDK's
`RequestMetaSchema` also constrains `io.modelcontextprotocol/related-task` to
`{ taskId: string }`, and a conforming server rejects the *whole request* over
one bad reserved member rather than ignoring that key. Before #1910 every value
was a string, so only `progressToken` could be wrong; the widening made all of
them reachable.
Replace both hand-rolled checks with the SDK's schemas — `RequestMetaSchema`
for the payload, `ProgressTokenSchema` for the single value. The schema is
loose, so unknown keys pass through untouched, and zod reports the offending
top-level key as `issue.path[0]`, so only that member is dropped and its
siblings survive. A member the SDK constrains in a later release is then
covered without anyone remembering to add it — which is the drift that produced
the `isInteger`/`isSafeInteger` bug one round ago.
`name` was hard-coded, and react-ace uses it as the editor container's DOM id,
so two instances emitted duplicate ids. Derived from the per-instance id, and
deliberately distinct from the id given to the textarea — that one is what the
wrapper's `<label for>` targets, so reusing it would just move the collision.
The docs table, the docs prose and the form hint all claimed "any JSON" without
qualification, presenting a configuration as valid that the client then drops.
All three now name the reserved keys and say what happens to a bad one.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0177mPHAdECD18nLLCTwR5rh
Signed-off-by: cliffhall <cliff@futurescale.com>
- `isProgressToken` used `Number.isInteger`, but zod 4's `.int()` rejects
anything past `MAX_SAFE_INTEGER` — verified against the pinned zod — so an
unsafe integer passed the guard and was left for the server to reject. Now
`isSafeInteger`, with the boundary covered in both directions.
- `echoed` held only what this component last emitted, so it went stale the
moment an external value was applied: A → B → A stranded the editor on B,
because the second A matched the entry left from before B arrived and was
dismissed as our own echo. It now advances to whatever is on screen.
- `Input.Wrapper` associates a *Mantine* input through context, and Ace is not
one — it renders its own DOM. The wrapper's label and error node therefore
pointed at nothing: the editor was never marked `aria-invalid`, never
described by the error text, and its visible label did not focus it. Wired
explicitly through the wrapper's id in an effect.
- Removed two leftover `[dbg]` logs an earlier regex cleanup missed.
- Documented the editor integration and the shared `cssVariablesResolver` in
the web README, per the rule about new dependencies and patterns. Both
footguns are recorded: the `?url` worker import, and the gutter override
keying off Ace's cssClass rather than the theme module name.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0177mPHAdECD18nLLCTwR5rh
Signed-off-by: cliffhall <cliff@futurescale.com>
The warning added one commit earlier echoed the rejected value. That is the
same leak class as the `servers/show` fix: `_meta` now carries arbitrary JSON,
so an invalid `progressToken` can be an object holding credentials — and this
logger is persisted by real clients (`clients/tui/src/logger.ts` writes it to
`~/.mcp-inspector/auth.log` via `pino.destination`, append mode).
Log `{ received: describeJsonType(value) }` instead — "object", "array",
"number". That is what makes the warning actionable; the value itself only
leaks.
Test asserts the record is exactly `{ received: "object" }` and that the
planted secret appears nowhere in the captured calls.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0177mPHAdECD18nLLCTwR5rh
Signed-off-by: cliffhall <cliff@futurescale.com>
`RecordedRequest.metadata` was still `Record<string, string>`, so the recorder
advertised a string-only contract it no longer honors. The new CLI tests assert
objects and arrays against it and passed only because `toEqual` does not
enforce the declared type.
Typed as `Record<string, unknown>` rather than core's `RequestMetadata`:
test-servers compiles standalone (`tsc -p test-servers`, NodeNext, no `paths`),
so it has no `@inspector/core` alias to import through.
Also update `progressTokenOf`'s doc comment, which still claimed an invalid
token "reaches the wire inside `_meta`" — untrue since mergeMeta started
deleting it. It now names the split: progressTokenOf governs callback
correlation, mergeMeta governs wire sanitization, both via isProgressToken.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0177mPHAdECD18nLLCTwR5rh
Signed-off-by: cliffhall <cliff@futurescale.com>
